Ddog YARDMASTER 202S User manual
YARDMASTER 202S
Training Collar System
Operating Guide
Please read this entire guide before using this product.
Important Safety Instructions
Warning – failure to follow these warnings and the usage instructions could result in
serious injury or death.
DO NOT use the static stimulus feature of the collar on dogs with an aggressive temperament.
This may cause them to inflict injuries to the dog owner or others. If you are unsure whether
this product is appropriate for your dog, please consult your veterinarian or certified trainer.
DO ensure that you comply with the fitting instructions in this manual for the collar. Skin
damage (such as redness or bed sores) may develop when a collar has been worn for too long
or made too tight around your dog’s neck. To prevent injury to your dog, please ensure that:
the collar has been fitted properly in accordance with the instructions in the manual
the prongs on the collar do not exert excessive pressure on your dog’s neck
the collar is not worn for more than 12 hours per day
the collar is repositioned on your dog’s neck every 1 to 2 hours
the contact area of the collar is examined daily for signs of skin damage (redness or
sores).
Some dogs are more prone to developing skin conditions than others. It is advised that you
examine the contact area regularly when you first fit the product on your dog to ensure that
your dog is tolerant of the pressure exerted by the collar on its skin. If skin damage occurs
due to the use of the collar, discontinue use of the collar immediately until the damaged area
has healed. If this condition persists beyond 48 hours, consult your local veterinarian.
The collar is designed and tested on dogs and dogs only. DO NOT use the collar on humans
or other animals apart from dogs.
The collar is not a toy. Keep the collar, remote transmitter and the adapter cords out of reach
of children.
DO NOT OPEN THE ENCLOSURE OF THE COLLAR, REMOTE TRANSMITTER OR THE
POWER ADAPTER AT ANY TIME. There are no user-serviceable parts inside. There is a
serious risk of electric shock, fire or death if items are opened.
DO NOT use the adapter with any other equipment.
3
QUICK START GUIDE
STEP 1 Power Up
Both the remote transmitter and the receiver collar are shipped with a full charge and
can be used right away.
(a) Remote Transmitter: turn the function dial on the remote transmitter from
OFF to any other position. Make sure that the LED light is switched on and
turns into a solid green color to indicate that the remote transmitter is ready for
use.
(b) Receiver Collar: press the blue ON/OFF button at the front of the collar and
wait for the LED indicator light to turn into a solid green light.
STEP 2 Pairing the device
By default, the receiver collar and the remote transmitter have already been paired
prior to shipment. To test whether or not the two devices have been properly paired,
press the toggle button (if required) until the LED light next to the number “1” is
switched on, then press the sound button on the remote transmitter and see whether
the receiver collar responds with an audible tone signal.
Press
If an audible tone signal is detected, it means that the two devices have been
properly paired. Otherwise, please go through the pairing instructions on page 11 of
this operating manual.
STEP 3: Using the collar
The collar should now be ready for use. See pages 10-11 of this operating manual for
an explanation on how to use the various features of the collar.
4
Table of Contents
1. How does the DDOG® YARDMASTER 202S work?..................................5
2. Included Components ......................................................................................5
3. Product Diagrams..............................................................................................6
4. Technical Specifications..................................................................................6
5. Features ...............................................................................................................7
6. Unboxing the YARDMASTER 202S for the First Time..............................7
7. Using the YARDMASTER 202S for the First Time....................................7
8. Testing the Static Stimulus Function ...........................................................8
9. Fitting and Powering On the Collar ..............................................................9
10. Sound/Tone Function .....................................................................................10
11. Vibration Function..........................................................................................10
12. Static Stimulus Function .............................................................................. 11
13. Pairing a Remote Transmitter with a Receiver Collar........................... 11
14. Charging the receiver collar and the remote transmitter ....................12
15. Replacing the plastic collar strap with the spare nylon strap............13
16. Frequently Asked Questions .......................................................................14
17. Terms of use and limitation of liability .....................................................15
5
1. How does the DDOG® YARDMASTER 202S work?
The DDOG® YARDMASTER 202S Training Collar System offers a simple and effective way
for home users to train their dogs. By pairing a remote transmitter with a receiver collar, a
user can control the exact moment when a dog will receive a tone, vibration or static
response on the receiver collar. The level of intensity is adjustable for static stimulation (8
levels) and fixed for tone and vibration signals (1 level each). The end result is a training
system that allows users to teach basic obedience commands or thwart unwanted behaviors
using one or a mix of different signals that can be triggered at such time and at such level of
intensity as the users themselves determine as appropriate.
2. Included Components
The following components are included when you purchase the DDOG® YARDMASTER
202S Training Collar System:
Wrist Strap (x1)
Receiver Collar (x1)
Power Adapter (x1)
Test Light Tool (x1)
Remote Transmitter (x1)
Charging Cable (x1)
Nylon Strap (x1)
Nylon Strap Harnesses (x2)
Operating Manual (x1)
6
3. Product Diagrams
(a) Remote Transmitter
(b) Receiver Collar
4. Technical Specifications
(a) Remote Transmitter
Weight ：45g
Dimensions: 10*4*2cm
7
(b) Receiver Collar
Suitable neck size：15cm – 53cm (collar strap is adjustable to fit different neck sizes)
Weight ：110g
Dimensions: 8*3.5*4.5cm
5. Features
8 levels of static stimulation and 1 level of vibration and tone signals
500 meters of reception in open field
100% waterproof
Rechargeable and durable
Intuitive transmitter design avoids the need for pre-programming or function toggling
during use
On/off switch on both the remote transmitter and receiver collar to extend battery life
Two color LED light on both the remote transmitter and receiver collar to indicate
different statuses
Patented flexible probes ensures good contact with the dog’s skin
Train up to 3 dogs at the same time using a single remote transmitter
6. Unboxing the YARDMASTER 202S for the First Time
Please check that all of the components listed on page 5 have been shipped with the
packaging box. If any of the components are missing, please contact us or your local
distributor (as appropriate) for customer support.
The remote transmitter and the receiver collar are shipped with a full charge and are ready
for immediate use. Please follow the instructions in the next section on how to use the
DDOG® YARDMASTER 202S Training Collar System.
7. Using the YARDMASTER 202S for the First Time
When using the DDOG® YARDMASTER 202S Training Collar System for the first time, you
should make sure that the receiver collar has been properly paired with the remote
transmitter.
Test for proper pairing
1. To test whether the pairing between the two devices has been properly configured,
switch on the receiver collar by pressing the blue “On/Off” button at the front of the
collar.
Sound Activated Sensor
On/OffButton
Sound Activated Sensor
On/OffButton
8
2. Next, adjust the function dial on the remote transmitter to a position other than OFF and
press the toggle button (if required) until the LED light next to the number “1” is switched
on to indicate that the remote transmitter will operate at the transmission frequency of
the first paired receiver collar (which by default is the receiver collar that is shipped
alongside the remote transmitter).
3. Next, press the sound button on the remote transmitter and see whether the receiver
collar responds with an audible tone signal.
Press
If an audible tone signal is detected, it means that the two devices have been properly paired.
Otherwise, please go through the pairing instructions on page 11 to pair the receiver collar
with the remote transmitter.
8. Testing the Static Stimulus Function
A test light tool is included with the packaging box for the purpose of testing the static
stimulus function of the collar.
1. To begin testing, place the test light on top of the metal probes as shown below.
Sound Activated Sensor
On/OffButton
9
2. Then rotate the function dial to a level higher than 2 (otherwise the light emitted will be
too weak to notice) and press the static button on the remote transmitter to trigger a
static stimulus on the receiver collar. If the static stimulus function is working properly,
the test light will start flashing.
Press
9. Fitting and Powering On the Collar
The receiver collar should be fitted snuggly across the top of the dog’s neck (as opposed to
hanging it loosely at the bottom of the neck), yet loose enough to allow the user to slide one
finger inside the strap. The collar casing should be positioned at the front and center of the
neck and not rotated to either side. Both of the metal probes underneath the collar unit
should be in good contact with the skin as shown below. For dogs with thick coats, it may be
necessary to trim the hair underneath the collar unit to ensure that the probes are in good
contact with the skin. Once the collar unit has been fitted, trim down the excess strap to a
suitable length, if required.
Sound Activated Sensor
On/OffButton
Indicator Light (Red/Green)
10
The plastic collar strap can be removed and replaced with the spare nylon strap that comes
with the packaging. See page 13 for detailed instructions on how this is done.
Press the blue “On/Off” button at the front of the collar. If a solid green light stays on after
momentarily flashing in green and red color, it indicates that the collar is ready for use.
10.Sound/Tone Function
The sound button on the remote transmitter is the trigger for a tone signal on the receiver
collar. Each time the sound button is pressed, provided that the collar and the remote
transmitter are both switched on, a single tone signal will be generated. The collar is pre-set
with only one level of tone signal, so unless the function dial has been parked at the OFF
position, all other positions on the function dial will generate the same identical tone signal
when the sound button has been pressed. If the sound button has been held down, a
continuous stream of tone signals will be generated with a short time gap between each tone
signal.
Press
11. Vibration Function
The vibration button on the remote transmitter is the trigger for a vibration response on the
receiver collar. Each time the vibration button is pressed, provided that the collar and the
remote transmitter are both switched on, a single vibration response will be triggered. The
collar is pre-set with only one level of vibration response, so unless the function dial has been
parked at the OFF position, all other positions on the function dial will generate the same
identical vibration response when the vibration button has been pressed. If the vibration
button has been held down, a continuous stream of vibration responses will be generated
with a short time gap between each vibration response.
Sound Activated Sensor
On/OffButton
Sound Activated Sensor
On/OffButton
This manual suits for next models
1
Table of contents
Other Ddog Pet Care Product manuals
