Dayva HS041-2 User manual
1
INSTRUCTIONS
DAYVA
PREMIERE
OUTDOOR
HEATER
Model HS041-2
By
The Dayva Premier Outdoor heater
is another fine product from Dayva
International. Dayva is the leader in
accessories for the outdoor market.
Dayva prides itself in delivering
qualityproductsatreasonableprices
for almost 30 years.
Thank you for choosing Dayva!
Manufactured Exclusively for Dayva International
7441 Vincent Circle, Huntington Beach, CA 92648
Tel: 714-842-9697 • Fax: 714-842-5759
US Patent # 325,963
Other US Patents Pending.
Foreign Patents Pending.
2
Assembly, Installation & Instruction Manual
DAYVA PREMIERE
OUTDOOR HEATER
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE
WARNING:
THIS APPLIANCE IS DESIGNED FOR
OUTDOOR USE ONLY
WARNING:
IMPROPER INSTALLATION,
ADJUSTMENT, ALTERATION,
SERVICE, OR MAINTENANCE CAN
CAUSE INJURY OR PROPERTY
DAMAGE. READ THE ASSEMBLY,
INSTALLATION, OPERATING, AND
MAINTENANCE INSTRUCTIONS AND
ALL WARNINGS THOROUGHLY
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT
FOR YOUR SAFETY:
IF YOU SMELL GAS:
1. SHUT OFF GAS TO THE
APPLIANCE
2. EXTINGUISH ANY OPEN FLAME
3. IF ODOR CONTINUES,
IMMEDIATELY CALL YOUR GAS
SUPPLIER
3
Things to know about your 40,000 BTU
Dayva Premier Outdoor Heater
Radiant Heat at 40,000 BTU’s:
The Dayva Premier Outdoor Heater generates “Radiant Heat.” Heated air
goes up and radiant heat is reflected down. This kind of heat is undisturbed
by wind. It’s, light, it moves in waves. People absorb this light; the warming
sensation on your skin is caused by light waves. The more intense the
BTU’s, the closer the light waves are, the more individuals will feel a
warming sensation. The ambient temperature around the heater is equal to
40,000 BTU’s after burning for five minutes. The Dayva Premiere Outdoor
Heater features an adjustable control valve, allowing for a desired heat
output. Whether a cozy dinner on the patio or those large gathering, you’ll
always have the right heat.
Burner Characteristics:
The Dayva Premier Outdoor Heater burns with a blue flame being 2”-3” and
a yellow/orange tip. The emitter will glow a hot red, radiating heat to the
hood and down with warmth for you.
Safety Tilt Feature:
Dayva Premiere Outdoor Heater come with a Safety Tilt feature that will
shut off the gas if the heater tilts over or is knocked down. This unique
safety feature is just another comfort for your peace of mind.
4
Care of L.P. (Propane) Gas Cylinders
(Not included)
WARNING:
L.P. GAS CANNOT AND SHOULD NOT BE USED ON UNITS
EQUIPPED FOR NATURAL GAS.
If your heater is designed for use with an L.P. cylinder (not included), the cylinder must meet the following
requirements:
• Cylinder weight is 20 lb. (9.07 kg); cylinder has outside diameter of 12-1/8 in. (30.8 cm), length of
18 in. (45.7 cm) and is constructed and marked to specifications of the U.S. Department of
Transportation (D.O.T.) or Canadian Transport Commission (C.T.C.). Cylinder has shut-off valve outlet
which is a No. 510, female P.O.L.; a safety relief device which has direct communication with vapor space
of cylinder. Supply system is arranged for vapor withdrawal. Cylinder includes a collar to protect valve.
When use with L.P. gas, special precautions should be observed when handling L.P. cylinders. Remember
that this is gas and under pressure, which MUST be handled with care. Ask your L.P. gas dealer to give
you a “short course” on necessary safety precautions and check local codes for use, storage and transport
regulations. Among the recommended practices are:
1. Always keep L.P. cylinders upright.
2. Do not subject L.P. cylinders to excessive heat.
3. Avoid damage to tank valves - handle them with care.
4. Never store L.P. cylinders indoors or in direct sunlight.
5. Do not handle L.P. cylinders roughly.
Follow instructions for connecting and disconnecting L.P. cylinders for the heater and be sure to leak check
all connections each time the cylinder is connected. Always use a solution of soap and water.
NEVER USE AN OPEN FLAME!
Always turn off the gas supply to the heater at the cylinder as soon as you are finished using the heater.
The L.P. cylinder must be equipped with the pressure regulator and hose assembly supplied with the
heater. The pressure regulator is set at the factory for maximum efficiency.
Visually inspect the entirelength of the hose for damage before use. This requires opening the door of the
L.P. cylinder enclosure. If damage or excessive wear is found, replace the regulator assembly immediately.
If needed, order only factory original parts. Do not attempt to substitute parts.
Always store L.P. Cylinders in a well ventilated space. If you intend to store the heater indoors, disconnect
the L.P. Cylinder and store it outside. Disconnected cylinders must have a threaded valve plug tightly
installed. When the L.P. Cylinder is not disconnected from the heater, the heater and cylinder must be
stored outdoors in a well ventilated space, out of the reach of children.
If you have not purchased an Auto-Stop Fill Tank, never allow your cylinder to be filled above the liquid
level stop fill gauge. The P.O.L. service valve and liquid level gauge are designed to be closed leak-tight by
hand. If wrenches are necessary to stop a leak, the valve probably needs repair or replacement.
Check all cylinder and line connections periodically to be sure they are tight. Make certain your cylinder is
properly fastened in place with the tank safety strap.
5
FOR YOUR SAFETY
READ BEFORE OPERATING
WARNING:
If you do not follow these instructions exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
A. This appliance operates with a Safety Pilot System. It is important that the pilot lights before the burner
can light.
B. BEFORE OPERATING, smell all around the appliance area for gas. Be sure to smell next to the floor
because some gas is heavier (PROPANE) than air and will settle on the floor. (NATURAL GAS WILL
RISE)
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in
or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may
result in a fire or explosion.
D. Do not use this appliance if any part has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas control
which has been under water.
E. Quick disconnects are not recommend because of possible gas leaking from connections.
CHOOSING A LOCATION
The heater may be installed on a combustible
floor surface. If the heater is installed near a
combustible wall or ceiling surface, the following
minimum clearances must be maintained:
18 in. from any ceiling surface, and 24 in. from
any wall on all sides.
Thisapplianceis CSACertified foroutdoorinstallation
only in a well ventilated space. The installation of this
appliance must conform with local codes or, in the
absence of local codes, with the National Fuel Gas
Code,ANSIZ223.1-Latest Edition. It must notbeused
inabuilding,garage,oranyenclosedareaorstructure.
The ground surface used for installation must be firm
and level, and allow adequate ventilation around the
unit (a minimum of 24 in. clear per side). At no time
should any part of the L.P. cylinder enclosure be
blocked off.
18" FROM ANY
CEILING SURFACE
24" FROM
ANYWALL
ON ALL SID
ES
6
WARNING
This product must be assembled and tested as shown in these
instructions. Any deviation or lack of testing could cause personal or
property damage. If you feel unable to assemble or test your heater as
described, have a qualified professional do it for you.
FOR TESTING INSTRUCTIONS SEE PAGE 11
DAYVA PREMIERE
OUTDOOR HEATER
MODEL
HS041-2
Tools Required
Phillips screwdriver, adjustable wrench / or pliers.
Step 1
Unpack the box and flatten it out on the ground where you will be working. This will
provide you with a clean and non-abrasive work surface.
7
DAYVA PREMIERE OUTDOOR HEATER
CONTENTS PACKED IN (2) BOXES
ASSEMBLY PARTS SUPPLIED
• (50) #10-32 x 1/2” Screws
• (50) Lock Washers
• (16) #10-32 Nuts
• Tank safety strap and buckle
• Igniter with hex nut
• Regulator
• Instructions
HOOD CAP
BOX 2
REFLECTOR HOOD BASE WITH WHEELS
EMITTER
SCREEN
TANK CABINET
ASSEMBLY
PARTS
KIT
Substitutions may be made
8
Step 2
Slip the connector hose through the two pieces of the heater post, as shown. The
connector will be factory assembled to the top heater post piece. Slide all three pieces
together and secure with the screws provide, as illustrated below. Make sure the holes
for the screws line up when sliding the pieces together.
DAYVA PREMIERE OUTDOOR HEATER
Step 3
Placethecabinet on the base so that the three threaded studs passthroughthemounting
holes in the cabinet. Once the cabinet is in position over the studs, place a 1/4” nut on
each stud and tighten securely with a wrench.
BOTTOM SCREW &
LOCK WASHER X 4 CONTROLS TO
P
GAS HOSE AND REGULATOR PROTRUDES FROMTHIS END
9
Step 4
Carefully lower the assembled heater post
onto the cabinet. Secure with four screws.
Step 5
While the cabinet door is open, locate the
tank strap mounting slots on the sides of
the cabinet. Install the tank safety strap
through these slots.
DAYVA PREMIERE OUTDOOR HEATER
10
ALIGN
MOUNTING
HOLES
SIDE
VIEW
FOR SCREWS
MOUNTING HOLE
DAYVA PREMIERE OUTDOOR HEATER
Step 6
Turn the hood upside down on your cardboard work surface. Place the emitter screen in
the center of the hood and align the mounting holes. From the outside, insert four screws.
Fromtheinside, install one lock washer and one hexnutoneachscrew. Tightensecurely.
Step 7
Turnthehood/emitterscreen assemblyover
and place it on the heater post. Make sure
all four of the mounting tabs are inside the
emitter screen. Line up holes in screen with
tabs.
Install four screws and tighten securely.
Other manuals for HS041-2
1
Table of contents
Popular Patio Heater manuals by other brands
EUROM
EUROM 334241 instruction manual
Lava Heat
Lava Heat Venetian owner's manual
EHS Ltd.
EHS Ltd. HQH-2000W instruction manual
VONROC
VONROC ALICUDI PH515AC Original instructions
OZONA
OZONA Heatflow IF010997 Safety instructions and operation manual
theBBQshop
theBBQshop 51611010 Safety, Installation, Operation and Maintenance