Dawson TRI-POD User manual
Installation Instructions
Rev.1 9/28/2022 1
1. Attach the mounting bracket to the mower using the (4) provided self drilling/tapping screws or
rivets at your desired location. Make sure to check behind the panel you are attaching to and avoid
any mechanical or electrical components.
2. Mount the main Tri-Pod light assembly to the mounting bracket using the provided 2 carriage bolts
(5/16-18 x .75in) and flange nuts. Level the light assembly and tighten the nuts/bolts so it does not
move.
Rev.1 9/28/2022
2
3. Using the provided zip ties, route the wiring to the battery of the mower and connect the red wire to
the positive (+) terminal and the black wire to the negative (-) terminal. Make sure the wires avoid
any moving parts that can pinch them and any engine parts that can get hot.
4. Install the steel side accessory mount plate to either side as shown. This can be used to add phone
mounts and other accessories.
Rev.1 9/28/2022
3
Dawson Manufacturing
Warranty
What this warranty covers:
This warranty covers defects in material and workmanship except as set forth below.
Who is covered:
The original purchaser from an authorized dealer.
For how long:
Complete Product: 1 year from the date of purchase.
Labor: 1 year from the date of purchase for the complete product.
Parts: 1 year from the date of purchase. (no Labor)
What Dawson Manufacturing will do:
Dawson Manufacturing will, at its sole option, repair or replace defective parts at no charge.
What you must do for warranty service:
To obtain warranty service, the purchaser must return the defective product to any authorized Dawson
Manufacturing dealer (preferably the one from whom the product was purchased) within the warranty
period. Purchaser must be able to verify the original purchase date. All transportation costs to and from
the dealer will be the responsibility of the purchaser.
What is not covered:
1. Products repaired or altered by anyone other than an authorized Dawson Manufacturing dealer.
2. Products which have been subject to misuse, negligence, accident, improper installation, maintenance,
care, or storage.
3. Dawson Manufacturing does not assume liability for damage to your equipment resulting from the
attachment or use of any Dawson Manufacturing. Equipment risk is the sole responsibility of the
purchaser.
Limits of Dawson Manufacturing Liability are:
Dawson Manufacturing’s liability is expressly limited to repair or replacement of defective parts. Dawson
Manufacturing shall not be liable for consequential, incidental, or contingent damages whatsoever, even if
damages are caused by the negligence or fault of Dawson Manufacturing. The foregoing warranties are
exclusive and in lieu of all other express and implied warranties including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Rev.1 9/28/2022
4
Table of contents
Other Dawson Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
