Datavan HiFive Series User manual
HiFive Series
Version 2.0
User Manual
2
About this Manual
Thank you for purchasing HiFive Series Touch Terminal. This terminal offers highly enhanced
features, with easy connection to various optional devices for optimal performance. This user
manual describes how to setup and connect your terminal.
Copyright
© Copyright 2019
All rights reserved. This product and related documentation are protected by copyright and
are distributed under licenses restricting their use, copying, and distribution. No part of this
documentation may be reproduced in any form by any means without prior written authorization of
the manufacturer and its licensors, if any.
Safety Information
Before you Proceed:
• Read the safety notices and the User Manual carefully before using the product.
• Keep the box and packaging in case the product needs to be shipped in the future.
• Follow the product and warning label instructions.
• Any changes or modications that do not follow the instructions in this manual will void this
product’s warranty.
Power Supply Safety Notes:
• To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
• Make sure the voltage of the power outlet conforms within voltage range of the terminal.
Failure to comply may cause the electric shock or damage to the terminal. If you are not
sure of the electricity voltage that you are using, consult your local electricity company.
• To avoid re or electric shocks, do not overload electric power outlets.
• Protect the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and the point where they exit from the apparatus.
Operating Instructions
• Keep this manual for future reference.
• Keep this equipment from moisture and dust.
• Place the equipment on a stable surface before setting it up.
3
About this Manual
Thank you for purchasing HiFive Series Touch Terminal. This terminal offers highly enhanced
features, with easy connection to various optional devices for optimal performance. This user
manual describes how to setup and connect your terminal.
Copyright
© Copyright 2019
All rights reserved. This product and related documentation are protected by copyright and
are distributed under licenses restricting their use, copying, and distribution. No part of this
documentation may be reproduced in any form by any means without prior written authorization of
the manufacturer and its licensors, if any.
Safety Information
Before you Proceed:
• Read the safety notices and the User Manual carefully before using the product.
• Keep the box and packaging in case the product needs to be shipped in the future.
• Follow the product and warning label instructions.
• Any changes or modications that do not follow the instructions in this manual will void this
product’s warranty.
Power Supply Safety Notes:
• To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
• Make sure the voltage of the power outlet conforms within voltage range of the terminal.
Failure to comply may cause the electric shock or damage to the terminal. If you are not
sure of the electricity voltage that you are using, consult your local electricity company.
• To avoid re or electric shocks, do not overload electric power outlets.
• Protect the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and the point where they exit from the apparatus.
Operating Instructions
• Keep this manual for future reference.
• Keep this equipment from moisture and dust.
• Place the equipment on a stable surface before setting it up.
• If there is any of the following situation arise, notify a qualied service technician
immediately:
◊The power cord or plug is damaged.
◊Liquid has been spilt on to the equipment.
◊The equipment has been dropped and damaged.
◊The equipment does not function normally.
• Do not block any ventilation openings to prevent the equipment from overheat.
• Do not leave the equipment in a non air-conditioned environment where the storage
temperature may go above 70°C (158°F), as this can cause damage to the equipment.
Maintenance
• Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.
• Do not apply pressure to the screen while cleaning.
• Do not spray any liquid directly onto the screen or the casing of the terminal.
• Chemical cleaners have been reported to cause damage on the screen of the terminal.
Warning and Attention
• The technical descriptions and specications of the equipment are subject to change without
notice.
• For safety reasons, wear gloves when assembling the product.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
Patent
Patent pending.
CE Statement
• A Class III equipment with an enclosure made of HB material and using a non-special
connector for the A.C./D.C. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
• If product with laser module, the class of laser should be mentioned. The warning as
attachment.
4
Federal Communications (FCC Statement)
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause
undesirable operation.
This equipment has been tested and found to comply within the limit of a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
switching the equipment on and off, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the interference receiving antenna.
• Increase the distance of separation between the equipment and interference receiver.
• Connect the equipment to a power outlet on a circuit different from that to which the
interference receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning
The use of shielded cables for connection of the monitor to the graphics card is required to assure
compliance with FCC regulations. Changes or modications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate this equipment.
5
CB/LVD Statement
• A Class III equipment with an enclosure made of HB material and using a non-special
connector for the A.C./D.C. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
• If product with laser module, the class of laser should be mentioned. The warning as
attachment.
CCC Statement
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干
扰采取切实可行的措施。
BSMI Statement
• 接螢幕與顯示卡所使用的防磁纜線必須確實遵守FCC規範。未獲廠商明確同意而擅自變更或修
改本裝置，可能導致使用者的使用權限失效，而無法繼續操作本設備。
• 警告使用者：這是甲類的資訊產品，在居住的環境中使用時，可能成射頻干擾，在這種情況使
用者會被要求採取某些適當的對策。
RoHS Statement
Directive for Restriction of Hazardous Substances in Electrical and Electronic Equipment.
WEEE Notice
The WEEE logo (shown at the left) on the product or on its box indicates that this product must
not be disposed of or dumped with your other household waste. You are liable to dispose of
all your electronic or electrical waste equipment by relocating over to the specied collection
point for recycling of such hazardous waste. Isolated collection and proper recovery of your
electronic and electrical waste equipment at the time of disposal will allow us to help conserving
natural resources. Moreover, proper recycling of the electronic and electrical waste equipment
will ensure safety of human health and environment. For more information about electronic and
electrical waste equipment disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you purchased the equipment, or
manufacturer of the equipment.
6
Contents
Chapter 1: Introduction............................................................ 8
Package Contents.................................................................................... 8
Overview of HiFive Series ....................................................................... 9
Front View ...................................................................................................9
Rear View..................................................................................................10
I/O Ports ....................................................................................................11
Physical Dimensions .................................................................................12
Specications......................................................................................... 26
Touch Terminal Specications ...................................................................26
Peripherals Specications .........................................................................27
Chapter 2: Preparing For the Installation............................. 29
System Default Settings........................................................................ 30
Main Board Jumper Setting and Connector Denition ...................... 31
U-615.........................................................................................................31
Voltage Output Denition ...................................................................... 33
U-615.........................................................................................................33
Setting the LCD Brightness .................................................................. 34
U-615 LVDS Panel ....................................................................................34
U-615 eDP Panel ......................................................................................35
Chapter 3: Hardware Installation .......................................... 36
Adjusting the System Stand (FLEX Type)............................................ 36
Adjusting the System Stand (NANO Type) .......................................... 37
Installing the Power Cord, Power Adapter, and Network Cable ........ 38
Installing the Customer Display (Optional) ......................................... 39
Installing the Secondary LCD Display (Optional) ............................... 41
Installing the Magnetic Stripe Reader (MSR) (Optional) .................... 42
Installing the VESA Mount (Optional) .................................................. 43
7
Chapter 4: Frequently Asked Questions (FAQ) ................... 44
Question 1: How do I clear CMOS?...................................................... 44
8
INTRODUCTION
INTRODUCTION
Chapter 1
Introduction
Congratulations on your purchase of this Touch Terminal. Your easy-to-use POS terminal is
designed to help you enhance your business exibility by offering superior customer experience.
Package Contents
Before setting up your Touch Terminal, check that the package contains the following items. If any
of the items is missing or damaged, contact your vendor immediately.
Touch Terminal (NANO stand) Touch Terminal (LITE stand) Touch Terminal (FLEX stand)
Quick
Installation Guide
Power Cord & Adapter Accessory Kit
Optional Accessories
Customer Display
(VFD)
Secondary LCD
Display
MSR Reader
INTRODUCTION
9
Overview of HiFive Series
The gures in this section illustrate the components (including input and output ports) located at
the front and rear of your Touch Terminal.
Front View
NANO Stand Type / Wall Mounting Type
H-610 H-614 H-615
LITE Stand Type
H-610 H-614
FLEX Stand Type
H-610 H-614 H-615
10
INTRODUCTION
INTRODUCTION
Rear View
NANO Stand Type
H-610 H-614
LITE Stand Type
H-610 H-614
FLEX Stand Type
H-610 H-614 H-615
Other manuals for HiFive Series
1
This manual suits for next models
3
Table of contents
Other Datavan Touch Terminal manuals
Datavan
Datavan HiFive Series User manual
Datavan
Datavan G-615S User manual
Datavan
Datavan ARC Series User manual
Datavan
Datavan S-615W User manual
Datavan
Datavan Neptune N-1945 User manual
Datavan
Datavan Wonder Series User manual
Datavan
Datavan Glamor Series User manual
Datavan
Datavan ARC Series User manual
Datavan
Datavan Saturn Series User manual
Datavan
Datavan G-615S User manual
