iboot-dc_v181024e iBoot-DC Page 9
5.3. Control and Status Page
Once the user is validated, the Control and
Status page is displayed. (Only one person
can be connected to the iBoot-DC at a time.).
This page provides automatic updates every
5 seconds.
To control the power, click on the appropriate
button. During power cycling, the Power
Status bar will indicate the temporary status,
with a blue background. Once the cycle is
complete, the status bar will revert to its
original condition. To abort a power cycle,
click on either Power On or Power Off
buttons.
If the AutoPing feature is in use, the page will
also display the current status, OK or Failed,
for each AutoPing in use, with a counter of
how many times action was triggered. If
connecting with the Admin credentials, reset
buttons for the Trigger counter is provided.
If the iBoot-DC is connected to a time server (see Section 6.3), The Home page will also show the five
most recent history events, including the Outlet, Action, User and Time/Date of each event. The iBoot-DC
holds the last 32 events in memory. The user can access a complete history webpage, download the
history in a .csv file, or clear the history.
Navigation Menu:
Refresh: Use the Refresh button to obtain the latest status of iBoot. Using your browser's refresh button
can lead to inadvertent power switching. If an NTP server is being used, the time of the last refresh will be
shown in the upper right corner.
Logout: When you are finished with iBoot, click on
Logout. A Goodbye page will be displayed. This
page has a URL link to re-connect with the iBoot.
The linkback URL is user settable. If no linkback is
set, the hyperlink will be the unit’s IP Address.
Setup: To access the Setup page, the administrator
credentials are required. When logged in as User, the challenge for Administrator credentials will be
displayed.
