Datalogic QuickScan Lite QW2100 User manual

Instructions

Hands Free Stand/Holder

QuickScanTM Lite QW2100

Installing the Stand/Holder

Screws

optional

Double-sided

foam tape optional

Grasp and

Rotate

Adjusting the Stand

Optional Wall

Mounted Holder

Scan Mode = Stand Mode

Scan Mode = Trigger Object Sense

Scan Mode = Trigger Single

Scan Mode = Trigger Hold Multiple

Scan Mode = Trigger Pulse Multiple

Scan Mode = Flashing

Scan Mode = Always On

Stand Mode

No trigger pull is required to read a bar code. Scanning is

turned on automatically when an item is placed in the

reader’s field of view. If the trigger is pulled, the reader

acts as if it in single read mode. Double Read Timeout

prevents undesired multiple reads of the same label

while in this mode.

$CSNRM05

$CSNRM06

Trigger Object Sense

This mode is similar to Stand Mode, except that a

trigger pull is required to activate the decoder.

Trigger Single

This mode is associated with typical handheld reader

operation: when the trigger is pulled, scanning starts

and the product scans until the trigger is released, or a

label is read, or the maximum Scanning Active Time has

elapsed.

$CSNRM00

$CSNRM01

Trigger Hold Multiple

When the trigger is pulled, scanning starts and the

product scans until the trigger is released or Scanning

Active Time has elapsed. Reading a label does not

disable scanning. Double Read Timeout prevents

undesired multiple reads of the same label while in

this mode.

Trigger Pulse Multiple

When the trigger is pulled, continuous scanning is acti-

vated until Scanning Active Time has elapsed or the trig-

ger has been released and pulled again. Double Read

Timeout prevents undesired multiple reads of the same

label while in this mode.

$CSNRM02

$CSNRM03Flashing

The reader flashes on and off regardless of the trigger

status. Flash rate is controlled by Flash On Time and

Flash Off Time. When Flash is ON the reader reads

continuously. When Flash is OFF scanning is deacti-

vated.

Always On

No trigger pull is required to read a bar code. Scanning is

continually on. Double Read Timeout prevents unde-

sired multiple reads while in this mode.

$CSNRM04

Other manuals for QuickScan Lite QW2100

Other Datalogic Barcode Reader manuals

Datalogic

Datalogic CBX800 User manual

Datalogic

Datalogic PowerScan 9100 Series Installation and operation manual

Datalogic

Datalogic QuickScan QBT21 Series User manual

Datalogic

Datalogic PowerScan Retail PM9501-RT User manual

Datalogic

Datalogic Gryphon GFS4 series User manual

Datalogic

Datalogic Gryphon I GM4100-BK User manual

Datalogic

Datalogic Gryphon I GBT4100 User manual

Datalogic

Datalogic Gryphon GM4400 User manual

Datalogic

Datalogic DS2x00N-DS4800 Series Guide

Datalogic

Datalogic PowerScan D8330 User manual

Datalogic

Datalogic MAGELLAN 3200VSI User manual

Datalogic

Datalogic Magellan 9300i User manual

Datalogic

Datalogic OM-GRYPHON User manual

Datalogic

Datalogic Magellan 2200VS User manual

Datalogic

Datalogic PowerScan PD7100 Corded Installation and operation manual

Datalogic

Datalogic Gryphon I GFE4500 Installation and operation manual

Datalogic

Datalogic PM9300 User manual

Datalogic

Datalogic MAGELLAN 1000I Installation and operation manual

Datalogic

Datalogic PowerScan D8330 User manual

Datalogic

Datalogic DS6300 User manual

Datalogic

Datalogic PowerScan PD8590-DPM User manual

Datalogic

Datalogic CBX500 User manual

Datalogic

Datalogic Gryphon I GD4100 User manual

Datalogic

Datalogic QuickScan QBT24XX User manual

Datalogic QuickScan Lite QW2100 User manual

Popular Barcode Reader manuals by other brands