DATAGRABBER Rapid RH L6 User manual
TABLE OF CONTENTS
Introduction
Installation
DataMaster L6 App: Getting Started
Connection
Conguration
Uploading/Storing Sensor Data
Removal
Battery
Troubleshooting
Product Specications
1
3
5
7
10
12
13
15
17
17
1
Your purchase of the DataGrabber® with Bluetooth® or the
DataGrabber® gives you the ability to automate the collection of
in-situ relative humidity (RH) test data. Because they integrate
with the Rapid RH® L6 system, the use of either DataGrabber
device can enhance your collection and documentation of Rapid
RH L6 data.
Your DataGrabber device automates the data collection process
by connecting with a Rapid RH L6 Smart Sensor and then
allowing a microchip built into the sensor to store time and date-
stamped RH and temperature readings on a periodic basis—for
days, weeks, or even months at a time while you are away from
the job site.
Both the DataGrabber with Bluetooth and the DataGrabber
perform the same automated data gathering tasks. ey dier
in how they communicate to your smartphone or other mobile
device. e DataGrabber with Bluetooth features a built-in
wireless connection to your smart device. e non-wireless
version of the DataGrabber requires the use of the Bluetooth-
enabled Rapid RH Total Reader®.
DATAGRABBER®
Data Logger with Bluetooth®
for Rapid RH® L6
Congratulations!
2WWW.RAPIDRH.COM
WAGNER METERS
DATAGRABBER®
Data Logger for Rapid RH® L6
Your DataGrabber device is designed to work in conjunction
with the DataMaster L6 app (available to download for free
in the App Store and on Google play). With this app, you can
congure time intervals for collecting RH test data, keep a
running clock of acclimation time, download the time and date-
stamped readings to your smart device, and generate and send
reports.
Your DataGrabber device can be used to collect and store up to
512 time and date-stamped RH and temperature readings on
an L6 sensor. e data you collect can help you gain a better
understanding of the drying process as well as the dynamics
that may be aecting the concrete drying time. You can also
analyze the data for any trends using the DataMaster L6 app.
3WWW.RAPIDRH.COM
DataGrabber with Bluetooth fully and correctly
inserted into L6 sensor.
e installation of your DataGrabber device is fast and easy.
Simply insert the device into the green sleeve of the L6 Smart
Sensor (previously installed in concrete.) Notice that your
DataGrabber has nine small protruding metal “connectors” at
the base. Be sure to orient the base downward when you insert
the DataGrabber into the L6 sleeve. is is required to obtain a
connection with the L6 Smart Sensor.
ese pictures show what the DataGrabber with Bluetooth and
the DataGrabber look like when installed correctly.
INSTALLATION
4WWW.RAPIDRH.COM
WAGNER METERS
DataGrabber fully and correctly inserted into
L6 sensor.
5WWW.RAPIDRH.COM
DATAMASTER L6 APP: GETTING STARTED
It is recommended that you set up an account at
www.F2170reports.com for use with the DataMaster L6
app. At this site, you can choose a username and password.
is also becomes the username and password that you
use for logging in to the DataMaster L6 app.
Next, download the free DataMaster L6 app to your smart
device. is app is available online in both iOS and Android
versions at the Apple App Store and Google Play.
6WWW.RAPIDRH.COM
WAGNER METERS
Before using the DataMaster L6 app, make sure you have
Bluetooth enabled on your mobile device. When you open the
app for the rst time, a pop-up window will open giving you the
option to watch a video tutorial. It’s highly encouraged to watch
this tutorial to ensure proper usage, but if not, you can also
choose to skip the tutorial, which takes you to the Total Reader
Quick Reading screen shown below:
e DataMaster L6 app gives you many options for viewing,
saving, and attaching your data to reports. More information
about using the app is available at https://www.wagnermeters.
com/support/wagner-pdf-downloads/.
7
WWW.RAPIDRH.COM
WAGNER METERS
Aer installing your DataGrabber device and downloading the
DataMaster app, your next step is to connect the DataGrabber
with your mobile device so that you can congure it for the
automated collection of time and date-stamped data.
As described already, for the DataGrabber with Bluetooth, a
wireless connection is obtained when it is within Bluetooth
range of your mobile device. For the DataGrabber (without
Bluetooth), use the Rapid RH Total Reader with the DataGrabber
to connect wirelessly to your mobile device.
CONNECTION
Next, with the DataMaster L6 app open on your mobile device,
click on the Menu icon (three horizontal bars) located in the
upper right-hand corner of the screen. en choose Manage
Devices to go to the Devices screen.
Connection of the Total Reader with the
DataGrabber to Get a Reading
8WWW.RAPIDRH.COM
WAGNER METERS
DataGrabber with Bluetooth
A pop-up window will appear on the RH Reading screen if
detecting an installed DataGrabber with Bluetooth device
for the rst time. In addition, if you are in proximity of any
DataGrabber with Bluetooth units installed in L6 sensors, on
the Devices screen the unit with the greatest signal strength will
appear as the rst unit at the top, followed by other DataGrabber
units within Bluetooth range. You can begin to congure your
DataGrabber units (see the Conguration section).
DataGrabber (without Bluetooth)
Use the Total Reader with the DataGrabber to connect to the
DataMaster L6 app on your mobile device. A pop-up window
will appear on the RH Reading screen if detecting an installed
DataGrabber device for the rst time. IMPORTANT: You must
connect the Total Reader with the DataGrabber TWICE for it to
start working. e rst time initializes the DataGrabber device,
and the second time veries that the device is taking readings. If
you transfer the DataGrabber to a new L6 Smart Sensor, you will
need to repeat this process.
Whenever the Total Reader is properly connected to the
DataGrabber, it will appear on the app’s Devices screen, as
named, along with any DataGrabber with Bluetooth devices.
You can now select your DataGrabber device and congure its
settings as needed.
NOTE: On the Devices screen, you can easily identify the type
of device that is connected to your L6 sensor by the icon to the
le of the Device name:
DataGrabber with Bluetooth
DataGrabber
Total Reader
D
TR
DB
Table of contents
Other DATAGRABBER Data Logger manuals
