Datacom Systems DURAstream DS-4000 Guide

July 2014

541-0152-R.01

DURAstream™1 Gigabit DS-4000

FASTStart Guide

DS-4000 FASTstart Guide

What is included?

(1) Model:DS-4000 series Bypass Switch

(1) Console Cable (DB9 to RJ45)

(1) Management Cable (RJ45 to RJ45)

(2) Switching AC Adapters

(2) AC Line Cords

Summary:

Datacom Systems Inc. DURAstream™DS-4000 Bypass Switch is a 1Gbps

intelligent external active bypass that enables plug and play connectivity which

includes an auto heartbeat and requires no additional drivers to be installed on

any connected appliance.

The DS-4000 consists of four 1Gbps segments which can support four network

segments and four appliances. In our example below, we show two network

segments being connected with two systems (typically IPS) using a DS-4000.

If one of the links connected to an appliance segment goes down, the DS-4000

will directly connect the network ports on the segment and bypass the appliance.

This will ensure that the network segment will remain connected even if the

appliance on the segment goes down.

DS-4000 FASTstart Guide

Port Layout:

Ports are designated as Network or Appliance Ports as shown below:

Network and Appliance Ports

Default Settings:

SSH

Port: 22

Serial Terminal Settings

Bits per second: 115200

Data bits: 8

Parity: None

Stop: 1

Flow Control: None

Management Port Settings

IP Address: 192.168.0.111

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1

User Settings

Username: admin

Password: admin

DS-4000 FASTstart Guide

CLI Installation Commands:

Changing Management Port Settings

1. Show the current management port settings

datacom>show management-if

2. Enter configuration mode for management interface.

datacom>configure management-if

3. To configure static IP settings:

datacom(configure-management-if)>ip static <ip address> mask <network mask>

gateway <gateway IP address>

Example:

datacom(configure-management-if)>ip static 10.10.10.10 mask

255.255.255.0 gateway 10.10.10.1

4. To assign the IP settings dynamically:

datacom(configure-management-if)>ip dhcp

Changing Network/Appliance Port Settings:

1. Show the current port settings:

datacom>show links configuration

2. Enter configuration mode for a network or appliance Port:

datacom>configure port portid S3.N2

portid S3.N2

S3 indicates segment 3.

N2 indicates network port 2.

A1 would indicate appliance

port 1.

DS-4000 FASTstart Guide

3. To change the port status between up and down:

datacom ports portid S3.N2>link <auto/down>

4. To modify the speed/duplex on the port:

datacom ports portid S3.N2>speed <auto/10M/100M/1G> <auto/full/half>

Example:

datacom ports portid S3.N2>speed 100M full

Changing Segment Settings:

1. Show the current bypass settings:

datacom>show bypass mode

datacom>show bypass status

datacom>show bypass heartbeat

2. Enter configuration mode for a segment:

datacom>configure segment 1

3. Enable/Disable link fault detection:

datacom(segment[1])>lfd <enabled/disabled>

4. Set segment boot-mode:

datacom(segment[1])> boot-mode heartbeat <normal-active-bypass/normal-active-

inline/manual-active-inline/manual-active-bypass-plus/manual-active-bypass/manual-

passive-bypass/auto>

Example:

datacom ports portid S3.N2>bypass boot-mode heartbeat normal-active-bypass

DS-4000 FASTstart Guide

GUI Tutorial:

By clicking on the “Management Port” tab on the left side of the page, you can view

the management port fields. Clicking on the blue “Management Port” title at the top will

enter configuration mode.

Page to view Management port settings

Page to edit Management port settings

DS-4000 FASTstart Guide

Clicking on the “Ports” section on the left side of the page and then selecting the

“Links” tab will bring up a page that shows the settings for all network and appliance ports

on the DS-4000. To configure the link settings, click on the blue “Links” title at the top of

the page.

Showing statistics for all Network/Appliance ports.

Edit the attributes of Network/Appliance ports.

DS-4000 FASTstart Guide

Clicking on the “Segments” tab at the top left of the page will present information on

all of the configurable attributes of segments. To configure a specific segment, click on

one of the blue “Segment #” titles at the top of the screen.

Showing all of the configurable attributes for segments.

Configure the various attributes of a segment.

DS-4000 FASTstart Guide

Clicking on the “Authentication” tab on the left side of the page and then selecting

“Users” show the admin user. To configure password for admin, click on one of the blue

“admin” title at the top of the screen.

Showing the admin account.

Modifying the password for the admin account.

Table of contents

Other Datacom Systems Switch manuals

Datacom Systems

Datacom Systems VS-1212-F Instructions for use

Datacom Systems

Datacom Systems DS-1404 Guide

Datacom Systems

Datacom Systems DURAstream DS-1010 User manual

Datacom Systems

Datacom Systems 4X16SP-1000BT User manual

Datacom Systems

Datacom Systems VS-1200-S Series User manual

Datacom Systems

Datacom Systems VS-1200 Series User manual

Datacom Systems

Datacom Systems 4X16SP-1000BT User manual

Datacom Systems

Datacom Systems 2X8SP-1000BT User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual