Data Video DAC-100 User manual
Digital Video Converter
D
D
DA
A
AC
C
C-
-
-1
1
10
0
00
0
0
Installation Guide
http://www.datavideo-tek.com
DAC-100
3
RCA VIDEO & AUDIO CABLE
S-VIDEO CABLE
1AC ADAPTER
AC ADAPTER
S-VIDEO CABLE
(REQUIRES RED & WHITE RCA
AUDIO CABLE)
RCA VIDEO & AUDIO CABLE
FIREWIRE
(6 PIN MALE TO 6 PIN MALE)
DAC-100
What’s in the Box?
GETTING STARTED
INSTALLATION GUIDE
MANUAL
REGISTRATION CARD
SUPPORT INFO
2
4
FIREWIRE CABLE
6 PIN MALE TO 6 PIN MALE
1
Audio Bit Rate Selector
Input Selector
Source Indicator
Audio
Bit Rate Indicator
S-Video
Input
Composite Video Input
Left Audio Input
Right Audio Input
S-Video Output
Composite Video Output
Left Audio Output
Right Audio Output
INPUT SIDE
OUTPUT SIDE
Dip Switches
(Behind the Plastic Cover)
AC Adapter Connector
Power Switch
MEET THE DAC-100
FireWire
Input/Output
FireWire
Input/Output
2
FRONT (Input)
CAPTURING
3
How to connect DAC-100 to capture Video from a VCR or Camcorder
1. Connect the RCA Video/audio cables from the VCR’s Line output to the input on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect opposite end to the PC or Mac’s FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100’s Source Button to switch it to “AV” and the A Encode Button to “16 bit”.
6. Go to the “Capture or Import” mode on the Editing software to begin capturing video to a PC or a MAC
FireWire to
PC/MAC
FireWire
PRESS
Set to “16 bit”
Set to “AV”
PRESS
SOURCE
A ENCODE
DAC-100 Input Side
CAPTURING
4
1. Connect the S-Video cable and RCA audio cables from the VCR’s Line output to the input on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100’s Source Button to switch it to “AV” and the A Encode Button to “16 bit”.
6. Go to the “Capture or Import” mode on the Editing software to begin capturing video to a PC or a MAC.
FireWire
S-Video
PRESS
Set to “16 bit”
Set to “AV”
PRESS
FireWire to
PC/MAC
SOURCE
A ENCODE
How to capture Video from a VCR or Camcorder
DAC-100 Input Side
EXPORTING TO
Set to “AV”
PUSH
PUSH
Set to “16 bit”
5
1. Connect the RCA Video/audio cables from the VCR’s Line input to the output on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100’s Source Button to switch it to “DV” and the A Encode Button to “16 bit”.
6. Go to the “Export” mode on the Editing software to begin exporting video to the VCR.
FireWire
FireWire to
PC/MAC
SOURCE
A ENCODE
How to Export Video from the computer to Tape
DAC-100 Output Side
EXPORTING TO ( )
6
1. Connect the S-Video and RCA audio cables from the VCR’s Line input to the output on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100’s Source Button to switch it to “DV” and the A Encode Button to “16 bit”.
6. Go to the “Export” mode on the Editing software to begin exporting video to the VCR.
FireWire
REAR VIEW
Set to “16 bit”
Set to “AV”
PUSH
PUSH
Set to “16 bit”
FireWire to
PC/MAC
SOURCE
A ENCODE
How to Export Video from the computer back to Tape
DAC-100 Output Side
1
The Important Notice of Safety Instruction
and Radio & TV Interference
1. Read all of these instructions and save them for later reference.
2. Follow all warnings and instructions marked on the products.
3. Unplug this product from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand or table. The
product may fall, causing serious damage to the product.
6. Slots and openings on the cabinet and the back or bottom are
provided for ventilation. To ensure reliable operation of the product
and to protect it from overheating, do not block or cover these
openings. The openings should never be blocked by placing the
products on a bed, sofa, rug or other similar surface. This product
should never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should be operated from the type of power source
indicated on the marking label of the AC adapter. If you are not sure
of the type of power available, consult your dealer or local Power
Company.
8. Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be walked on.
9. If an extension cord is used with this product, make sure that the total
of the ampere ratings on the products plugged into the extension cord
to not exceed the extension cord ampere rating. Also, make sure that
the total of all products plugged into the wall outlet does not exceed
15 amperes.
2
10. Never push objects of any kind into this product through cabinet slots
as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.
11. Except as explained elsewhere in this guide, don’t attempt to service
this product yourself. Opening and removing those covers that are
marked “Do Not Remove” may expose you to dangerous voltage
points or other risks. Refer all servicing on those compartments to
service personnel.
12. Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper
adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
product to normal operation.
E. If the product has been dropped or the cabinet has been
damaged.
F. If the product exhibits a distinct change in performance,
indicating a need for service.
3
Service and Support
It is our goal to make your products ownership a satisfying experience. Our
supporting staff is available to assist you in setting up and operating your
system. Please refer to our web site www.datavideo-tek.com for answers
to common questions, support requests or contact your local office below.
Datavideo Corporation (USA)
12300-U East Washington Blvd., Whittier, CA 90606 USA
Tel: +1 562 696 2324 www.datavideo.us
Datavideo Technologies Europe BV
Californiedreef 263565 BL Utrecht, The Netherlands
Tel: +31 30 261 9656 www.datavideo.info
Datavideo UK Limited
Unit 2 Waterside Business Park, Hadfield, Glossop, Derbyshire SK131BE UK
Tel: +44 1457 851000 www.datavideo.info
Datavideo Technologies Co., Ltd.
10F, 176 Jian-Yi Rd, Chung Ho City, Taipei Hsien, Taiwan 235
Tel: +886 2 8227 2888 www.datavideo.com.tw
Datavideo Technologies China Co.
2F-D, 2 Lane 777, West Guangzhong Rd, Zhabei District, Shanghai, China
Tel: +86 21 5603 6599 www.datavideo.cn
Datavideo Technologies (S) PTE Ltd.
100 Lor 23, Geylang Rd, #01-03 D’Centennial, Singapore 388398
Tel: +65 6749 6866 www.datavideo.sg
Other manuals for DAC-100
3
Table of contents
Other Data Video Media Converter manuals
Data Video
Data Video DAC-100 User manual
Data Video
Data Video DAC-7 User manual
Data Video
Data Video STC-100 User manual
Data Video
Data Video DAC-200 User manual
Data Video
Data Video Tally Box TB-20 User manual
Data Video
Data Video NVD-30 User manual
Data Video
Data Video NVD-25 User manual
Data Video
Data Video DAC-60 User manual
Data Video
Data Video NVD-35 MARK II User manual
Data Video
Data Video DAC-8P 4K User manual
Data Video
Data Video NVS-40D User manual
Data Video
Data Video DAC-50 User manual
Data Video
Data Video DVK-400 User manual
Data Video
Data Video DAC-60 User manual
Data Video
Data Video DDC-2512 User manual
Data Video
Data Video KMU-100 User manual
Data Video
Data Video DAC-9P User manual
Data Video
Data Video NVD-35 User manual
Data Video
Data Video DAC-7L User manual
Data Video
Data Video DAC-200 Quick start guide
