Dassault AT ARTEMA Operating and maintenance instructions

Oct 28, 2000 NT 332 588 Rev 1.6

AUTOMATISMES & TELECOMMUNICATIONS

ARTEMA

Portable & Mobile

Installation guide

DASSAULT AT

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 1

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

Table of contents

1 Artema presentation.........................................................................................2

2 Installation and connections.............................................................................3

2.1 Warning .......................................................................................................3

2.2 Lithium batteries...........................................................................................3

2.3 Environment.................................................................................................3

2.4 Battery pack installation................................................................................4

2.5 Optional battery pack installation in base unit (portable version only).............4

2.6 Installing the paper roll..................................................................................5

2.7 Connecting to the mains supply....................................................................6

2.8 Connecting to the phone networks (portable version only).............................6

2.9 Radio link setup (portable version only).........................................................7

2.10 Connecting peripherals (portable version only)...........................................7

2.11 Charging ARTEMA....................................................................................7

3 Trouble shooting & spare sparts.......................................................................8

4 Technical specifications ...................................................................................9

4.1 Handset specifications..................................................................................9

4.2 Base unit specifications (portable version only) .............................................9

4.3 Power supply base specifications..................................................................9

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 2

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

1 ARTEMA PRESENTATION

Smart card reader*

"Power on"

key

Pin Pad*

To phone line**

* depending on configuration

** ARTEMA portable only

Paper cover

Magnetic

stripe card

reader

Printer

Paper output

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 3

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

2 INSTALLATION AND CONNECTIONS

2.1 Warning

Artema is an electrical device. It must be used in normal conditions as described in this

manual.

DASSAULT A.T. cannot be held responsiblefor :

- Damages due to using or servicing Artema other than in the conditions

described in this guide.

- Damages or Failures due to external causes.

2.2 Lithium batteries

In addition to the battery pack of the handset, Artema uses Lithium batteries in order to

backup internal data. The Lithium batteries in normal usage conditions have 6 years life

expectancy. These batteries should only be replaced by an approved servicing center.

CAUTION

Danger of explosion if battery is incorrectly replaced

Replace only with the same or equivalent type

recommended by the manufacturer.

Dispose of used batteries according

to the manufacturer’s instructions.

2.3 Environment

In order to use Artema in optimal conditions

-Place the base on a clear, flat, leveled surface, close to the mains.

-A phone plug is required for Artema portable.

-Place the terminal away from excessive heat sources, vibrations, dust, water and

strong radio sources.

Environmental conditions

Minimum Maximum

Operating temperature +5 °C +40°C

Storage temperature -25 °C +55 °C

Relative humidity 50% 90%

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 4

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

2.4 Battery pack installation

-It is important to switch off the terminal before changing thebatterypack.

-Position the battery pack in the back of the handset.

-Press on the upper part of the battery until a "click" noise is heard.

-The terminal is ready for the charging cycle (see installation and connection).

2.5 Optional battery pack installation in base unit (portable version only)

If you have a second battery pack you can charge it in the base unit ref.P4432-150

(radio base for "portable" version).

- Extract the cache, and replace it by the battery pack.

- Press on the battery until you hear a "click".

- The battery will start the charging cycle.

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 5

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

2.6 Installing the paper roll

To obtain the highest printing quality, and to ensure maximum printer life span, only use

recommended paper rolls 2 1/4 x 7/8 x 80 Ft.

- Open the printer casing by pressing simultaneously on both sides, and by pulling

upwards.

- Place the roll of paper in the casing, paper output towards the pin pad. Leave a few

inches of paper outside.

- Close the printer casing. You will hear a "click" sound to confirm the casing is

closed.

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 6

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

- The printer will work only if the casing is closed and battery is charged.

- Switch on the terminal, by pressing the "power on" key, and draw an inch of paper to

check the roll is correctly placed in its casing.

- Cut the exceeding paper.

2.7 Connecting to the mains supply

- Connect the power supply line to the mains supply (115V), and check that the green

indicator on the base in on.

The mains outlet needs to be close to the terminal, within reach, in order to

quickly disconnect the terminal if necessary.

2.8 Connecting to the phone networks (portable version only)

- Connect to T1 the phone line at the rear of the base unit

Base unit connections :

Phone handset

Phone line

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 7

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

2.9 Radio link setup (portable version only)

- The radio link setup is set by a subscription procedure between the handheld unit

and the base (see radio linking document).

- This procedure is required for the handset to work with thebase.

2.10 Connecting peripherals (portable version only)

Connectors RS232.1 and RS 232.2 allow you to connect :

- Cash registering machine

- Other RS232 peripherals such as external Pin pads, Check readers

2.11 Charging ARTEMA

Before using Artema for the first time, leave the handset to charge for 8 hours in

order to fully charge the battery pack. This should allow you to use Artema in

good conditions.

- After a charging cycle, an icon indicates the battery charge level

- In order for you to keep getting a large number of transactions without base

- We recommend you to change battery packs every two years.

- Only use original battery packs

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 8

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

3 TROUBLE SHOOTING & SPARE SPARTS

Technical maintenance operations should only be done by approved servicing

centers

… however some problems can easily be solved :

Artema stops during display or printing :

- Recharge the battery by placing the handset on the base for several hours

- Check the battery is correctly set in the handset

- Check the printer casing is correctly closed

The handset is not communicating with the base (portable version only) :

- Check the base is on (green indicator on)

- If the green indicator is off, check the power line is correctly plugged.

- Check the radio link between the base and the handset.

Phone calls to processing centers fail (portable version only) :

- Check that the phone line is correctly connected

- Check that your phone installation works

- Check that the telecommunication parameters match your phone installation.

Paper jams :

- Check that the paper roll is correctly placed.

- Check that the paper casing is correctly closed.

Spare parts

Contact DASSAULT A.T. of America at 888 / 710-0100.

NT 332 588 Rev.1.6 ARTEMA Portable & Mobile 9

Installation guide

THIS INFORMATION IS PROPRIETARY INFORMATION OF DASSAULTA. T.

AND MAYNOT BE USED,COPIED,DISCLOSED ORDIVULGED, IN WHOLE

OR IN PART,FOR ANYPURPOSE BYANY PERSON WITHOUT THE WRITTEN

APPROVAL OF DASSAULTA.T.

DASSAULT A.T.

4 TECHNICAL SPECIFICATIONS

4.1 Handset specifications

Weight

Size 680 g (23.9 OZ)

243 x 90 x 65 mm (8.57 x 3.2 x 2.3 inch)

Printer Thermal printer

Display Liquid Crystal Graphical, Backlit 40 x 132

Pin pad 11 alpha numeric keys, 3 navigation keys,

3 dedicated keys: CLR, CAN, ENT

Card readers Magnetic stripe card reader

ISO2 and ISO3 or ISO2 and ISO1

Optional smart card reader 8 or 16 contacts

ISO 7816 smart card readers : 2 or 4

optional SAM modules

Central Processing Unit 32 bits RISC processor, 256 KB RAM

1 MB Flash memory

Power supply Removable battery pack

Charging time:

2 hours for 60% of capacity

8 hours for a full charge

Autonomy Over 80 transactions

4.2 Base unit specifications (portable version only)

Size

Weight 235 x 138 x 74 mm (9.25 x 5.4 x 2.9 inch)

815 g (28.7 OZ),

Power supply 115 V AC mains cord

Phone connection 2 phone line interfaces

Peripheral connections 2 RS232 interfaces

Optional 2nd battery pack charger YES

4.3 Power supply base specifications

Size

Weight 235 x 138 x 74 mm (9.25 x 5.4 x 2.9 inch)

680 g (23.9 OZ)

Power supply 115 V AC mains cord

Phone connection none

Peripheral connections none

Optional 2nd battery pack charger none

Table of contents

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual