Dantherm HXV 5 User manual

039913 •Version 1.0 • 07.04.2014

High End User Panel

HXV 5

Service manual

Rev. 2.0

Der tages forbehold for trykfejl og ændringer

Dantherm can accept no responsibility for possible errors and changes

Irrtümer und Änderungen vorbehalten

Dantherm n’assume aucune responsabilité pour erreurs et modifications éventuelles

039913 •Version 1.0 • 07.04.2014

Introduction

Overview

Introduction

This is the installation and users instruction for the Dantherm Air Handling High End

User’s Panel for the HXV 5 unit.

The table of content below gives you an overview of the subjects.

Copying of this service manual, or part of it, is forbidden without prior written permis-

sion from Dantherm Air Handling.

Reservations

Dantherm Air Handling reserves the right to make changes and improvements to the

product and the service manual at any time without prior notice or obligation.

Table of contents

This instruction covers the following topics:

Topic

See page

Description of the display and the keys

Get ready for use

User’s guide

Fault finding guide

Menu structure and factory settings

Description of the display and the keys

Introduction

The High End User’s Panel can control the HXV 5 unit.

Up to 5 High End User’s Panels can be connected at the same time.

Information about operation can be read on the display.

The basic panel for HXV 5 cannot be used when the High End User’s Panel is installed.

Illustration

This illustrates the High End User’s

Panel:

Part/function

The following describes the user’s panel:

Part

Function

Air Quality

Illuminates when the air quality sensor is activated

Humidity

Illuminates when the humidity sensor is activated

Heater

Illuminates when the heater is activated

Power on

Illuminates when power to the HXV 5 is on

Display

Shows the menu etc.

Arrow

Moves up one menu item

Arrow

Moves down one menu item

Enter

Acceptance of changes

Key lock/-

Escape

To protect against unintended settings

To escape the menu and return to the main screen

Display

When the panel has not been activated for 1 minute, the display shows the actual fan

speed (1-4) and the fan symbol.

039913 •Version 1.0 • 07.04.2014

Get ready for use

Introduction

This section will guide you through the mounting and installation of the High End User

Panel.

Mounting and in-

stallation

Follow this procedure to mount and install the unit:

Step

1st High end user panel

Additional High end user panel

Disconnect the basic user panel if one

is connected to the HXV 5

Connect the 12 meter cable from the

High End User Panel to the last serial

connected user panel

Connect the 12 meter cable from the

High End User Panel to the cable from

the HXV 5 that was previously con-

nected to the basic user panel

User’s guide

Introduction

This topic will guide through customization of different settings.

Displays

Displays shown in this manual is often examples and may differ from one display to an-

other.

More than one high

end user panel, ad-

dress

By use of more than one high end user panel, the following should be done:

When the panel is installed it requests for its address. If the address of one of the pan-

els needs to be changed later on, follow this procedure:

Step

Action

Key

Result

Press at the same time Arrow

Down and Enter for 3 seconds

Press Arrow Up/Down to address

the user panel (1-6)

Press Enter to save the new set-

ting

Lock/unlock keys

The keys can be locked or unlocked. Follow this procedure to lock/unlock:

Step

Action

Key

Result

Press the Key Lock to lock or un-

lock the keys

Locked keys:

Unlocked keys:

Fan speed

The fan speed is easily changed form the main screen on the display:

Step

Action

Key

Result

Press Arrow Up/Down to change

the fan speed when in the main

screen

Continued overleaf

Addr= 5

039913 •Version 1.0 • 07.04.2014

User’s guide, continued

Read settings

Follow this procedure to read settings:

Step

Action

Key

Result

Press Enter to reach the menu

Press arrow down to read the

different settings/values

A complete menu structure is

available in section “Menu struc-

ture and factory settings”, page

Press Key Lock twice to escape

the menu

Change of settings

Follow this procedure to change settings:

Step

Action

Key

Result

Press Enter

Press arrow down to reach the

setting to be changed

Press Enter to select the setting

to be changed

Change value with Ar-

row Up/Down

Confirm with Enter

(You can here change the fan

speed with Arrow Up/Down)

Repeat step 1-5 to change more

settings

Fan speed

Settings made on one High End User’s Panel will override settings of other panels.

Air inlet temperature

Settings made on one High End User’s Panel will override settings of other panels.

Continued overleaf

2= 70%

2= 60%

1= 40%

2= 60%

1= 40%

User’s guide, continued

Humidity

Settings made on one High End User’s Panel will NOT override settings of other panels.

Humidity settings are individually.

Setting on 100 % disables the actual humidity sensor!

Air quality

Settings made on one High End User’s Panel will NOT override settings of other panels.

Air quality settings are individually.

Setting on 100 disables the actual air quality sensor!

Fire place

The fireplace function is a help when e.g. the wood burning stove, fireplace or the like is

to be lit.

The function disables the exhaust air fan for 15 minutes by which the inlet fan estab-

lishes an over pressure in the house, which is good for the vent in the chimney.

Reset filter timer

See the service manual for HXV 5.

039913 •Version 1.0 • 07.04.2014

Fault finding guide

Fault finding

Use this table to find the solution of a problem:

Problem

Cause

Solution

Display shows FIRE

AQ sensor has detected a

value on or below 5

Stop the HXV 5

Reset HXV 5 by discon-

necting it for a few sec-

onds

Buzzer sounds

Filter timer is below val-

ue 1000

Replace/clean the filter

and reset the timer by

pressing Enter for

3 seconds

Smoke is coming out from

the wood burning stove

Low pressure in the house

Activate the fireplace

function.

The function disables

the exhaust air fan for

15 minutes by which

the inlet fan establishes

an over pressure in the

house, which is good

for the vent in the

chimney.

The unit is supposed to run

fan speed 4 but it automat-

ically switches to fan speed

3 after a while

The unit automatically

switches from fan speed 4

to 3 after one hour

Set fan speed 4 again

after one hour if need-

The fan speed sometimes

changes to fan speed 3

even though it was set at

fan speed 1 or 2

A humidity sensor or AQ

sensor has detected a value

which is higher than its set

point

The fan speed returns

to its previous setting

(1 or 2) when the hu-

midity level or the air

quality is okay again

The panel is locked

The Key Lock key has been

activated

Press the Key Lock key

to unlock the panel

Menu structure and factory settings

Menu structure

The following table shows the complete menu structure in the panel. The factory set-

tings (if any) of each menu item and the range is also available from the table:

Display

Factory setting

Range

Fan speed 1

40 %

35 –55 %

Fan speed 2

60 %

60 –90 %

Fan speed 3

95 %

Fan speed 4

100 %

T1 - Outdoor air

temperature

T2 - Supply air

temperature

18 °C

+10 –+30 °C

T3 - Warm and

humid air from

the house

T4 –Exhaust air

temperature

4 °C

0 –+10 °C

%RH –Humidity

80 %

20 –100 %

AQ –Air quality

0 –100

FP –Fireplace**)

Filter timer

Operation time

*) Cannot be changed

**) When pressing Enter, the FirePlace function is activated and the Fire symbol is shown

for 15 minutes

TIMER

TIMER

3918

FP OFF

AQ= 61

AQs= 25

RH= 51%

RHs= 75%

T4= 22°

T4s= 4°

T3= 21°

T2= 22°

T2s= 18°

T1= 21°

4= 100%

3= 85%

2= 60%

1= 40%

Table of contents

Other Dantherm Ventilation Hood manuals

Dantherm

Dantherm Vent R2 User manual

Dantherm

Dantherm HCV 300 User manual

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual