Danfoss 176F3167 User guide
1 Overview
1.1 Description
Top fan kits are used with iC7 Series FA09–FA12 Frequency Converters and VLT FC®Series D3h–D4h and E3h–E4h Drives.
The top fan assembly in FA09–FA10 and D3h–D4h frames requires 1 fan. The top fan assembly in FA11–FA12 and E3h–E4h frames
requires 2 fans. Top fans are secured under a grill or within a single or double fan housing.
Top fan replacement kits contain all parts required to replace 1 fan.
1.2 Kit Numbers
Use these instructions with the following kits.
Table 1: Top Fan Kits for iC7 Series FA09-FA12 Frequency Converters
Kit number
Description
Frame designation
176F3167
Top fan IP20 DC 80x38 mm
FA09–FA10
176F6636
Top fan IP20 DC 120x38 mm 48 V DC
FA11–FA12
Table 2: Top Fan Kits for VLT®FC Series D3h–D4h and E3h–E4h Drives
Kit number
Description
176F3166
Top fan IP20 DC 80x25 mm
176F3167
Top fan IP20 DC 80x38 mm
1.3 Items Supplied
The following parts are contained in the kit.
Table 3: Items Supplied in Top Fan Kits
Item
Quantity
Fan
1
Installation instructions
1
AN389655468601en-000101 / 130R0767 | 1Danfoss A/S © 2022.03
Application Guide
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
iC7 Series Frequency Converters and VLT® FC Series Drives
-
-
-
-
-
-
-
-
-
-
-
-
-
2 Installation
2.1 Safety Information
NOTICE
QUALIFIED PERSONNEL
Only qualified, Danfoss authorized personnel are allowed to install the parts described in these installation instructions.
Disassembly and reassembly of the frequency converter must be done in accordance with the service guide.
Use the standard fastener torque values from the service guide, unless the torque value is specified in these instructions.
WARNING
ELECTRICAL SHOCK HAZARD
Danfoss frequency converters contain dangerous voltages when connected to mains voltage. Improper installation, and instal-
ling or servicing with power connected, can cause death, serious injury, or equipment failure.
Only use qualified electricians for the installation.
Disconnect the frequency converter from all power sources before installation or service.
Treat the frequency converter as live whenever the mains voltage is connected.
Follow the guidelines in these instructions and local electrical safety codes.
WARNING
DISCHARGE TIME
The frequency converter contains DC-link capacitors, which can remain charged even when the frequency converter is not pow-
ered. High voltage can be present even when the warning LED indicator lights are off. Failure to wait the specified time after
power has been removed before performing service or repair work can result in death or serious injury.
Stop the motor.
Disconnect AC mains and remote DC-link power supplies, including battery back-ups, UPS, and DC-link connections to other
frequency converters.
Disconnect or lock the motor.
Disconnect any brake option.
Disconnect any regen/load share option.
Wait for the capacitors to discharge fully. The minimum waiting time is listed on the frequency converter label and also in the
following discharge time table.
Before performing any service or repair work, use an appropriate voltage measuring device to make sure that the capacitors
are fully discharged.
Table 4: Discharge Time
Frame
Minimum waiting time
D1h–D8h
20 minutes
Fx09–Fx10
20 minutes
E1h–E4h
40 minutes
Fx11–Fx12
40 minutes
AN389655468601en-000101 / 130R07672 | Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
•
•
•
1.
2.
3.
4.
-
NOTICE
ELECTROSTATIC DISCHARGE
Electrostatic discharge can damage components.
Ensure discharge before touching internal frequency converter components, for example by touching a grounded, conduc-
tive surface or by wearing a grounded armband.
2.2 Top Fan Replacement
Select the fan replacement instructions based on the type of fan enclosure:
2.3 Removing the Top Fan and Grill.
2.5 Removing the Top Fan and Single Fan Housing.
2.7 Removing the Top Fan and Double Fan Housing.
2.3 Removing the Top Fan and Grill
To remove the top fan and grill, use the following steps. See Illustration 1.
Unfasten 2 screws (T25) and remove the front cover from the frequency converter.
Unplug the top fan cable connector.
Pull the top fan cable through the cable access hole, freeing it from the cabinet.
Remove 2 screws (T25) from opposite corners of the top fan grill.
AN389655468601en-000101 / 130R0767 | 3Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
5.
1.
2.
3.
4.
5.
6.
Lift the grill and top fan from the frequency converter.
e30bg393.10
1
2
3
4
5
6
Illustration 1: Top Fan with Grill
1
Screw (T25)
2
Top fan grill
3
Top fan
4
Top fan cable and connector
5
Top vent
6
Cable access hole
2.4 Installing the Top Fan and Grill
To install the top fan and grill, use the following steps.
Feed the top fan cable through the cable access hole on the top of the frequency converter.
Reconnect the in-line fan cable connector.
Position the fan on top of the frequency converter with the air direction arrows pointing upward and away from the unit.
Place the grill on top of the fan.
Fasten 2 screws (T25) in opposite corners of the grill, securing the top fan to the frequency converter.
Position the front cover on the frequency converter, and fasten with 2 screws (T25).
AN389655468601en-000101 / 130R07674 | Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
1.
2.5 Removing the Top Fan and Single Fan Housing
To remove a fan with a single fan housing, use the following steps. See Illustration 2.
Unfasten 2 screws (T25) and remove the front cover from the frequency converter.
Unplug the top fan cable connector.
Pull the top fan cable through the cable access hole, freeing it from the cabinet.
Remove 2 screws (T25) from the top fan housing.
Slide the fan housing and top fan out from under the retaining clips on top of the frequency converter.
1
2
3
4
5
6
e30bg394.10
Illustration 2: Top Fan with Single Fan Housing
1
Single top fan housing
2
Screw (T25)
3
Top fan
4
Top fan cable and connector
5
Retaining clip
6
Cable access hole
2.6 Installing the Top Fan and Single Fan Housing
To install the top fan and single fan housing, use the following steps.
Feed the top fan cable through the cable access hole on the top of the frequency converter.
Reconnect the in-line fan cable connector.
Place the top fan in the fan housing with the air direction arrows pointing upward and away from the frequency converter.
Slide the fan housing and fan under the retaining clips on top of the frequency converter.
Fasten 2 screws (T25) in the single fan housing, securing it to the frequency converter.
Place the front cover on the frequency converter, and fasten with 2 screws (T25).
2.7 Removing the Top Fan and Double Fan Housing
To remove the top fan and double fan housing, use the following steps. Refer to Illustration 3.
Unfasten 4 screws (T25) and remove the upper front cover of the frequency converter.
AN389655468601en-000101 / 130R0767 | 5Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
7.
Remove 2 screws (T25) from the fan housing.
Slide the fan housing and fans out from under the retaining clips.
Unplug the in-line connector attaching the fan cable.
Feed the cable through the cable access hole.
Lift the fans from the pins in the fan housing.
1
e30bf769.10
2
3
4
5
6
Illustration 3: Top Fan and Double Fan Housing
1
Double fan housing
2
Mounting pin (inside housing)
3
Fan
4
Screw (T25)
5
Cable access hole
6
Retaining clip
2.8 Installing the Top Fan and Double Fan Housing
To replace the top fan and double fan housing, use the following steps.
Place 2 fans over the pins in the double fan housing.
Check that the air direction arrows point upward and away from the frequency converter.
Feed the fan cables through the cable access hole in the top plate.
Attach the in-line cable connectors.
Slide the double fan housing and 2 fans into position under the retaining clips.
Secure 2 screws (T25) in the fan housing.
Replace the upper front cover on the frequency converter, and fasten with 4 screws (T25).
AN389655468601en-000101 / 130R07676 | Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
AN389655468601en-000101 / 130R0767 | 7Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
danfossdrives.com
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other tech-
nical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be
considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility
for possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without
changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
*130R0767*
*M00345* AN389655468601en-000101 / 130R07678 | Danfoss A/S © 2022.03
Installation
Top Fan Kit for FA09-FA12/D3h-D4h/E3h-E4h
Application Guide
This manual suits for next models
2
Table of contents
Other Danfoss DC Drive manuals
Danfoss
Danfoss VLT FC 103 User manual
Danfoss
Danfoss VLT FC Series User manual
Danfoss
Danfoss VLT AutomationDrive FC 302 User manual
Danfoss
Danfoss VLT DriveMotor FCP 106 User manual
Danfoss
Danfoss VLT 2800 Series Specification sheet
Danfoss
Danfoss VLT AutomationDrive FC 302 Operating instructions
Danfoss
Danfoss VLT 5000 FLUX User manual
Danfoss
Danfoss VLT AQUA Drive FC 202 Guide
Danfoss
Danfoss VLT PROFIBUS DP MCA 101 Operating instructions
Danfoss
Danfoss VLT AQUA Drive FC 200 User manual
Danfoss
Danfoss FC 300 User manual
Danfoss
Danfoss FCM 300 Series Specification sheet
Danfoss
Danfoss VLT Micro Drive FC 51 Series Guide
Danfoss
Danfoss VLT FC Series User manual
Danfoss
Danfoss VLT AutomationDrive FC 300 User manual
Danfoss
Danfoss VLT AutomationDrive FC 300 Operating instructions
Danfoss
Danfoss FC 300 User manual
Danfoss
Danfoss VLT AQUA Drive FC 202 User manual
Danfoss
Danfoss VLT 5000 Series Instruction manual
Danfoss
Danfoss VLT FC 100 User manual
Popular DC Drive manuals by other brands
Rockwell Automation
Rockwell Automation PowerFlex 700S Programming manual
WEG
WEG DeviceNet CFW500 user manual
Siemens
Siemens SINAMICS G List manual
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions
SOMFY
SOMFY JR RU 30 instructions
Beckhoff
Beckhoff AX8911 Documentation