Dancover Titanium User manual

Assembly Manual

Titanium:

4x10x3,5x4,5

4x12x3,5x4,5

4x14x3,5x4,5

Table of content.

1. FrontPage.

2. Table of content.

3. List of parts.

4. Construction.

7. Mounting the covers.

9. Contact Information.

Parts list Titanium 4x10x3,5x4,5m/4x12x3,5x4,5m/4x14x3,5x4,5m

Part

Description

Quantity (pcs.)

Curved roof tubes (top) at two ends

2/2/2

Curved roof tubes (top) in the middle

4/5/6

Curved roof tubes (side) at two ends

4/4/4

Curved Roof Tubes (side) in the middle

8/10/12

Lower sidewall with base plate (in the middle)

8/10/12

Lower sidewall with base plate (at two ends)

4/4/4

Upper sidewall (at two ends)

4/4/4

Upper sidewall (in the middle)

8/10/12

Roof purlin and horizontal wall at both sides

65/78/91

Horizontal tube for front and back panel

8/8/8

Slant supporting tube

8/8/8

Roof cover

1/1/1

Front cover

1/1/1

Back cover

1/1/1

Stake peg

24/28/32

Rope for fixing cover

Bolts with nuts M14x30

154/168/182

M14x70

36/42/48

M12x50

16/16/16

M14x50

8/8/8

Inner joint for cross tubes and slant supporting tubes

8/8/8

Assembly.

4 x 10 x 3,5 x 4,5 m

4 x 12 x 3,5 x 4,5 m

4 x 14 x 3,5 x 4,5 m

Step #1:

Place base plates as shown in figure #1. Make sure that diagonals are equal in

length. Secure base plates with stake pegs. Make sure to use at least 2 stake

pegs per base plate and drive them into the ground so they cross each other as

shown in figure #3.

Step #2:

Assemble two sidewalls and connect them as shown in figure #2. Make sure that

all bolts are secured tightly and placed from the outside and in, to avoid damage

on the cover. Figure 3 and 4 shows how joints should be assembled, both

shown from inside.

Figure 1

Figure 2

Figure3 Figure 4

Step #3:

Connect the two sidewalls with the curved roof tubes. Then connect these with the

horizontal bars as shown in figure # 5. Figure #6 and #7 show how joints are sup

posed to be assembled.

Step #4:

Assemble the next two sidewalls in extension of the already erected sides as

shown

Figure 5

Figure 6

Figure 7

Step # 5

Repeat steps #3 and #4 until the entire frames has been erected. Note that you

have to install windcrosses in the sidewall sections closest to the corners. (see

Figure #4). It should look like figure #8.

Step #6:

Make sure that all bolts are inserted from the outside in before proceeding with

the cover. Make sure all foot plates are secured to the ground.

Figure 8

Figure 9

Mounting the Cover

Step #7

Tie in a crossbeam in one side of the cover. as shown in figure # 10.

Step #8

Pull the cover over the top of the structure using 3 ropes tied to the crossbeam.

See figure # 11

Step #9:

Make sure that the cover sits on evenly on both sides of the frame.

Step #10:

Tie the cover to the bottom tensioning bar. Make sure that it is tightened.

Figure 10

Figure 11

Step # 11:

Mount the front and the back cover by weaving the rope around the bars as

shown in figure # 12 and # 13. Do the same with the roof cover. Make sure to use

one rope for each covers.

Step # 12:

Make sure that the edge of the roof cover overlaps the front/back cover (over the

end bars) as shown in figure #14. Slide a rope through the end sleeves and

tighten the rope through the hoops of the corner footplates.

Step # 13:

Make sure all ropes are secured and tight.

Figure 12

Figure 13

figure 14

Contact Information.

Dancover UK

Tel. 020 722 102 20

Fax. (+45) 70 26 76 30

E-mail: mail@dancover.co.uk

VAT NO. 894 5631 80

For warranty/claims please fill out our form at:

http://www.dancovershop.com/info.asp?text=5

And we will get back to you as soon as possible.

Other manuals for Titanium

This manual suits for next models

Table of contents

Other Dancover Tent manuals

Dancover

Dancover Arched PE User manual

Dancover

Dancover 2,4m Series User manual

Dancover

Dancover PARTY TENT SEMI PRO CombiTent 8m Series User manual

Dancover

Dancover ProShed User manual

Dancover

Dancover Storage Tent PRO User manual

Dancover

Dancover Basic-1339H User manual

Dancover

Dancover Storage tent PRO 3,6m Series User manual

Dancover

Dancover Pagoda Tent EventZone User manual

Dancover

Dancover ST01100 User manual

Dancover

Dancover Teepee User manual

Dancover

Dancover Multipavillon 6x6m User manual

Dancover

Dancover Titanium User manual

Dancover

Dancover SEMI PRO 6x12m User manual

Dancover

Dancover Semi PRO 9x12m User manual

Dancover

Dancover SEMI PRO 7x7m User manual

Dancover

Dancover PRO XL User manual

Dancover

Dancover Semi Pro XL 6m Series User manual

Dancover

Dancover Garage tent 3,77x7,3x3,24m PVC User manual

Dancover

Dancover Pole Tent Semi PRO 6x6m User manual

Dancover

Dancover Pagoda Tent PRO+ 10x10m EventZone User manual

Dancover

Dancover AC153200 User manual

Dancover

Dancover B788 User manual

Dancover

Dancover 5.4m Series User manual

Dancover

Dancover TentZing User manual

Popular Tent manuals by other brands

OZTENT

OZTENT JV SIGNATURE EDITION owner's manual

GigaTent

GigaTent Summer Chalet Mini Tent owner's manual

Coleman

Coleman 2000007827 Setup instructions

ShelterLogic

ShelterLogic 107153 Assembly instructions

Outsunny

Outsunny 84C-230 manual

Napier

Napier SPORTZ COVE 61 Series instructions

EuroTrail

EuroTrail ATLANTIS PRO manual

Reimo

Reimo Marina instructions

TiiTENT

TiiTENT TB300 manual

Coleman

Coleman 2000033134 Assembly & instruction manual

Ozark Trail

Ozark Trail W784.1 Assembly instructions and owner's manual

SlingFin

SlingFin CrossBow 2 instructions

Coleman

Coleman 9600-141 instructions

Palram

Palram Arizona 5000 Wave - WINGS manual

COVERPRO

COVERPRO 56184 Owner's manual & safety instructions

Vango

Vango Zenith 100 instructions

Costway

Costway PATIOJOY OP70818 user manual

Clarke

Clarke PUC 88 Assembly guide