Dancover GH140055 User manual

21-04-2021

for

Arched Cover f/Raised Garden Bed

0,75x1,5x0,45m

Manual

NOTE: The lower bed is supplied separately, in the photo only an application example.

NOTE: Use protective gloves to assemble the structure!

COVER FOR RAISED GARDEN BED

No.

Pcs

1. 4

2. 2

3. Arches 1230 mm 3

4. 2

5. 4

6. Rear and side reinforcements (folded ends) 4

7. Hinges 50x40 mm 2

8. 4

9. 64

10. 25

11. 93

12. 27

13. 3 m

14. 2

15. 1

16. 1

Corners for connecting the rear and side parts with 4 holes 40x40 mm

Parts list

Side parts 783 mm

Front part 730 mm

Reinforcements between the arches 688 mm

Corners for polycarbonate mounting 40x30 mm

M5x16 mm screws

M5x40 mm screws

M5 nuts

Gaskets plastic, transparent

Tape for sealing sheet ends

PC cover ends

Cover for covering 1400x1610 mm

Handle

Installation instruction

Arrange the parts as shown in the figure. 783 mm long parts on the sides (1) and 730 mm long parts on the

ends (2).

Join the corner parts of the structure (1; 2) with the corners for connecting the rear and side

parts (5). Use M5x16 mm bolts (9) with nuts (11). Do the same for all 4 corners.

At the joints of the side parts (1), turn only 2 lower M5x16 mm (9) lower bolts

with nuts (11). Leave the upper holes free. Do the same on both sides.

Fasten the rear and side parts using reinforcements (bent ends) (6) and M5x16 mm

screws (9) and M5 nuts (11). Do the same for all 4 corners.

Fasten the arches to the already assembled structure

using M5x16 mm screws (9) and M5 nuts (11). A total

of 3 arches (3) are fastened: 1 at the ends and 1 in the

middle.

Fasten the fastenings between the arches (4) with screws M5x16 mm (9) and nuts (11) (2 pcs.).

10.

11.

Fasten the polycarbonate sheets (14) with M5x40 mm screws (10)

with transparent spacers (11) and nuts (11) at the bottom and

M5x16 mm screws (9) with transparent spacers (12) and nuts (11)

through the corners. Do the same on both sides. Important: Peel off

the protective polycarbonate films before placing the sheet on the

structure. Do not mix polycarbonate sides. The UV-resistant side

must face outwards. This is indicated by the marked film.

Place the assembled bed cover on an existing metal bed. Make sure the

cover is in place. Mark the holes for drilling holes in the bed. Using a 6 mm

metal drill (drill not included), drill 4 holes to attach the cover to the structure.

Screw the cover to the structure with M5x16 mm screws (9) with nuts (11)

through the hinges.

Tighten the structure using a screwdriver and 8 mm head.

Fasten the hinges to one of the side parts (1) with M5x16 mm bolts (9) and nuts (11).

Fasten the corners (8) for fixing the polycarbonate to the rear arches with M5x16

mm screws (9) and M5 nuts (11).

12.

13.

14.

15.

Fasten the handle (16) using M5x40 mm bolts (10) and M5 nuts (11).

Seal the edges of the polycarbonate with the added aluminum strip (13).

Cover the structure with a transparent tarpaulin (15). Level so that the entire

structure is evenly covered. The awning is attached to the structure with M5x40

mm screws (10) with M5 gaskets (11) and nuts (12). The edges of the sheet must

engage on the sides behind the polycarbonate sheets.

Use a sharp knife to trim the protruding polycarbonate sheets (14) to the structure.

For more information

please visit:

www.dancovershop.com

Dancover A/S

Lyngevej 16A, Nørre Herlev

3400 Hillerød

Denmark

Head office:

Table of contents

Other Dancover Greenhouse Kit manuals

Dancover

Dancover TITAN Arch 90 User manual

Dancover

Dancover TITAN Arch 130 User manual

Dancover

Dancover TITAN Peak 240 4,2 User manual

Dancover

Dancover TITAN Classic 480 Series User manual

Dancover

Dancover Orangery GH152005 User manual

Dancover

Dancover TITAN Arch 280 User manual

Dancover

Dancover GH152200 User manual

Dancover

Dancover ZEN 6.25M2 User manual

Dancover

Dancover GH152100 User manual

Dancover

Dancover Polytunnel Greenhouse User manual

Dancover

Dancover GH158040 User manual

Dancover

Dancover GH152190 User manual

Dancover

Dancover GH82020 User manual

Dancover

Dancover STRONG Series User manual

Dancover

Dancover ARROW GH120025 User manual

Dancover

Dancover TITAN Classic User manual

Dancover

Dancover STRONG 3x4 m User manual

Dancover

Dancover ARROW 2,6 User manual

Dancover

Dancover GH82121 User manual

Dancover

Dancover Orangery User manual

Dancover

Dancover GH152015 User manual

Dancover

Dancover GH16060 User manual

Dancover

Dancover TITAN Arch+ 320 User manual

Dancover

Dancover GH152180 User manual

Popular Greenhouse Kit manuals by other brands

ACD PRESTIGE

ACD PRESTIGE MR3 H manual

Vitavia

Vitavia VA0040-TRP Assembly instructions

VegTrug

VegTrug Nursery manual

Riverstone Networks

Riverstone Networks Monticello 041315V Assembly instructions

STC

STC Easy Grow 6x12 Greenhouse Assembly instructions

CLIMA POD

CLIMA POD Spirit V7 Series Assembly instructions

Vitavia

Vitavia GAIA JUMBO Assembly instructions

Palram

Palram Harmony 6'x4' Assembly instructions

ClearSpan

ClearSpan Storage Master 104598 instruction manual

Sproutwell

Sproutwell GRANGE - 5 Assembly instructions

ACD

ACD Piccolo 03 manual

Growhouse

Growhouse Lean To 6 x 8 Erection and Glazing Instructions

Riverstone Networks

Riverstone Networks Grower's 181010V Assembly instructions

GrowSpan

GrowSpan 500 Series manual

Robinsons

Robinsons 5ft Wide LEAN-TO Assembly instructions

Botanica

Botanica E manual

PNI

PNI SP6000 user manual

Hortus

Hortus 211-203 Assembling manual