Daewoo DX-C811N User manual
8 channel DVR (Digital Video Recorder)
Operating Instructions
Model : DX-C811N
S
SAFETY PRECAUTIONS
1
Digital Video Recorder
@!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of un insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
@
!
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Precautions
• Refer all work related to the installation of this
product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
To prevent the appliance from overheating, place it at
least 5 cm (2 inches) away from the wall.
• Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and contact qualified
service personnel for service.
• Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers. There are no user-serviceable parts inside.
Contact qualified service personnel for maintenance.
• Handle the appliance with care.
Do not strike or shake, as this may damage the
appliance.
• Fully charge up the backup battery.
Keep the appliance turned on for at least 48 hours to
recharge the backup battery. This procedure is
necessary when using the appliance for the first time
or after it has been unplugged for a long time from
the AC outlet. Insufficient charging of the battery may
cause erasure of settings if the AC power supply
should fail. The battery, if fully charged, will back up
the settings for 480 hours in an ordinary environment.
• Do not expose the appliance to water or moisture,
nor try to operate it in wet areas.
Do take immediate action if the appliance becomes
wet. Turn the power off and refer servicing to
qualified service personnel. Moisture may damage
the appliance and also cause electric shock.
• Do not use strong or abrasive detergents when
cleaning the appliance body.
Use a dry cloth to clean the appliance when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.
• Do not operate the appliance beyond its specified
temperature, humidity or power source ratings.
Do not use the appliance in an extreme environment
where high temperature or high humidity exists. Use
the appliance at temperatures within 5°C – 35°C
(41°F – 104°F) and a humidity below 90 %. The input
power source for this appliance is 110V-220V AC
50/60Hz.
T
TABLE OF CONTENTS
2
Digital Video Recorder
CONTROLS
Front Panel ...................................................................................................................................... 4
Rear Panel ....................................................................................................................................... 6
Remote Control .............................................................................................................................. 7
INSTALLATION
Camera, Monitor, Microphone, Alarm sensor and Power cord ................................................. 8
Alarm inputs and Alarm outs ........................................................................................................ 8
PAN/TILT/ZOOM Camera .............................................................................................................. 9
PC system requirement for Network connection ........................................................................ 9
OPERATION
BEFORE OPERATION .................................................................................................................... 10
Time & Date setting Screen Position Adjustment
LIVE VIEW .................................................................................................................................... 11
Live view mode switching Border Line color
Auto Sequence Mode Sequence Interval
PTZ Camera Select Brightness, Contrast & Color adjustment
Display off
BASIC RECORDING ...................................................................................................................... 15
ALARM RECORDING ................................................................................................................... 18
PRE-RECORDING .......................................................................................................................... 20
SCHEDULE RECORDING (TIMER RECORDING) ......................................................................... 21
MOTION DETECTED RECORDING (MOTION RECORD) ............................................................ 23
TIME SEARCH – TIME AND DATE SEARCH ............................................................................. 25
PLAYBACK .................................................................................................................................... 26
Basic playback Reverse playback
Field by field (Still field) Playback Adjusting Playback Speed
Audio playback (AUDIO-PB)
ALARM/MOTION – ALARM LIST SEARCH ............................................................................... 29
SYSTEM SET ............................................................................................................................... 30
NETWORK SET ............................................................................................................................. 33
INFORMATION, LOG LIST & ZOOM ........................................................................................... 34
PAN/TILT/ZOOM CAMERA CONTROL ...................................................................................... 35
EXTERNAL BACKUP DEVICE CONTROL (USB DISK TYPE) ...................................................... 37
CONTENTS
3
Digital Video Recorder
CLIENT PROGRAM
How to install and connect ........................................................................................................ 40
Features ....................................................................................................................................... 41
Image file down load from the DVR server ................................................................................ 43
DVR Setting .................................................................................................................................. 44
Local Player .................................................................................................................................. 46
SPECIFICATION 52
HOW TO CONNECT MODEM 47
Accessories
REMOTE CONTROL 2 BATTERY (AA size) POWER CORD INSTRUCTION MANUAL
DVRID
ZOOM
-._
P/T/Z
ABC DEF
MNOJKLGHI
VWXSTU
YZ@
MENU
DISPLAY
PQR
AUDIO-PB
STANDBY/ON
F1 F2 F3 F4
F5 F6 F7 F8
ENTER A-SEARCH
CANCELT-SEARCH
L-SEARCH
STEP
REW
REC
INFO LOG ALARM
STOP TIMER
PLAY FF
BACKUP RESTORE
C
CONTROLS
4
Front Panel
Digital Video Recorder
1 STANDBY/ON
Press this button to turn the power on; press again to turn the power off. The POWER LED (red) lights/
goes off when the power is on/off. It flashes when switching during initializing and disk checking.
2 LOCK
Press this button to lock all units key buttons including the remote controller. The LOCK LED (green)
lights/ goes off when the lock is on/off. To release press it again and enter the password.
3 ZOOM
Press this button to display zoom area box; press again to enlarge the image. Pressing cursors can move
this zoom area.
4 RESTORE
Press this button to restore recorded data to the main hard disk from an archive device only when an
external USB DAT24 is connected.
5 BACKUP
Press this button to begin making a backup copy of the hard drive. If there is no peripheral recording
device connected, this button cannot be used.
6 SCHEDULE
Press this button to make scheduled recording standby. The SCHEDULE LED (green) lights/ goes off
when the schedule is on/off.
7 P/T/Z FOCUS
Press this button to control a PAN/TILT/ZOOM camera via RS-232 connection.
8 INFO
Press this button to display current system information.
9LOG
Press this button to display the log list.
10 TIME SEARCH
STANDBY/ON LOCK
ZOOM
REC STOP PLAY STILL AUDIO-PB
RESTORE
BACKUP
SCHEDULE
P/T/Z/FOCUS
INFO
LOG
MENU
ENTER/SEL
TIME SEARCH
CANCEL
POWER REC SCHEDULE LOCK
123
456
789
+10 -10/0
DISPLAY SHUTTLE HOLD
OSD OFF
ALARM SEARCH
1 2
3
18 19 20 21 22 23 24 25
4 6 8 10 12 14 15 16 17
5 7 9 11 13
CONTROLS
CONTROLS
5
Digital Video Recorder
Press this button to display the Time Search menu.
11 ALARM SEARCH
Press this button to display the Alarm Search menu.
12 MENU
Press this button to display the MAIN MENU screen. It is also used as EXIT button to exit all kinds of
OSD screen.
13 ENTER /SEL
14 DIRECTION KEY (†…œ √)
In Menu setup mode, used to move the cursor. In Zoom mode, used to move the zoom area.
15 CANCEL / OSD OFF
In Zoom mode, pressing this button reduces the image. In stop mode and playback mode, pressing this
button disappears time & date OSD. Pressing it again appears the OSD.
16 NUMERIC KEY (1~9)
Used to enter the password and select the camera numbers.
17 Mode indicator
18 REC
Press this button. Then, the red REC LED lights on the front panel and recording starts.
19 STOP
To stop recording, press this button.
20 PLAY
Press this button to display record file.
21 STILL
Press this button to still the display.
22 AUDIO PB
Press this button to synchronize the sound track with the scenes.
23 DISPLAY
Press this button to display the cameras in quad mode or to switch sequence function.
24 SHUTTLE HOLD
This button retains the selected playback or reverse playback speed. Rotate the SHUTTLE ring to the
desired search speed, and then press the SHUTTLE HOLD button while holding the SHUTTLE ring at the
selected search speed. Search speed will be maintained even when the SHUTTLE ring is returned to its
original position.
25 JOG AND SHUTTLE
SHUTTLE ring
: Use the ring to set various menus and search functions, to adjust the playback speed, and
to rewind or forward the image.
JOG dial
: Use the dial to set various menus and search functions, and to forward or reverse the image
during playback (field-by-field).
CONTROLS
6
Rear Panel
Digital Video Recorder
1 CAMERA IN connectors
These are BNC input connectors for 8 cameras.
2 VIDEO OUT connectors
A BNC standard composite video output connector.
3 AUDIO OUT connector
This is an RCA output for an audio signal.
4 AUDIO IN connector
This is an RCA input for an audio signal.
5 MIC jack
This is an input connector for a microphone.
6 S-VHS OUT connector
An S-VHS connector for separate luminance and chrominance (Y/C) signals. This is an RCA input
connector for an audio signal.
7 USB 2.0 connector
This connector is for peripheral recording device.
8 ALARM IN/OUT terminal
9 RJ-45 ETHERNET connector
10 RS-232C
11 AC power socket
12 Power Fan
1
CAMERA
IN
234
56
AUDIO MIC
OUT IN
78
COMPOSITE
S-VIDEO
VIDEO OUT
USB
ETHERNET RS-232C
AC IN
100V 230V
ALARM IN 1
ALARM IN 2
ALARM IN 3
ALARM IN 4
GND
ALARM IN 5
ALARM IN 6
ALARM IN 7
ALARM IN 8
GND
ALARM OUTPUT
GND
1 2
3 4 5 6 7 8 9 10 12
11
CONTROLS
7
Remote Control
Digital Video Recorder
DVR ID
Pan/Tilt/Zoom
Zoom
Number/Letter
MENU
ENTER
CURSOR
TIME SEARCH
LIST SEARCH
Field by Field
REW
REC
LOG
SYSTEM INFORMATION
Option (Not used)
CONTROLS
STANDBY/ON
AUDIO-PB
DISPLAY/QUAD
CANCEL
ALARM SEARCH
RESTORE
BACKUP
FF
PLAYBACK
TIMER (SCHEDULE)
STOP
Option (Not used)
DVR ID
ZOOM
-._
P/T/Z
ABC DEF
MNOJKLGHI
VWXSTU
YZ@
MENU
DISPLAY
PQR
AUDIO-PB
STANDBY/ON
F1 F2 F3 F4
F5 F6 F7 F8
ENTER A-SEARCH
CANCELT-SEARCH
L-SEARCH
STEP
REW
REC
INFO LOG ALARM
STOP TIMER
PLAY FF
BACKUP RESTORE
I
INSTALLATION
8
Camera, Monitor, Microphone, Alarm sensor and Power cord
Alarm inputs and Alarm outs
Digital Video Recorder
1
CAMERA
IN
234
56
AUDIO MIC
OUT IN
78
COMPOSITE
S-VIDEO
VIDEO OUT
USB
ETHERNET RS-232C
AC IN
100V 230V
ALARM IN 1
ALARM IN 2
ALARM IN 3
ALARM IN 4
GND
ALARM IN 5
ALARM IN 6
ALARM IN 7
ALARM IN 8
GND
ALARM OUTPUT
GND
MONITOR
VIDEO OUT
or
S-VIDEO OUT
AUDIO OUT
MICROPHONE
CAMERA#1 SENSOR#1
Up to 8
cameras
ALARM IN
GND
POWER
CORD
MIC IN
ALARM IN 1
ALARM IN 2
ALARM IN 3
ALARM IN 4
GND
ALARM IN 5
ALARM IN 6
ALARM IN 7
ALARM IN 8
GND
ALARM OUTPUT
GND
Connection of N.O (Normally Open)
✍NOTE . . .
The maximum of Alarm Output is 1mA, 5VDC.
INSTALLATION
9
PAN/TILT/ZOOM Camera
Digital Video Recorder
1
C&B Technology (Model: PTZ102)
2
The other models: as buyers request; the camera sample and protocol should be supported.
INSTALLATION
PC system requirement for Network connection
(a) 500MHz CPU
(b) 128MB RAM
(c) 4MB Video Card
(d) Windows 98SE, 2000, ME
(e) Spare 10/100-BaseT Ethernet Port
(f) RJ-45 Network Cable
(g) CAT-5 UTP Cable for LAN (Crossover cable for direct connect to PC)
1
CAMERA
IN
234
56
AUDIO MIC
OUT IN
78
COMPOSITE
S-VIDEO
VIDEO OUT
USB
ETHERNET RS-232C
AC IN
100V
ALARM IN 1
ALARM IN 2
ALARM IN 3
ALARM IN 4
GND
ALARM IN 5
ALARM IN 6
ALARM IN 7
ALARM IN 8
GND
ALARM OUTPUT
GND
PTZ CAMERA
CONTROL LINE
CAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8
RS485 to RS232C Converter
✍NOTE . . .
We do not guarantee for all kind of PC even though the PC meets the specification.
✍
Disclaimer
The connection and remote viewing of the DVR may not be successful on all PC’s due to the variety of PC’s internet
connection settings. Please contact the technical support for further assistance.
Other manuals for DX-C811N
1
Table of contents
Other Daewoo DVR manuals
Daewoo
Daewoo DSD-9502T User manual
Daewoo
Daewoo Q253 User manual
Daewoo
Daewoo DV-K88 series User manual
Daewoo
Daewoo Video recorder User manual
Daewoo
Daewoo DVR-1989D User manual
Daewoo
Daewoo MC2128 User manual
Daewoo
Daewoo DX-C811N User manual
Daewoo
Daewoo DV-K824DY User manual
Daewoo
Daewoo ST441S User manual
Daewoo
Daewoo DX-N111N User manual
Daewoo
Daewoo SQ200K User manual
Daewoo
Daewoo CT Series User manual
Daewoo
Daewoo DSD-9520 User manual
Daewoo
Daewoo Video recorder User manual
Daewoo
Daewoo PROline VR516 User manual
Daewoo
Daewoo VQ230K User manual
Daewoo
Daewoo SV-871 User manual
Daewoo
Daewoo DS-360 User manual
Daewoo
Daewoo DV-K224D User manual
Daewoo
Daewoo EQ250K User manual
