D-Link DAP-2230 Instruction sheet

Other manuals for DAP-2230

3

This manual suits for next models

7

Table of contents

Other D-Link Wireless Access Point manuals

D-Link

D-Link DAP-3220 User manual

D-Link

D-Link DWL-7200AP - AirPremier AG - Wireless Access... User manual

D-Link

D-Link D DWL-8200AP DWL-8200AP User manual

D-Link

D-Link DWL-2700AP - AirPremier Outdoor Wireless Access... User manual

D-Link

D-Link AirPremier N DAP-2690 User manual

D-Link

D-Link DWL-8500AP Service manual

D-Link

D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... User manual

D-Link

D-Link DWL-7200AP - AirPremier AG - Wireless Access... User manual

D-Link

D-Link DAP-400P User manual

D-Link

D-Link DWL-X8630APE User manual

D-Link

D-Link DAP-2682 User manual

D-Link

D-Link DWL-6600AP User manual

D-Link

D-Link Nuclias Connect DAP-2622 User manual

D-Link

D-Link AirPremier N DAP-2690 User manual

D-Link

D-Link AC1200 User manual

D-Link

D-Link AirPremier N DAP-2690 User manual

D-Link

D-Link DAP-3666 User manual

D-Link

D-Link DWL-8720AP User manual

D-Link

D-Link DAP-1665 User manual

D-Link

D-Link NUCLIAS CONNECT DAP-2680 User manual

D-Link

D-Link NUCLIAS CONNECT DAP-2680 User manual

D-Link

D-Link DWL-8720AP User manual

D-Link

D-Link DWL-2230AP - xStack - Wireless Access Point User manual

D-Link

D-Link DWS-3024L User manual

Popular Wireless Access Point manuals by other brands

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide

EnGenius

EnGenius EAP350 user guide

- 1 -

Manual to install the firmware

For DAP-2230 Rev.A, DAP-2310 Rev.B, DAP-2360 Rev.B, DAP-2610 Rev.A,

DAP-2660 Rev.A, DAP-2680 Rev.A, DAP-2695 Rev.A and DAP-3662 Rev.A

Important:

After the firmware upgrade the DAP can’t be used in a Central Wi-Fi Manager (CWM)

System or in an AP-Array System.

You would need to install the „not-NC-firmware“ into your DAP again.

See the attached manual

“Manual for Downgrade from Nuclias Connect Firmware.pdf”

Recommendation:

Connect the DAP and the PC, with it you make the firmware upgrade, with a LAN cable

with your network, there is also the DHCP server available.

For the installation of the firmware please follow this.

1. Get access to the setup of your DAP via web browser.

The default address is http://192.168.0.50 or when you already implemented the DAP

into your network please call the IP-address this you configured into you DAP or this the

DAP got from the DHCP server in you network.

2. By default the setup has no password.

At User name enter admin and then click onto Login.

Note:

Did you set an Admin-Password please enter this.

Do you don’t know the Admin-Password anymore you must reset the DAP to factory

defaults (Factory Reset).

For this press the Reset button of the running DAP for example with a paperclip or pencil

for 5-10 seconds.

- 2 -

3. At the top choose the menu Maintenance and then in the open menu

Firmware and SSL Certification Upload.

4. At Upload Firmware From File click onto Choose File.

Pick the previously un-zipped firmware file

DAP-2610_RevA_Firmware_200r063.bin

and click onto Upload.

5. The firmware will be installed now.

This takes close to 5 minutes.

6. Important:

You must reset the DAP to factory defaults (Factory Reset).

For this press the Reset button of the running DAP for example with a paperclip or pencil

for 5-10 seconds.

After the DAP is restarted it is ready to integrate into a Nuclias Connect environment.

- 3 -

If your DAP is build-in and you cant’t press the Reset button easily you

can reset it over the setup instead.

7. Log-in into the setup again.

At User name enter admin and then click onto Login.

Did you set an Admin-Password please enter it.

8. At System Country choose any country and click onto Update.

- 4 -

9. Please wait 2 minutes.

10. Log-in into the setup again.

At User name enter admin.

At Password please enter also admin.

From now this is the default Admin password until you configure the DAP new.

Click onto Login.

11. At the top choose the menu System.

Click onto Restore.

- 5 -

12. Click onto OK.

13. Please wait two minutes.

After the DAP is restarted it is ready to integrate into a Nuclias Connect environment.

To check the detailed version number of the installed version please log-in into the setup

of your DAP.

In the address line of your web browser enter

http://<ip-adresse>/version.txt

The <ip-adresse> is for the IP-address of your DAP.

A page with detailed information about the firmware appears.