D-Link DXS-3400 SERIES User manual

- 1 -

HowTo Stack DXS-3400-Series

The DXS-3400-Series is a stackable switch.

The Stack can be built by 2 (single ring/chain) ports or 4 (double ring/chain) ports.

Be advised, that depending of which Stacking mode (2-port or 4-port) you choose the stacking ports will differ.

Example of Single Duplex Chain, showing different ports

- 2 -

Example of Single Duplex Ring, showing different ports

- 3 -

Basically we recommend to set up the devices separately and to do the basic stack configuration by CLI/console

o 115200 baud

o 8 parity bits (8)

o No parity (N)

o 1 Stopbit (1)

- Login into the device and change into the „enable“ mode by typing

o Enable

- Afterwards change into the configuration mode to do the stack configuration

o configure terminal

- Choose 2-port or 4-port Stacking mode, depending on your setup

o stack bandwith 2-port

o stack bandwith 4-port

- define the priority of the dedicated unit within the stack

o the Unit with the highest priority = lowest number will become Master

o stack 1 priority 5

 the Stack Number 1 (Switch 1 of the max. 4) get the priority 5

- if required (we recommend) to renumber all units to their dedicated number within your stack, since this

will define which interface/port is assigned

o stack 1 renumber 2

 current stack ID 1 will become 2 after reboot

 this you should do at f.e. unit 2,3 & 4

- enabling the stacking mode by

o stack

- leave the configuration mode

o exit

- save the current settings

o copy running-config startup-config

- reboot the switch to activate the settings

o reboot

After successful settings and reboot of all switches, you can connect them with the stacking cables.

Wait some minutes, until the stack has been stabilized, then connect to the Master-Unit (LCD = H & 1)

- login again into “enable” mode and check the stacking status

o show stack

- save the current settings again for the whole stack now, so that all configuration as of now is persistent

on all switches within the stack

o copy running-config startup-config

Other manuals for DXS-3400 SERIES

Table of contents

Other D-Link Switch manuals

D-Link

D-Link xStack DGS-3620 Series User manual

D-Link

D-Link DGS-3130-54S User manual

D-Link

D-Link DSH-16 - Hub User manual

D-Link

D-Link DES-2108 User manual

D-Link

D-Link DI-707 User manual

D-Link

D-Link xStack DGS-3426P User manual

D-Link

D-Link DUB-M610 User manual

D-Link

D-Link xStack DGS-3610 Series Manual

D-Link

D-Link DKVM-16 - KVM Switch User manual

D-Link

D-Link DGS-1224TP - Web Smart Switch User manual

D-Link

D-Link xStack DGS-3620-52P User manual

D-Link

D-Link DGS-1005D - Switch User manual

D-Link

D-Link DES-3528 - xStack Switch - Stackable User manual

D-Link

D-Link DIS-100G-8W User manual

D-Link

D-Link DGS-3000-28X/B1A User manual

D-Link

D-Link DKVM-222 User manual

D-Link

D-Link DUB-CR200 User manual

D-Link

D-Link DUB-H4 - Hub - USB User manual

D-Link

D-Link DXS-3610 Series Manual

D-Link

D-Link DES-1018MP User manual

D-Link

D-Link DGS-1210 Series User manual

D-Link

D-Link DKVM-440 User manual

D-Link

D-Link DGS-1216T - Switch User manual

D-Link

D-Link DGS-1008P User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Getting started guide