D-Link DUB-H4 - Hub - USB User manual

This Installation Guide includes instructions for:

§Windows XP

§Windows 2000

§Windows Me

§Windows 98/98SE

§Macintosh OS 8/9

§Macintosh OS X/10

Installation Guide Contents:

Section 1:Installing the DUB-H4

Section 2:LED Indicators

Section 3:Tips and Technical Support

Package Contents:

Verify that your D-Link DUB-H4 package contains the following items. If

any items are missing,please contact your reseller.

§D-Link DUB-H4

§USB 2.0 Cable

§AC Power Adapter

Minimum System Requirements:

For proper usage, you must have the following at a minimum...

§Pentium 233-MHz or faster or equivalent with 32MB RAM

§Available USB 1.1 Port For USB 1.1 Operation

§Available USB 2.0 Port For USB 2.0 Operation

§Windows XP, 2000, Me, 98, 98SE,Mac OS 8, 9, or 10/X for USB 1.1

Operation

§Windows XP, 2000, Me, 98, 98 SEor Mac OS X for USB 2.0

Operation

D-Link DUB-H4

Hi-Speed USB 2.0 4-Port Hub

Installation Guide

Installing the DUB-H4

A. Plug the USB type B connector

(the larger end of the cable) into

the back of the DUB-H4.

B. Plug the AC adapter into the

DUB-H4 and into a power

socket in a power-strip or a wall

jack.

C. Plug the USB type A connector

(the narrow end of the cable)

into an available USB 2.0 port

on your computer (or USB 1.1

if you don’t have USB 2.0).

D. Your computer will automatically detect and install the DUB-H4.

You may now connect USB 2.0 or USB 1.1 devices to an available

USB port on the front of the DUB-H4.

Type A

Type

LED Indicators

The DUB-H4 features five LED indicators…

§The Power LED indicator is red and lights up when the DUB-H4 is

powered on by using the external power adapter. The DUB-H4 does

not run on power supplied from the computer (bus powered).

§The downstream LED indicators are green. Each port has one status

LED. The LED lights to indicate that the port is working.

§If a port becomes overloaded, a “current exceeded” event will take

place. The LED of the port will go off and the message “USB HUB

Current Limit Exceeded” appears on the monitor. Reset the DUB-H4

by disconnecting it for 5 seconds and then powering it back on by

connecting the AC power adapter.

LED Color Indicator

Power Red Power is on

Power Off Power is off

Downstream

Green Port is working

Downstream

Off Port is not working

Tips and Technical Support

Tips

§When connecting USB cables betweenUSB devices and the DUB-

H4, make sure that the cable is connected securely.

§Remember that when connecting USB 1.1 devices to a USB 2.0 hub

or host adapter, the USB 1.1 device will not work at USB 2.0 speeds.

§The DUB-H4 does not have an on/off switch. It is always on, once the

external power adapter has been plugged into a wall socket or power

source.

§Connecting USB 1.1 devices to the DUB-H4 may cause all USB

devices connected to the hub to work at USB 1.1 speed. To ensure

480Mbps throughput for your USB 2.0devices, don’t connect USB

1.1 and USB 2.0 devices to the hub at the same time.

§D-Link recommends that while using a USB device that includes an

AC power adapter, that you use the power adapter to ensure proper

power and current supply to that device.

§Please remember to unplug devices properly to ensure that no data

loss or corruption takes place with your operating system.

Technical Support

D-Link provides free technical support for customers within the United

States during the warranty period. U.S. customers can contact D-Link

Technical Support through our web site, e-mail or by phone.

D-Link Technical Support over Telephone:

§1-800-758-5489

§24 Hours a Day, 7 Days a Week

D-Link Technical Support over the Internet:

§support.dlink.com

§[email protected]

Other manuals for DUB-H4 - Hub - USB

This manual suits for next models

Table of contents

Other D-Link Switch manuals

D-Link

D-Link DES-1026G User manual

D-Link

D-Link DES-1008E User manual

D-Link

D-Link DIS-100G-5W User manual

D-Link

D-Link DIS-100G-10S User manual

D-Link

D-Link xStack DES-3526 User manual

D-Link

D-Link DWS-3024 User manual

D-Link

D-Link DES-6000 Series User manual

D-Link

D-Link DGS-1008T User manual

D-Link

D-Link 2x1000BASE-T User manual

D-Link

D-Link xStack DGS-3426 User manual

D-Link

D-Link DKVM-440 User manual

D-Link

D-Link DUB-H410 User manual

D-Link

D-Link DGS-1008D - Switch User manual

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manual

D-Link

D-Link DES-3028 User manual

D-Link

D-Link DXS-3250 - xStack Switch - Stackable User manual

D-Link

D-Link DGS-1024D - Switch User manual

D-Link

D-Link DES-1228 - Web Smart Switch User manual

D-Link

D-Link DIS-F200G Series User manual

D-Link

D-Link DUB-H7 - Hub - USB User manual

D-Link

D-Link DGS-3000 series User manual

D-Link

D-Link xStack DGS-3600 Series User manual

D-Link

D-Link DSS-100E-18P User manual

D-Link

D-Link DGS-1210-10/FL User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Getting started guide