D-Link DUB-104 User manual

Before You Begin

You must have at least the following:

•Pentium 233-MHz or faster or equivalent with 32MB RAM

•Available USB 1.1 Port For USB 1.1 Operation

•Available USB 2.0 Port For USB 2.0 Operation

•Windows XP, 2000, Mac OS 8, 9, or 10/X for USB 1.1 Operation

•Windows XP, 2000 or Mac OS X for USB 2.0 Operation

Check Your Package Contents

These are the items included with your purchase:

If any of the below items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice.

DUB-104 4-Port USB 2.0 Pocket Hub

This product can be used with

the following operating systems:

Windows XP, Windows 2000, Mac

OS 8, 9, and 10.1 or above.

DUB-104

4-Port USB 2.0 Pocket Hub

Power Adapter (5V 2.5A) Using a power supply

with a different voltage rating

will damage and void the

warranty for this product.

Installing the DUB-104

A. Plug the AC adapter into the

DUB-104 and into a power

socket in a power-strip or a

wall jack. (optional)

C. Your computer will automatically

detect and install the DUB-104.

You may now connect USB 2.0

or USB 1.1 devices to an

available USB port on the front of

the DUB-104.

B. Plug the USB type A dongle

(found on the bottom of the

DUB-104) into an available

USB 2.0 port on your computer

(or a USB 1.1 port if you don’t

have USB 2.0).

LED indicator

• The Power LED indicator is blue and lights up when the DUB-H4 is powered on by

using the external power adapter or by running on power supplied from the

computer (bus powered).

• If a port becomes overloaded, a “current exceeded” event will take place. The LED

will go off and the message “USB HUB Current Limit Exceeded” appears on the

monitor. Reset the DUB-104 by disconnecting the power adapter (if used) or

disconnecting the dongle from the PC for 5 seconds and then powering it back on

by connecting the AC power adapter or reconnecting the dongle to the PC.

Tips

• When connecting USB cables between USB devices and the DUB-104, make sure

that the cables are connected securely.

• Remember that when connecting USB 1.1 devices to a USB 2.0 hub or host

adapter, the USB 1.1 device will not work at USB 2.0 speeds.

• The DUB-104 does not have an on/off switch. It is always on once the external

power adapter has been plugged into a power source or the dongle has been

connected to a PC’s USB port.

• Connecting USB 1.1 devices to the DUB-104 may cause all USB devices

connected to the hub to work at USB 1.1 speed. To ensure 480Mbps throughput for

your USB 2.0 devices, don’t connect USB 1.1 and USB 2.0 devices to the hub at

the same time.

• D-Link recommends that while using a USB device that includes an AC power

adapter, that you use the power adapter to ensure proper power and current supply

to that device.

• Please remember to unplug devices properly to ensure that no data loss or

corruption takes place with your operating system.

Power LED:

Blue = Power is On

Off= Power is Off

Table of contents

Other D-Link Switch manuals

D-Link

D-Link DGS-1248T - Switch User manual

D-Link

D-Link DES-1218 User manual

D-Link

D-Link DGS-1008MP User manual

D-Link

D-Link DKVM-16 - KVM Switch User manual

D-Link

D-Link DWS-3160-24TC Manual

D-Link

D-Link DGS-1026MP User manual

D-Link

D-Link DGS-1100-10MP User manual

D-Link

D-Link DE-1824EI User manual

D-Link

D-Link DIS-100G-10S User manual

D-Link

D-Link DGS-3024 User manual

D-Link

D-Link DES-3010PA - Switch User manual

D-Link

D-Link DKVM-440 User manual

D-Link

D-Link DES-1024D User manual

D-Link

D-Link DGS-6600-48T Instruction Manual

D-Link

D-Link DGS-1016D - Switch User manual

D-Link

D-Link DES-1226R User manual

D-Link

D-Link 55443 User manual

D-Link

D-Link DGS-F1010P-E User manual

D-Link

D-Link DGS-1005D - Switch User manual

D-Link

D-Link DGS-3000-28XMP User manual

D-Link

D-Link DGS-3024 User manual

D-Link

D-Link DGS-1210/ME series User manual

D-Link

D-Link DUB-H7 - Hub - USB User manual

D-Link

D-Link DES-1024D User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Getting started guide