D-Link DGS-1016D - Switch User manual

16 / 24-PORT GIGABIT DESKTOP SWITCH

DGS-1016D/DGS-1024D

Quick Installation Guide+

Installations-Anleitung+

Guide d’installation+

Guía de instalación+

Guida di Installazione+

Installatiehandleiding+

Instrukcja instalacji+

Instalační příručka+

Telepítési Segédlet+

Installasjonsveiledning+

Installationsvejledning+

Asennusopas+

Installationsguide+

Guia de Instalação+

Οδηγός Γρήγορης Εγκατάστασης το+

Vodič za brzu instalaciju+

Kratka navodila za namestitev+

Ghid de instalare rapidă+

Quick Installation Guide

DGS-1016D / DGS-1024D

16 / 24-Port Gigabit Desktop Switch

Check Your Package Contents

These are the items included with your DGS-1016D / DGS-1024D purchase:

Notice Before Setup the DGS-1016D / DGS-1024D

The setup of the Switch can be performed using the following steps:

A. Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical

Specifications for the acceptable operation temperature and humidity ranges.

B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct

sunlight.

C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.

D. Visually inspect the power cable and ensure that it is firmly inserted into a suitable power outlet.

Installation

Desktop or Shelf Installation Rack Installation

When installing the Switch on a

desktop or shelf, the rubber feet

included with the device must be first

attached. Attach these cushioning feet

on the bottom at each corner of the

device. Allow enough ventilation space

between the device and the objects

around it.

The Switch can be mounted in an EIA standard size, 19-inch

rack, which can be placed in a wiring closet with other

equipment. To install, attach the mounting brackets on the

switch’s front panel (one on each side) and secure them with

the screws provided.

Then, use the screws provided with the equipment rack to

mount the Switch in the rack.

DGS-1016D /

DGS-1024D

Quick Installation

Guide

CD-ROM

with Product document

Power Cord Rack-mount

bracket

Connecting the DGS-1016D / DGS-1024D Gigabit Ethernet

Switch to Your Network

DGS-1016D DGS-1024D

A. Power

The Switch can be used with AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch’s

power supply will adjust to the local power source automatically and may be turned on

without having any or all LAN segment cables connected.

B. Gigabit Ethernet Ports

These ports support network speeds of 10Mbps, 100Mbps or 1000Mbps, and can operate in

half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX

crossover detection, which gives the Switch true, “plug and play” capabilities. Just connect

any network cable between the Switch and the device, and The Switch will automatically

detect the settings of the device and adjust itself accordingly.

LED Indicators

DGS-1016D DGS-1024D

The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential problem

with the switch, connection or attached devices.

A. Power

This lights green while the Switch is receiving power.

B. Link/Act/Speed

When connected to a 1000Mbps device, this LED indicator light is green when the port is

connected to a device and will blink as data is transmitted or received.

When connected to a 10/100Mbps device, this LED indicator light is amber when the port is

connected to a device and will blink as data is transmitted or received.

C. Cable Diagnostics (during boot up only)

Open or short circuit Link/Act/Speed LED light amber.

Technical Support

United Kingdom (Mon-Fri)

Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)

Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am –05.30pm)

(BT 10ppm, other carriers may vary.)

Ireland (Mon-Fri)

All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)

€0.05ppm peak, €0.045ppm off peak Times

Internet

http://www.dlink.co.uk

ftp://ftp.dlink.co.uk

Other manuals for DGS-1016D - Switch

This manual suits for next models

Table of contents

Other D-Link Switch manuals

D-Link

D-Link Web Smart Switch DGS-1210-16 User manual

D-Link

D-Link DGS-3308TG User manual

D-Link

D-Link DUB-H7 - Hub - USB User manual

D-Link

D-Link DGS-1210-52/FL User manual

D-Link

D-Link xStack DES-3800 Series User manual

D-Link

D-Link mydlink DCH-G022 User manual

D-Link

D-Link Dis-200G Series User manual

D-Link

D-Link xStack DGS-3620 Series User manual

D-Link

D-Link DAS-3636 User manual

D-Link

D-Link DWS-3160-24TC User manual

D-Link

D-Link DGS-1510-28XMP User manual

D-Link

D-Link DGS-1008D - Switch User manual

D-Link

D-Link Web Smart DES-1210-52 User manual

D-Link

D-Link DI-707 User manual

D-Link

D-Link DGS-1008P User manual

D-Link

D-Link Web Smart Switch DGS-1210-16 User manual

D-Link

D-Link DGS-1016A User manual

D-Link

D-Link DGS-1005D - Switch User manual

D-Link

D-Link xStack DGS-3612G series User manual

D-Link

D-Link EasySmart DGS-1100-08P User manual

D-Link

D-Link DGS-1005D - Switch User manual

D-Link

D-Link DFE-908x User manual

D-Link

D-Link DGS-1210/ME series User manual

D-Link

D-Link DGS-1005D - Switch User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Getting started guide