D-Link Express Ethernetwork DI-704P User manual

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with

other computers, you must have an Ethernet-based Cable/DSL modem with an

established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for

configuring the DI-704P router. The DI-704P Router acts as a DHCP server and

will assign all the necessary IP address information on your network. See

Appendix at the end of this Quick Installation Guide or the Manual on the

CD-ROM for setting each network adapter to automatically obtain an IP

address.

Check Your Package Contents

These are the items included with your DI-704P purchase:

holders. Software and specifications subject to change without notice. DI-604.05082002

This product can be set up using any current

web browser, i.e., Internet Explorer 5x,

Netscape Navigator 4x.

DI-704P

Express EtherNetwork™

Broadband Route

• DI-704P Ethernet Broadband Router

• CD-ROM (containing Manual and Warranty)

• Ethernet (CAT5 UTP/Straight-Through) Cable

• 5V DC, 2A Power Adapter

Using a power

supply with a

different voltage rating

will damage and void

the warranty for this

product.

If an

of the above items are missin

lease contact

our reseller.

Connecting The DI-704P Broadband

Router To Your Network

A. First, connect the power adapter to the receptor at the side panel of

the DI-704P and then plug the other end of the power adapter to a

wall outlet or power strip. The Power LED will turn ON to indicate

proper operation.

B. Insert one end of an Ethernet cable to the WAN port on the back

panel of the DI-704P and the other end to the Ethernet port located on

your Cable or DSL modem. The WAN LED light will illuminate to

indicate proper connection.

C. Insert one end of an Ethernet cable to LAN port 1 on the back panel

of the DI-704P and the other end to the Ethernet port on the network

adapter in the computer you will use to configure the DI-704P. The

LED light for LAN Port 1 will illuminate to indicate proper connection.

(Note: Some computers already have network adapters pre-installed.)

D. The parallel port on the DI-704P is used to connect printers only.

Connect one end of the printer cable to your printer and the other end

to the DI-704P.

Restart Your Computer

C.LAN Ports

These are the

connections for

Ethernet cables to

your Ethernet-

enabled com

uters

A.Receptor for

Power Adapter

is located on the

side.

Reset Button

Pressing this button

restores the router

to its original factory

default settings.

B.WAN Port

This is the

connection for the

Ethernet Cable to

the Ethernet Port on

the Cable or DSL

Modem.

D.Printer Port

You can connect a

Printer to the

Parallel Port here.

Connecting Additional Computers To The

DI-704P Broadband Router

Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect

your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet

LAN ports on the back panel of the DI-704P.

When you have completed the steps in this Quick Installation Guide, your

connected network should look similar to this:

LAN Port LEDs. Each of the

LAN ports on the back of the

DI-704P have a corresponding

LED light on the front panel of

the unit. When a proper

connection has been made to

a computer that is ON, the

LED on the front panel should

illuminate.

Cable or DSL

Modem

DI-704P Ethernet

Broadband Router

Computers connected

to the LAN Ports

Connect a printer

to the parallel port

For optional printer setup, please refer to

the DI-704P’s Manual

Using The Setup Wizard

The logon pop-up

screen will appear.

Once you have

logged in, the

Home screen

will appear.

Open your Web

browser and type

“http://192.168.0.1” into

the URL address box.

Then press the Enter or

Return key.

Type “admin” for the

username and leave the

password field blank.

Click OK

DI-704P

Click Run Wizard

You will see the following

screens.

Set password.You have the option to establish a new admin password for the DI-704P

Click Next

The Setup Wizard (continued)

Select the type of Internet connection for your router.

If you selected Dynamic

IP Address, this screen

will appear:

If you are unsure of which setting to

select, please contact your Internet

Service Provider.

What is a MAC address? Each

network adapter has a discrete

Media Access Control (MAC)

address. Note that some computers

and peripherals may already include

built-in network adapters.

Click Next

Click the “Clone MAC

Address” button to

automatically copy the MAC

address of the network adapter

in your computer. You can also

manually type in the MAC

address.

Select one of

these settings

If your ISP requires a

Static IP Address, and

this option is selected,

then this screen will

appear:

If your ISP uses PPPoE

(Point-to-Point Protocol

over Ethernet) and this

option is selected, then

this screen will appear:

Enter in the username

and password provided

to you by your ISP.

Do not use

the numbers

displayed in these

fields. They are only

shown as an example.

Click Next

Enter the IP address

information originally

provided to you by your ISP.

You will need to complete all

the required fields.

Click Next

Your Setup is Complete!

Test Your Internet Connection

Relaunch your Web

browser (i.e., Internet

Explorer or Netscape

Navigator), to link to your

favorite Web site to test

your Internet connection.

For additional settings or

information, refer to the

Advanced, Tools, or

Status tabs on the web-

management

interface; or to the

manual located on the

CD-ROM.

Click the

to Exit

Click Restart

For optional Printer setup please refer to

the DI-704P’s Manual.

APPENDIX

To connect to the network, make sure

the network adapter in your computer

is configured properly. Here’s how to

configure the network adapter to obtain

an IP address automatically for the

DI-704P Broadband Router.

For Microsoft Windows XP:

Go to Start > right click on

My Network Places >

select Properties > Double-click on

the Network Connection associated

with the Ethernet adapter (i.e.,

D-Link DFE-530TX+).

Click Internet Protocol (TCP/IP)

Click Properties

Select Obtain an IP address

automatically

Click OK

Restart your

computer

For Apple Macintosh OS X:

Go to the Apple Menu

and Select System

Preferences.

The IP address information,

the Subnet Mask, the Router’s

IP address and the Ethernet

adapter address will appear.

Click on

Network

Select Built-in

Ethernet in the Show

pull-down menu

Select Using DHCP

in the Configure pull-

down menu

Click on

Apply Now

Other manuals for Express Ethernetwork DI-704P

Table of contents

Other D-Link Network Router manuals

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview