D-Link DVG-N5402G/ACF User manual

Quick Installation Guide

DVG-N5402G/ACF

Wireless AC1200 Dual Band Gigabit Router

ith Fiber WAN Port, 3G/LTE Support, 2 FXS

Ports, 1 PSTN (lifeline) Port, and USB Port

DVG-N5402G/ACF Quick Installation Guide

BEFO E YOU BEGIN

Delivery Package

•Router DVG-N5402G/ACF

•Power adapter DC 12V/2A

•Ethernet cab e (CAT 5E)

•Two RJ-11 te ephone cab es

•“Quick Installation Guide” (brochure).

If any of the items are missing, p ease contact your rese er.

The “User Manual” and “Quick Installation Guide” documents are avai ab e

on D-Link website (see www.d ink.ru).

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

DVG-N5402G/ACF Quick Installation Guide

Default Settings

IP address of wireless router 192.168.8.254

Username (login) admin

Password admin

Name of wireless network

(SSID)

2.4GHz DVG-N5402G

5GHz DVG-N5402G-5G

Network key (PSK)

see WPS PIN on the

barcode abe on the

bottom pane of the

device

Router DVG-N5402G/ACF with defau t settings cannot connect to the

Internet. To get started, p ease set your own password for access to the

web-based interface and change the WLAN name (SSID); then, if

needed, configure other settings recommended by your ISP.

DVG-N5402G/ACF Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router:

◦App e Safari 5 and ater

◦Goog e Chrome 10 and ater

◦Microsoft Internet Exp orer 9 and ater

◦Microsoft Edge 20.10240 and ater

◦Mozi a Firefox 10 and ater

◦Opera 10 and ater.

•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.

•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wire ess network.

•SFP transceiver to connect to a fiber optic ine.

•Ana og phone.

•A USB modem (when it is necessary to connect to the Internet via mobi e

operators' networks)1.

Your USB modem shou d be equipped with an active identification

card (SIM or R-UIM) of your operator.

Some operators require subscribers to activate their USB modems prior

to using them. P ease, refer to connection guide ines provided by your

operator when conc uding the agreement or p aced on its website.

For LTE or CDMA USB modems, it is required to disab e the PIN code

check on the identification card prior to connecting the USB modem to

the router.

1 Contact your operator to get information on the service coverage and fees.

DVG-N5402G/ACF Quick Installation Guide

CONNECTING TO PC

PC with Ethernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet cab e between any of LAN ports ocated on the back

pane of the router and the Ethernet port of your PC.

3. To connect via USB modem: connect your USB modem to the USB port2

ocated on the back pane of the router.

!If you need to connect or change a USB modem to another one when

the router is powered on, power off the router, connect the modem to

the USB port, and power on the router.

4. To connect the device to a fiber optic line: connect your SFP transceiver

to the SFP port, then connect the fiber optic cab e to the SFP transceiver.

5. To connect the device to an Ethernet line: in the web-based interface of

the router, se ect the router's LAN port that wi be used as the WAN port

and create an Ethernet WAN connection. Then connect an Ethernet cab e

between an avai ab e Ethernet port of the router and the Ethernet ine.

!P ease connect the router to the ISP's Ethernet ine on y after setting the

WAN port and creating the Internet connection.

6. Connect the power cord to the power connector port on the back pane of

the router, then p ug the power adapter into an e ectrica out et or power

strip.

7. Turn on the router by pressing the ON/OFF button on its back pane .

8. Turn on your PC and wait unti your operating system is comp ete y

oaded.

Now you shou d configure your PC to obtain an IP address automatica y (as

DHCP c ient).

2 It is recommended to use a USB extension cab e to connect a USB modem to the

router.

DVG-N5402G/ACF Quick Installation Guide

Obtaining P Address Automatically

in OS Windows XP

1. C ick the Start button and proceed to the Control Panel > Network

and Internet Connections > Network Connections window.

2. In the Network Connections window, right-c ick the re evant Local

Area Connection icon and se ect the Properties ine in the menu

disp ayed.

3. In the Local Area Connection Properties window, on the General

tab, se ect the Internet Protocol (TCP/IP) ine. C ick the Properties

button.

DVG-N5402G/ACF Quick Installation Guide

4. Se ect the Obtain an IP address automatically and Obtain DNS

server address automatically radio buttons. C ick the OK button.

5. C ick the ОК button in the connection properties window.

Now your computer is configured to obtain an IP address automatica y.

DVG-N5402G/ACF Quick Installation Guide

Obtaining P Address Automatically

in OS Windows 7

1. C ick the Start button and proceed to the Control Panel window.

2. Se ect the Network and Sharing Center section. (If the Contro Pane

has the category view (the Category va ue is se ected from the View by

drop-down ist in the top right corner of the window), choose the

View network status and tasks ine under the Network and

Internet section.)

3. In the menu ocated on the eft part of the window, se ect the Change

adapter settings ine.

4. In the opened window, right-c ick the re evant Local Area Connection

icon and se ect the Properties ine in the menu disp ayed.

5. In the Local Area Connection Properties window, on the

Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)

ine. C ick the Properties button.

DVG-N5402G/ACF Quick Installation Guide

6. Se ect the Obtain an IP address automatically and Obtain DNS

server address automatically radio buttons. C ick the OK button.

7. C ick the OK button in the connection properties window.

Now your computer is configured to obtain an IP address automatica y.

DVG-N5402G/ACF Quick Installation Guide

PC with Wi-Fi Adapter

1. To connect via USB modem: connect your USB modem to the USB

port3 ocated on the back pane of the router.

!If you need to connect or change a USB modem to another one when

the router is powered on, power off the router, connect the modem to

the USB port, and power on the router.

2. To connect the device to a fiber optic line: connect your SFP

transceiver to the SFP port, then connect the fiber optic cab e to the

SFP transceiver.

3. To connect the device to an Ethernet line: in the web-based interface

of the router, se ect the router's LAN port that wi be used as the WAN

port and create an Ethernet WAN connection. Then connect an

Ethernet cab e between an avai ab e Ethernet port of the router and the

Ethernet ine.

!P ease connect the router to the ISP's Ethernet ine on y after setting the

WAN port and creating the Internet connection.

4. Connect the power cord to the power connector port on the back pane

of the router, then p ug the power adapter into an e ectrica out et or

power strip.

5. Turn on the router by pressing the ON/OFF button on its back pane .

6. Turn on your PC and wait unti your operating system is comp ete y

oaded.

7. Turn on your Wi-Fi adapter. As a ru e, modern notebooks with bui t-in

wire ess NICs are equipped with a button or switch that turns on/off

the wire ess adapter (refer to your PC documents). If your PC is

equipped with a p uggab e wire ess NIC, insta the software provided

with your Wi-Fi adapter.

Now you shou d configure your Wi-Fi adapter.

3 It is recommended to use a USB extension cab e to connect a USB modem to the

router.

Other manuals for DVG-N5402G/ACF

Table of contents

Other D-Link Network Router manuals

D-Link

D-Link DIR-806A User manual

D-Link

D-Link DSL-2640U User manual

D-Link

D-Link DVA-5582 User manual

D-Link

D-Link DSL-500 User manual

D-Link

D-Link DIR-895L User manual

D-Link

D-Link DIR-841 User manual

D-Link

D-Link SharePort DIR-825 User manual

D-Link

D-Link DSL-604+ User manual

D-Link

D-Link DI-LB604 - Load Balancing Router User manual

D-Link

D-Link DIR-625 Router User manual

D-Link

D-Link Air Xpert DI-774 User manual

D-Link

D-Link DIR-410 User manual

D-Link

D-Link DSR-500 User manual

D-Link

D-Link Air DWL-810 User manual

D-Link

D-Link DWR-961 User manual

D-Link

D-Link DWR-921 User manual

D-Link

D-Link DWR-512 User manual

D-Link

D-Link DSL-3580L Series User manual

D-Link

D-Link EXO DIR-1960 User manual

D-Link

D-Link DWR-922 User manual

D-Link

D-Link xStack DES-3200 Series User manual

D-Link

D-Link DI-LB60 User manual

D-Link

D-Link SharePort DIR-825 User manual

D-Link

D-Link DGS-3000 series Manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview