D-Link DSL-G225 User manual

How to setup the DSL-G225

in Bridge Mode

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 2of 11

This guide is for DSL-G225 with firmware ver. 1.04.

Before proceeding with this setup please set your computer temporarily with a static IP address from

192.168.1.x range (e.g. 192.168.1.99):

Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D-

Link modem in the address bar: http://192.168.1.1.

When prompted, type in the Password. If you have not changed the password for the modem administration, the

factory password is “admin”.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 3of 11

There are two ways to setup your modem in Bridge Mode: using the Setup Wizard and using Manual

Configuration.

Setup using the Setup Wizard

Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network.

Un-check the “Enable DHCP Server”option.

Click on Save/Apply.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 4of 11

Step 2. Go to SETUP > Wizard > click on the “Setup Wizard” button.

Follow the steps in the Setup Wizard.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 5of 11

Choose ADSL or VDSL, depending on the type of technology used for your Internet connection.

Set Protocol to “Bridge”.

It is recommended to disable the modem’s Wi-Fi:

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 6of 11

Click on “Save/Apply” to finish the Setup Wizard. The setup is complete.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 7of 11

Manual Setup

Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network.

Un-check the “Enable DHCP Server”option.

Click on Save/Apply.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 8of 11

Step 2. Go to SETUP > Internet Setup.

If there are any existing profiles listed in the WAN Setup table, delete them.

Choose ADSL or VDSL, depending on the type of technology used for your Internet connection.

Click on “Add”.

Set Protocol to “Bridging” and click on Next.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 9of 11

Click on “Apply” to finish the setup. The modem setup is complete.

D-Link Technical Support –How to setup DSL-G225 in Bridge Mode Page 10 of 11

Please note that in Bridge Mode the DSL-G225 modem acts as a transparent device. If your Internet

provider requires PPPoE authentication or VLAN tagging, you need to enable these options on the device

connected to the LAN port of the DSL-G225 modem.

After successful VDSL sync

Other manuals for DSL-G225

3

Table of contents

Other D-Link Network Router manuals

D-Link

D-Link DRO-250i User manual

D-Link

D-Link DSL-526B User manual

D-Link

D-Link DIR-456U User manual

D-Link

D-Link DSL-514 User manual

D-Link

D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... User manual

D-Link

D-Link DSL-2730B User manual

D-Link

D-Link DI-804 User manual

D-Link

D-Link DIR-809 User manual

D-Link

D-Link DSL-2540U User manual

D-Link

D-Link DIR-1750 User manual

D-Link

D-Link DSL-2540B - ADSL2/2+ Modem With EN Router User manual

D-Link

D-Link DSL-500 User manual

D-Link

D-Link DIR-608 User manual

D-Link

D-Link DHP-600AV User manual

D-Link

D-Link SharePort DIR-825 User manual

D-Link

D-Link DIR-605L User manual

D-Link

D-Link DIR-518L User manual

D-Link

D-Link DIR-510L User manual

D-Link

D-Link DIR-855L User manual

D-Link

D-Link DSL-1501G User manual

D-Link

D-Link DGS-3024 User manual

D-Link

D-Link DWR-161 User manual

D-Link

D-Link xStack DGS-3324SRi User manual

D-Link

D-Link DVG-5008S User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview