D-Link DSL-564T User manual
1
BeforeYouBegin
Makesure you have allthenecessaryinformation andequipmentonhandbefore beginning
the installation.
CheckYourPackage Contents
This product can be set
up using any currentweb
browser, i.e., Internet
Explorer 6 or Netscape
Navigator 6.2.3.
DSL
-
5
6
4T
ADSLRouter
2004 D-Link Systems, Inc. All rights reserved. Trademarks orregistered trademarks arethe propertyoftheir respective holders. Software and
specifications subject to change without notice.
DSL-564T ADSL Router
CD-ROM(containingManual)
Ethernet (CAT5 UTP) Cable
Telephone Cable
Power Adapter
If anyofthe above itemsare missing, please contactyour reseller
Using a power supply
with a differentvoltage
rating will damage and void
thewarranty for this product.
ENGLISH
2
Connecting the Routerto YourComputer
A. First, connectthe power adapterto the receptor at the back panelofthe
DSL-564Tand thenplugtheother endof the power adapter to awall outletor
power strip.The Power LED will turn ON toindicate proper operation.
B. Insert one endof thecableinto any Ethernet port on the back panelofthe
DSL-564Tand the otherend ofthe cable toan Ethernet Adapter or availableEthernet
port on your computer.
C. Insert one endof the Telephonecable into the ADSLport ontherear panel ofthe
R
outer and insertthe otherend intothewallsocket.Ifyouneedto install a lowpass filter,
followtheinstructions of your ISP.
ADSL port -
connect to
ADSL line
Ethernetports -
connectto
Ethernet cable
Factory
Reset
button
Power input-
connect to power
adapter
3
Configuring the Router
To useyour Web browserto access theweb pages used tosetup the Router,your computer
must be configured to Obtain an IPaddressautomatically”,that is, you must change the
IP network settings ofyour computer so that it isa DHCPClient. If you areusing Windows
XP and donot knowhowto change yournetwork settings, skipahead to Appendix and read
the instructions provided. You mayalso readtheUser Manual for instructions on changing IP
settingsfor computers running Windowsoperating systems.
Openyour Web browser and type
http://192.168.1.1”intotheURLaddress
box.Then presstheEnter or Return key.
The Login page appears.
Type admin”for the
Login Name and
admin”in the
Password field.
Click Login
ENGLISH
4
Configuring the Router(continued)
Once you haveloggedin,the Home screenwillappear.Click the Setup tabto go to the Setup
menuandconfigure the Router.
Click Setup
5
Configuring the Router(continued)
In the Setup menu, click the Connection 1 button togo totheconfigurationmenu for the
Internetconnection.
Click Connection 1
ENGLISH
6
Configuring the Router(continued)
In the Connection 1 menu, type the Username and Password used toverifytheidentity of
your ISPaccount. It maybe necessary to change the PPPencapsulation Type usedfor your
connection. You mayalso need tochange the VPI or VCI value. Your ISPwillgive these
settingsto youiftheyneed to be changed. Click the Apply buttonwhen you have entered all
the information. Tosavethe changes made toConnection 1, click the Tools tab and followthe
instructions onthenextpage.
A. Type the Username
and Password used for
your account.
D. Click Tools when
you have applied the
newsettings.
C. Click the Apply button
after youhave entered the
accountinformation.
B. Check the PPP
encapsulation Type,
VPI: and VCI: - if these
valuesare not correct,
change these according
to the instructions of
your ISP.
7
Configuring the Router(continued)
Nowsave the changesyou havejust made. TheSave function is accessed fromtheSystem
Commandsmenu. Clickthe System Commands button to viewthatmenu.
Click System Commands to
viewthemenu used to save
changes.
ENGLISH
8
Configuring the Router(continued)
To savethenewsettings,click the Save All buttonin the System Commands menu. Aftera
fewseconds, the changes will besaved. The Router will automaticallyestablish the Internet
connection aftera fewmore seconds.
Waitafewsecondsfor the Internetconnection tobe establishedandproceed toaccess the
Internetviayour webbrowser.
Click Save All to save
the newsettings.
9
Appendix
For additional settingsorinformation, referto the Advanced,Tools, or Status tabs on the
web-management interface;or to the manual located ontheCD-ROM.
Configuring IPSettings in Windows XP
Usethefollowingstepsto configure acomputer running Windows XPto be aDHCPclient.
1. From the Start menuon your desktop, go to Settings,then click on Network
Connections.
2. In the Network Connections window,right-click on LAN (LocalAreaConnection),
thenclick Properties.
Right-click on the Local Area
Connection icon and Select the
Properties option from the pull-
down
menu.
ENGLISH
10
3. In the General tabofthe Local Area Connection Properties menu, highlight Internet
Protocol(TCP/IP) under This connectionuses the following items:”byclicking onit
once. Click onthe Properties button.
4. Select Obtain an IPaddressautomatically”byclickingoncein the circle.Click the
OK button.
Your computer isnowreadytouse the Router’s DHCPserver.
Click Properties
Select Obtain an IPaddress
automatically in the Internet
Protocol (TCP/IP) Propertieswindow
Other manuals for DSL-564T
1
Table of contents
Languages:
Other D-Link Network Router manuals
D-Link
D-Link DWR-953 User manual
D-Link
D-Link DSR-150 User manual
D-Link
D-Link DSL-504T User manual
D-Link
D-Link EBR-2310 - EN Broadband Router User manual
D-Link
D-Link DIR-615 - Wireless N Router User manual
D-Link
D-Link DWR-926 User manual
D-Link
D-Link DVX-7090 User manual
D-Link
D-Link DSL-2750U User manual
D-Link
D-Link DES-1008P User manual
D-Link
D-Link DIR-300 - Wireless G Router User manual
D-Link
D-Link DIR-506L User manual
D-Link
D-Link SharePort DIR-825 User manual
D-Link
D-Link DSL-2544N User manual
D-Link
D-Link DSL-2745 User manual
D-Link
D-Link DSL-514 User manual
D-Link
D-Link Cobra DSL-5300 User manual
D-Link
D-Link DSL-3788 User manual
D-Link
D-Link DGS-3224SR User manual
D-Link
D-Link DWR-712 User manual
D-Link
D-Link DIR-853/EE User manual
