D-Link DSL-2770L User manual
QUICK
INSTALLATION
GUIDE
2
ENGLISH
CONTENTS OF
PACKAGING
INSTALLATION CD
INCLUDES SET-UP WIZARD & TECHNICAL MANUALS
WIrELESS N300 GIGAbIT CLOUD ADSL2+ MODEM rOUTEr
DSL-2770L
POWEr ADAPTEr
ADAPTER
rJ-11 PHONE CAbLE
ETHErNET CAbLE (rJ-45 CAbLE)
CONNECT THE ROUTER TO YOUR PC DURING SET-UP
If any of these items are missing from your packaging contact
your reseller
ADSL2+ MICrOFILTEr/SPLITTEr
3
ENGLISH
PrODUCT
SET-UP
English
SET-UP WIZArD CD
The CD contains all of the instructions required to set-up the
DSL-2770L
INSErT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DSL-2770L yet)
SET-UP WIZArD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DSL-2770L
After connecting cables provided in the box, please open a browser to congure DSL-2770L
manually by entering in below information. Upon establishing the internet connection, you are
able to register the DSL-2770L on the mydlinkTM portal with your newly created or existing
mydlinkTM account.
Simply open a browser window and enter the IP address in the browser address eld:
IP ADDRESS: http://192.168.1.1
USERNAME: admin
PASSWORD: admin
4
ENGLISH
TrOUbLESHOOTING
1. HOW DO I CONFIGUrE MY DSL-2770L rOUTEr WITHOUT THE CD, Or CHECK MY
WIrELESS NETWOrK NAME (SSID) AND WIrELESS ENCrYPTION KEY?
- Connect your PC to the router using an Ethernet cable.
- Open a web browser and enter the address http://192.168.1.1
- The default username is “admin”. The default password is “admin”.
- If you have changed the password and can not remember it, you will need to reset the router to
set the password back to “admin”.
2. HOW DO I rESET MY DSL-2770L rOUTEr TO FACTOrY DEFAULT SETTINGS?
- Ensure the router is powered on.
- Press and hold the reset button on the rear of the device for 10 seconds.
Note: Resetting the router to factory default will erase the current conguration settings. To re-
congure your settings, log into the router as outlined in question 1, then run the Setup Wizard.
3. HOW DO I ADD A NEW WIrELESS CLIENT Or PC IF I HAVE FOrGOTTEN MY
WIrELESS NETWOrK NAME (SSID) Or WIrELESS ENCrYPTION KEY?
- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless Network Name (SSID) and encryption key.
- Use the web based user interface (as described in question 1 above) to check or choose your
wireless settings.
- Make sure you write down these settings so that you can enter them into each wirelessly
connected PC. You will nd a dedicated area on the back of this document, this important
information for future use.
4. WHY CAN I NOT GET AN INTErNET CONNECTION?
For ADSL users please contact your ISP to make sure the service has been enabled/connected
by your ISP and that your ISP username and password is correct.
5
NOTES
6
NOTES
7
NOTES
3-YEAR LIMITED WARRANTY
AUSTRALIA
Technical Support:
http://support.dlink.com.au
1300 766 868
NEW ZEALAND
Technical Support:
http://support.dlink.co.nz
0800 900 900
Table of contents
Other D-Link Network Router manuals
D-Link
D-Link DSL-2750U User manual
D-Link
D-Link DSL-2600U User manual
D-Link
D-Link DIR-878 User manual
D-Link
D-Link DSL-2740B User manual
D-Link
D-Link DI-304 User manual
D-Link
D-Link DIR-602L User manual
D-Link
D-Link DSL-514 User manual
D-Link
D-Link DES-1228/ME User manual
D-Link
D-Link Express Ethernetwork DI-704P User manual
D-Link
D-Link DVG-5402G User manual
D-Link
D-Link Amplifi DIR-657 User manual
D-Link
D-Link DSL-564T User manual
D-Link
D-Link DES-6000 Series User manual
D-Link
D-Link Amplifi DIR-645 User manual
D-Link
D-Link AirPlus DWL-G730AP User manual
D-Link
D-Link DIR-605 User manual
D-Link
D-Link DIR-300 - Wireless G Router User manual
D-Link
D-Link DIR-815 User manual
D-Link
D-Link DIR-300 - Wireless G Router User manual
D-Link
D-Link DIR-655 - Xtreme N Gigabit Router Wireless User manual
