D-Link DAP-1360U User manual
Quick Installation Guide
DAP-1360U
Wireless N300 Access Point & Router
DAP-1360U Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Access point DAP-1360U
•Power adapter DC 12V/0.5A
•Ethernet cab e
•Two detachab e antennas
•“Quick Installation Guide” (brochure).
If any of the items are missing, p ease contact your rese er.
The “User Manual” and “Quick Installation Guide” documents are avai ab e
on D-Link website (see www.d ink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address of access point 192.168.0.50
Username (login) admin
Password admin
ame of wireless network (SSID) DAP-1360
etwork key (PSK)
see WPS PIN on the
barcode abe on the
bottom pane of the
device
2
DAP-1360U Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the access point:
◦App e Safari 8 and ater
◦Goog e Chrome 48 and ater
◦Microsoft Internet Exp orer 10 and ater
◦Microsoft Edge 20.10240 and ater
◦Mozi a Firefox 44 and ater
◦Opera 35 and ater.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the access point.
•An 802.11b, g, or n Wi-Fi adapter to create a wire ess network.
3
DAP-1360U Quick Installation Guide
CO ECTI G TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cab e between any of LAN ports ocated on the back
pane of the access point and the Ethernet port of your PC.
2. Connect the power cord to the power connector port on the back pane of
the access point, then p ug the power adapter into an e ectrica out et or
power strip.
3. Turn on the access point by pressing the ON/OFF button on its back
pane .
Now you need to configure an IP address for the Ethernet adapter of your PC.
4
DAP-1360U Quick Installation Guide
Configuring IP Address in S Windows 7
1. C ick the Start button and proceed to the Control Panel window.
2. Se ect the etwork and Sharing Center section. (If the Contro Pane
has the category view (the Category va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
network status and tasks ine under the etwork and Internet
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapter settings ine.
4. In the opened window, right-c ick the re evant Local Area Connection
icon and se ect the Properties ine in the menu disp ayed.
5. In the Local Area Connection Properties window, on the
etworking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
5
DAP-1360U Quick Installation Guide
6. Se ect the Use the following IP address radio button and enter the
va ue 192.168.0.51 in the IP address fie d. The Subnet mask
fie d wi be fi ed in automatica y. C ick the OK button.
7. C ick the OK button in the connection properties window.
Now you can connect to the web-based interface of DAP-1360U for
configuring a needed parameters. To gain access to an externa network (to
the Internet), you a so need to specify the defau t gateway and the addresses of
DNS servers.
6
DAP-1360U Quick Installation Guide
PC with Wi-Fi Adapter
1. Attach the antennas from the de ivery package. To do this, remove the
antennas from their wrapper, attach them to the re evant connectors on the
back pane of the access point, and then screw the antennas in a c ockwise
direction to the back pane . Position the antennas upward at their
connecting joints. This wi ensure optima operation of your wire ess
network.
2. Connect the power cord to the power connector port on the back pane of
the access point, then p ug the power adapter into an e ectrica out et or
power strip.
3. Turn on the access point by pressing the ON/OFF button on its back
pane .
4. Make sure that the Wi-Fi adapter of your PC is on. As a ru e, modern
notebooks with bui t-in wire ess NICs are equipped with a button or
switch that turns on/off the wire ess adapter (refer to your PC documents).
If your PC is equipped with a p uggab e wire ess NIC, insta the software
provided with your Wi-Fi adapter.
Now you shou d configure your Wi-Fi adapter.
7
DAP-1360U Quick Installation Guide
Configuring Wi-Fi Adapter in S Windows 7
1. C ick the Start button and proceed to the Control Panel window.
2. Se ect the etwork and Sharing Center section. (If the Contro Pane
has the category view (the Category va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
network status and tasks ine under the etwork and Internet
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapter settings ine.
4. In the opened window, right-c ick the re evant Wireless etwork
Connection icon. Make sure that your Wi-Fi adapter is on, then se ect
the Properties ine in the menu disp ayed.
5. In the Wireless etwork Connection Properties window, on the
etworking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
8
DAP-1360U Quick Installation Guide
6. Se ect the Use the following IP address radio button and enter the
va ue 192.168.0.51 in the IP address fie d. The Subnet mask
fie d wi be fi ed in automatica y. C ick the OK button.
7. C ick the OK button in the connection properties window.
8. To open the ist of avai ab e wire ess networks, se ect the icon of the
wire ess network connection and c ick the Connect To button or eft-
c ick the network icon in the notification area ocated on the right side of
the taskbar.
9
DAP-1360U Quick Installation Guide
9. In the opened window, in the ist of avai ab e wire ess networks, se ect the
wire ess network DAP-1360 and c ick the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the
barcode abe on the bottom pane of the device) in the Security key
fie d and c ick the OK button.
11. Wait for about 20-30 seconds. After the connection is estab ished, the
network icon wi be disp ayed as the signa eve sca e.
Now you can connect to the web-based interface of DAP-1360U for configuring
a needed parameters. To gain access to an externa network (to the Internet), you
a so need to specify the defau t gateway and the addresses of DNS servers.
!
If you perform initia configuration of the access point via Wi-Fi
connection, note that immediate y after changing the wire ess defau t
settings of the access point you wi need to reconfigure the wire ess
connection using the new y specified settings.
10
Other manuals for DAP-1360U
1
Table of contents
Other D-Link Network Router manuals
D-Link
D-Link DI-300 series Instruction Manual
D-Link
D-Link GO-DSL-N151 User manual
D-Link
D-Link DIR-859 User manual
D-Link
D-Link DIR-1950 User manual
D-Link
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... User manual
D-Link
D-Link DSL-2750U User manual
D-Link
D-Link DVX-7090 User manual
D-Link
D-Link DSL-500T User manual
D-Link
D-Link DES-1228P - Web Smart Switch User manual
D-Link
D-Link DIR-651 User manual
D-Link
D-Link DSL-504G User manual
D-Link
D-Link DSL-2750U User manual
D-Link
D-Link Express Ethernetwork DI-704P User manual
D-Link
D-Link DSL-3788 User manual
D-Link
D-Link DIR-859 User manual
D-Link
D-Link DSR-250N User manual
D-Link
D-Link DIR-822 User manual
D-Link
D-Link NetDefend DFL-260E User manual
D-Link
D-Link EAGLE PRO AI N300 Smart User manual
D-Link
D-Link DSL-2740U User manual
