Cypress CY3668 User manual

CY3668 WIRELESSUSB™-NL DEVELOPMENT KIT

QUICK START GUIDE

The CY3668 DVK consists of two development boards, two

WUSB-NL Radio modules, one enCoRe II module, two enCoRe V

modules, one MiniProg, two 12-V power adapters, one USB A/

Mini-B cable, one CD, and 10 jumper wires.

Note: When you receive the kit, ensure that the enCoRe V modules

are connected on the development boards.

• Insert the CY3668 kit CD into the computer’s CD drive.

• If the WirelessUSB-NL DVK installer application does not launch

automatically, launch it manually by clicking 'cyautorun.exe'.

•ClickInstall WirelessUSB NL DVK to install PSoC Designer,

PSoC Programmer, and WirelessUSB-NL DVK software.

Key instructions for programming Bridge and Keyboard

•Do not attach the WUSB-NL module to development boards.

•Do not attach any power source (AC-DC adapter or USB

cable) to development boards.

Setting up the Bridge

• Program one of the development boards with the Bridge firm-

ware that is located at <Install_Directory>\

Cypress\CY3668 DVK\1.0\Firmware\Bridge\

NL_Bridge_enCoReV\NL_Bridge_enCoReV\

NL_Bridge_enCoReV.hex. See the user guide for the program-

ming procedure.

Note: The default install directory is "C:\Program Files" or

"C:\Program Files (x86)"

• Attach the following wires from P7 to P10: P0_3 to S1, P0_0

to LED1, and P0_1 to LED2.

• Plug in the WUSB-NL module on the development board

• Connect the Bridge to the computer using the USB cable

If the LCD panel text is not visible, increase the LCD contrast by rotat-

ing the knob located below the LCD panel in clockwise direction.

Setting up the Keyboard

• Program the other development board with the keyboard

firmware located at <Install_Directory>\Cypress\ CY3668

DVK\1.0\ Firmware\ Keyboard\ NL_Keyboard_enCoReV\

NL_Keyboard_enCoReV\NL_Keyboard_enCoReV.hex. Use

the same procedure as for the Bridge.

• Attach the following wires from P7 to P10: P0_3 to S1, P0_4 to

S2, P0_5 to S3, P0_6 to S5, P0_0 to LED1, P0_1 to LED2, and

P0_2 to LED3.

• Plug in the WUSB-NL module on the development board.

• Power the keyboard using the 12-V power adapter.

Establish Wireless Link and Data Transfer

• Press and release S1 on the Bridge to change to Bind mode.

LED1 on the Bridge blinks to denote Bind mode. Press and

release S5 on the Keyboard to change to Bind mode; wait for 2

seconds. On successful binding, LED1 on the Bridge switches off

and the wireless link is now ready for data transfer

• On the Keyboard, press and release S1 for Num Lock, S2 for

Caps Lock, and S3 for Scroll Lock. The actions corresponding to

the pressed key are executed on the computer.

CY3668 WIRELESSUSB™-NL DEVELOPMENT KIT

QUICK START GUIDE

referenced herein are the properties of their respective owners. Doc.#: 001-76174 Rev. *D

http://www.cypress.com/go/CY3668

For the latest information about this kit, visit

CY3668 Development Board Details

* Refer to the user guide for details on example projects using the enCoRe II module.

Voltage

Regulator

LCDContrast

Potentiometer

LCD

Switches

LEDs

Output

VoltageLevel

Potentiometer

Logic

AnalyzerHeader

I2C

Header

ISSP

Header

Reset

Switch

enCoReII/enCoReV

ModuleInterface

SwitchtoselectenCoRe

IIorenCoReVfor

Programming

OCDConnector

MiniBUSB

Connector

WirelessUSB‐NL

RadioInterface

BreadboardArea

PowerSelection

Jumper

12‐VDCSupply

enCoRe II Module* WirelessUSB-NL Radio Module enCoRe V Module

Other Cypress Microcontroller manuals

Cypress

Cypress EZ-PD CY4502 User manual

Cypress

Cypress EZ-PD CY4502 User manual

Cypress

Cypress CY4607 HX2VL User manual

Cypress

Cypress EZ-USB AT2LP CY4615B User manual

Cypress

Cypress CY3652 User manual

Cypress

Cypress CY3642 User manual

Cypress

Cypress FR MB91460 Series Owner's manual

Cypress

Cypress PSoC User manual

Cypress

Cypress S6J3200 Series Instruction Manual

Cypress

Cypress Universal CapSense CY3280-22x45 User manual

Cypress

Cypress PSoC 5 FIRSTTOUCH CY8CKIT-014 User manual

Cypress

Cypress CY8CKIT-046 User manual

Cypress

Cypress CY8CKIT-147 Manual

Cypress

Cypress CY3641 User manual

Cypress

Cypress PSOC CY8CKIT-146 User manual

Cypress

Cypress CY8C28623-24LTXI User manual

Cypress

Cypress EZ-USB FX3 CYUSB3KIT-001 User manual

Cypress

Cypress CYUSBS234 User manual

Cypress

Cypress MB90910 Series User manual

Cypress

Cypress MB966B0 Series User manual

Cypress

Cypress CY8CKIT-026 User manual

Cypress

Cypress FM0+ S6E1C SERIES User manual

Cypress

Cypress FM3 Series User manual

Cypress

Cypress Perform PSOC 5LP PROTOTYPING KIT User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide

Silicon Laboratories

Silicon Laboratories C8051F800 user guide