Cypress CV-401D User manual

CV-401D

DVI-D to Video Scan

Converter

Operation Manual

CV-401D

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 April 2011

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

VR0 20110425 Preliminary Release

Table of Contents

1. Introduction..................................................................................1

2. Applications.................................................................................1

3. PackageContents......................................................................1

4. SystemRequirements..................................................................1

5. Features........................................................................................ 1

6. Specifications..............................................................................2

6.1 Support Input Timing ........................................................ 2

7. OperationControlsandFunctions............................................. 3

7.1 Top Panel ...................................................................... 3

7.2 Left Panel ...................................................................... 3

7.3 Right Panel .................................................................... 4

8. OSDMenu....................................................................................4

9. ConnectionandInstallation....................................................... 6

1. Introduction

The DVI to Video Scan Converter is designed to convert digital signal from

DVI-D source to analog CVBS signal of NTSC or PAL system The device is HDMI

1.2 & DVI 1.0 compliant and it features many great functions such like 3D noise

reduction, frame rate conversion, adaptive contrast enhancement… and etc.

Further, a simplify OSD function is available allowing user with easy viewing on

the displaying status.

2. Applications

• DVI signal display on TV monitor

• Graphic Card signal display on CRT display

• Displaying PC signal on the LCD display

3. Package Contents

• DVI-D to Video Scan Converter

• Power Adaptor

• Operation Manual

4. System Requirements

Input source equipment such as PC/NB signal with DVI cable and output to TV

with CVBS input jack and connection cable.

5. Features

• DVI 1.0 compliant

• Converts video signal from DVI-D source to NTSC or PAL signal

• Accepts a wide range of DVI-D input resolution from 480p to 1080p@60Hz

and PC from VGA to WUXGA@60HzRB

• 3D noise reduction in both temporal and spatial domain

• Frame rate conversion

• Adaptive contrast enhancement

• OSD Display

• Overscan and underscan adjustment

• Phase and Aspect adjustment

• No software installation require

• Compact and elegant design

Note: This product does not process HDCP input. When receiving content

that has HDCP encryption there will be no video output.

6. Specications

Input Port 1 x DVI-D

Output Ports 1 x CVBS

Output Video NTSC/PAL

ESD Protection Human body model: ± 8kV (air-gap discharge)

± 6kV(contact discharge)

Power Supply 5V DC / 1A linear power adaptor (US/EU

standards, CE/FCC/UL certied)

Or 5V / 1.2A switching power adaptor (with

universal plug, CE/FCC/UL certied)

Dimensions (mm) 64 (W) x 104 (D) x 26 (H)

Weight (g) 120

Chassis Material Plastic

Silkscreen Color White

Operating Temperature 0°C~40°C / 32°F~104°F

Storage Temperature -20°C ~60°C / -4°F~140°F

Power Consumption 3W

Relative Humidity 20 ~90%RH (non-condensing)

6.1SupportInputTiming

HD Timing

480p 60

576p 50

720p 50,60

1080i 50,60

1080p 50,60

PC Timing

640x480 60,72,75,85

720x400 70

800x600 56,60,72,75,85

1024x768 60,70,75,85

1152x864 70,75,85

1280x720 60

1280x768 60RB,60

1280x800 60RB,60

1280x960 60

1280x1024 60

1366x768 60RB,60

1400x1050 60RB,60

1440x900 60RB,60

1600x1200 60

1680x1050 60RB,60

1920x1200 60RB

Note: When the input timing is not supported, the OSD will display “IN Not Support”.

7. Operation Controls and Functions

7.1TopPanel

1 2

1. NTSC/PAL MENU (Hold): Press this button to bring up the OSD which

will display the input timing and output TV system information.

While the OSD is still displaying press the button again to switch output TV

system from NTSC to PAL or from PAL to NTSC.

Press this button for 3 seconds the OSD will bring up the selection menu.

Press it sequentially to select the desire setting.

2. Power LED: This LED will illuminate in RED when the power is connected

with the power supply.

7.2LeftPanel

1. DVI-D IN: This slot is to connect with source equipment such as PC or

laptop for input DVI signal with DVI cable.

7.3RightPanel

1 2

1. CV OUT: This slot is to connect with display TV or monitor with RCA cable

for output image display.

2. DV5V: Plug the 5V DC power supply included in the package into the

unit and connect the adaptor to AC wall outlet.

8. OSD Menu

IN 1280 x 960 @60 (Input Timing) Press the Menu button once to

bring out the OSD which display

the IN & OUT information.

OUT NTSC (Output TV System)

NTSC Press the Menu button for 3 seconds to bring

out the OSD then press it sequentially to move

the OSD cursor for the desire selection. Once

the selection is made, leave it as the OSD

display on the screen, after few seconds the

OSD will disappear and the display will output

the selection result.

PAL

Underscan 1

Underscan 2

Overscan

Aspect Adj

Full Screen

Letterbox

Pan & Scan

Auto TV 4:3

Auto TV 16:9

Below is the example of the scan selection result.

Aspect Adjustment: There are total of 5 different adjustments under Aspect

and they are Full Screen, Letterbox, Pan & Scan and Auto TV 4:3 & 16:9.

Full Screen: To allow the image to ll out the screen of the TV.

Letterbox: To t the output image closer to the input source, compressed the

upper and lower image for 16:9's content to 4:3's TV.

Pan & Scan: To t the output image closer to the input source, compressed

the right and left image for 4:3's content to 16:9's TV.

Auto TV 4:3: Allowing the device to auto detect input source signal of 4:3 or

16:9 and make the auto adjustment to 4:3.

Auto TV 16:9: Allowing the device to auto detect input source signal of 16:9

or 4:3 and make the auto adjustment to 16:9.

Blow is the sample chart of the selection result:

Aspect Adj

Source TV

Full Screen Letterbox Pan&Scan Auto TV 4:3 Auto TV

16:9

X X X

X X

XXX

9. Connection and Installation

Table of contents

Other Cypress Media Converter manuals

Cypress

Cypress DataBender CVX-1300 User manual

Cypress

Cypress DCT-1D User manual

Cypress

Cypress CDM-600 User manual

Cypress

Cypress OSM-2400 User manual

Cypress

Cypress CLUX-SDI2CSS User manual

Cypress

Cypress CM-398H User manual

Cypress

Cypress CDM-660 User manual

Cypress

Cypress SY-P290 User manual

Cypress

Cypress CPT-385 User manual

Cypress

Cypress CPT-386 User manual

Cypress

Cypress CP-300VD User manual

Cypress

Cypress DataBender CVX-1300 User manual

Cypress

Cypress CP-295NN User manual

Cypress

Cypress DCT-9 User manual

Cypress

Cypress CM-392 User manual

Cypress

Cypress CP-1262HE User manual

Cypress

Cypress CH-501TX User manual

Cypress

Cypress CP-1262HE User manual

Cypress

Cypress CSLUX-1080p User manual

Cypress

Cypress nT13AX06/CPLUS-V8E User manual

Cypress

Cypress CSO-T2 User manual

Cypress

Cypress CMDP-DL2DVI User manual

Cypress

Cypress CM-398DI User manual

Cypress

Cypress HTCP-255DN User manual

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide