CYP CDPS-P311 User manual
CDPS-P311
4K UHD+HDMI Video Streamer
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REVISION DATE SUMMARY OF CHANGE
VS1 17/08/18 Final technical review
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................4
6.1 Front Panel ................................................. 4
6.2 Rear Panel.................................................. 5
6.3 Remote Control......................................... 6
6.4 WebGUI Control ........................................ 7
6.4.1 Live Tab ............................................. 9
6.4.2 Streaming Tab ................................ 10
6.4.3 Audio Mixer Tab ............................. 12
6.4.4 Video Switch Tab ........................... 13
6.4.5 EDID Setting Tab............................. 15
6.4.6 User Conguration Tab.................. 17
6.4.7 System Setting Tab......................... 17
6.4.8 Logout Tab...................................... 18
6.5 RS-232 Control ......................................... 19
6.6 Telnet Control .......................................... 19
6.7 RS-232 and Telnet Commands .............. 20
7. Connection Diagram ....................................33
8. Specications ................................................34
8.1 Technical Specications ........................ 34
8.2 Video Specications............................... 35
8.3 Audio Specications............................... 36
8.4 Cable Specications .............................. 36
9. Acronyms .......................................................37
1
1. INTRODUCTION
This unit makes online broadcasting of live video an easy and simple
process. Video sources from cameras, PCs, video game consoles, etc.
are a breeze to connect for immediate broadcast. Video content up
to 4K UHD+ is supported and is automatically scaled to a resolution
that is more appropriate for efcient streaming. In addition to the
standard HDMI input, a VGA input with an analog stereo audio input
is also available as a source. An HDMI output is provided for local
monitoring of the selected input source.
All video content is encoded and streamed with minimal latency
and high quality making it ideal for live streaming events to a variety
of popular online streaming services or within the local network. An
audio mixer function is included, allowing an external audio source to
be mixed with the embedded audio of your HDMI source (LPCM 2.0
only) for your video stream.
Comprehensive EDID management provides improved compatibility
with different sink devices. The intuitive WebGUI provides easy control
of your live event stream including source selection, resolution, bitrate
and more. Audio functions include volume level adjustment, mute,
and mixer source selection. This unit can be controlled and congured
via an intuitive WebGUI or via standard Telnet or RS-232 connections.
2. APPLICATIONS
• Webcasting
• Social Media Broadcasting
• Live Event Streaming
• Video on Demand Streaming
3. PACKAGE CONTENTS
• 1×HDMI Video Streamer
• 1×5V/3A DC Power Adapter
• 1×Remote Control (CR-181)
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI or VGA source equipment such as a media player, video
game console, PC, or video camera.
• HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
• Video streaming preview support within the WebGUI requires the
use of the Chrome, Internet Explorer or Safari browser with the
appropriate plugins (VLC for IE and Safari or VXG Player for Chrome)
installed.
Note: The Firefox browser does not currently support the WebGUI’s
video streaming preview window.
• To view RTSP streams directly on the local network, RTSP stream
compatible video player software (such as VLC Media Player or
PotPlayer) must be used.
5. FEATURES
• 1 HDMI and 1 VGA input
• 1 HDMI output
• HDCP 1.x and HDCP 2.2 compliant
Note: HDCP encrypted sources can not be streamed over the
Internet and will be blacked out
• HDMI input/output supports resolutions up to 4K UHD (18Gbps,
4K@60Hz 4:4:4, 8-bit)
• VGA input supports resolutions up to WUXGA (1920×1200@60Hz)
• Advanced H.264 video streaming is provided at QVGA (320×240),
VGA (640×480), 720p, or 1080p at up to 60fps
• Audio embedding and mixing support with the analog stereo audio
input
Note: Analog audio can only be mixed with LPCM 2.0 audio from
the HDMI source.
• Integrated support for live streaming to Facebook or YouTube
channels
3
• Can act as a streaming server (using RTP/RTSP protocols) or
streaming client (using the RTMP protocol)
• On screen countdown timer to inform the audience and event host
of the scheduled ending time for the current stream
• Supports text overlays over live broadcasts
• Integrated downscaling function will convert UHD video content (up
to 4K@60Hz) down to 1080p or lower for live video broadcast
• Generates 4 simultaneous streams from the same video source
(1080p@60fps, 1080p@30fps, VGA@30fps, QVGA@30fps) for easy
system integration at multiple bandwidth targets
• Supports automatic input switching
• Advanced EDID management including Internal , External & User
congured EDID selections
• Control via front panel buttons, WebGUI, Telnet, RS-232, and IR
remote
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IR STOP PLAY
SOURCE
SEL
AUDIO
MIXER
STATUSPOWER
1 2 3 4 5 6 7
1POWER BUTTON & LED: Press this button to power the unit on or
place it into stand- by mode.
2IR WINDOW: Accepts IR signals from the included IR remote for
control of this unit only.
3SOURCE SEL BUTTON: Press this button to toggle between the HDMI
and VGA inputs. The status LED will change depending on the
input selection.
Note: Changing the input source will cause the video stream to
restart. Connected stream targets may need to be restarted or
reconnected.
4STATUS LED: This multi-function LED indicates the current video
source selection, audio mixer state and RTMP streaming client
(streaming to YouTube or Facebook) status.
LED State Description
RED Video source is VGA
BLUE Video source is HDMI
PURPLE Video source is HDMI, Audio Mixer is enabled
Solid (any color) RTMP streaming client is inactive
Blinking (any color) RTMP streaming client is active
5AUDIO MIXER BUTTON: Press this button to enable/disable the
Audio Mixer function when the video source is HDMI. The mixer’s
settings are congured within the WebGUI.
6STOP BUTTON: Press this button to stop streaming to the congured
YouTube or Facebook target server. The Status LED will be lit solidly
to indicate the stream is stopped.
5
7PLAY BUTTON: Press this button to start streaming to the congured
YouTube or Facebook target server. The Status LED will blink to
indicate the stream is currently active.
Note: The target streaming service (YouTube or Facebook)
controlled by this button is dened in the WebGUI.
6.2 Rear Panel
SERVICERS-232LANHDMI INHDMI OUT
DC 5V
AUDIO INVGA IN
123 4 5 6 78
1HDMI OUT PORT: Connect to an HDMI TV, monitor or amplier for
digital video and audio output.
2HDMI IN PORT: Connect to HDMI source equipment such as a
media player, game console or set-top box.
Note: HDCP encrypted sources can not be streamed over the
Internet and will be blacked out.
3VGA IN PORT: Connect to VGA source equipment such as a PC or
laptop.
4AUDIO IN PORT: Connect to the stereo analog output of a device
such as a CD player or PC.
5LAN PORT: Connect to a network switch or router for transmission
and distribution of streamed video as well as to control the unit via
Telnet or WebGUI.
Note: The maximum number of simultaneous stream connections is
limited by available network bandwidth and the unit’s CPU load.
6RS-232 PORT: Connect directly to a PC, laptop or other serial
control device to send RS-232 commands to control the unit.
7SERVICE PORT: This slot is reserved for rmware update use only.
8DC 5V PORT: Plug the 5V DC power adapter into this port and
connect it to an AC wall outlet for power.
Table of contents
Other CYP TV Tuner manuals
