CYP CSC-6015 User manual
CSC-6015
4K UHD+HDMI to HDMI Scaler
Quad-Set
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2017 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
RDV1 11/12/17 Preliminary release
VS1 22/12/17 Final technical review
VS2 09/04/18 A minor change to the
package contents
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 4
6.3 OSD Menu.................................................. 5
6.4 EDID Management ................................... 9
7. Connection Diagram ....................................10
8. Specications ................................................11
8.1 Technical Specications ........................ 11
8.2 Video Specications............................... 12
9. Acronyms .......................................................13
1
1. INTRODUCTION
This HDMI to HDMI Scaler Quad-Set is designed to convert and
scale a wide range of HDMI sources for output to an equally wide
array of HDMI resolutions with 4 independent scaling units in a single
case. Input sources are supported at resolutions up to and including
4K@60Hz (4:4:4, 8-bit). Supported output resolutions range from SVGA
to 3840×2160@60Hz (4:4:4, 8-bit). The efcient and compact design
ensures that the user can set up each scaling unit quickly and get
high quality pictures on each display. Additionally, this unit provides
analog stereo breakout audio (LPCM 2.0 sources only) to support the
use of external powered speakers. A perfect tool for your HD and UHD
signal conversion needs. Each scaling unit is controlled independently
via front panel buttons with an On-Screen Display (OSD).
2. APPLICATIONS
• Displaying HD video on UHD displays
• Displaying UHD video on HD displays
• Displaying HDMI sources on DVI displays with analog audio breakout
to external speakers
• Video signal quality and level management
3. PACKAGE CONTENTS
• 1×HDMI to HDMI Scaler Quad-Set
• 1×5V/6A DC Power Adaptor
• 1×Power Cord
• 1×Rack Mount Ears (Set of 2)
• 1×Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as media players, video game
consoles or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
5. FEATURES
• HDMI inputs and outputs with 18Gbps (600MHz) 4K UHD support
• DVI 1.0 compliant with the use of an HDMI-DVI adaptor
• HDCP 1.4 and 2.2 compliant
• 4 independent scaling units within a single rack-mountable case
• Supports HD resolutions up to 3840×2160@60 Hz (4:4:4, 8-bit) &
4096×2160@60 Hz (4:4:4, 8-bit)
• Supports 16-bit Deep Color up to 1080p@60Hz
• Supports 12-bit Deep Color up to 4K@60Hz (YUV 4:2:0) & 4K@30Hz
(4:4:4)
• Supports pass-through of LPCM 7.1, Bitstream and HD Bitstream
audio formats over HDMI
• Analog stereo audio breakout (LPCM 2.0 sources only)
• Provides EDID management via EDID bypass, 6 built-in EDIDs or 1
user modiable EDID
• Supports up and down scaling of a wide variety of HDMI source
resolutions, from 480p to 4K@60Hz.
• Each scaling unit is controlled independently via front panel buttons
with an On-Screen Display (OSD)
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
MENU– +ENTER POWER
LOCK
POWER
B
MENU– +ENTER POWER
LOCK
C
MENU– +ENTER
LOCK
DA
POWER MENU– +ENTER
LOCK
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Note: The functionality of scaling units A, B, C, and D is identical,
however each unit is controlled, and operates, independently.
1POWER LED: This LED will illuminate when the unit is receiving power.
When a valid HDMI source is detected the LED will be green, if
there is no valid HDMI source, the LED will be red.
2MENU: Press to enter the OSD menu, or to back out from menu
items.
Note: Press and hold the “MENU” button for 3 seconds while
connecting the power supply to reset all settings to the factory
defaults. Pressing “MENU” and “−” together will reset the output
resolution to 720p@60Hz. Pressing “MENU” and “+” together will
reset the output resolution to XGA (1024×768@60Hz).
3 − & +: Press to move up and down or adjust selections within OSD
menus.
4ENTER: Press to conrm a selection within the OSD or to go deeper
into a menu item.
LOCK: Pressing and holding the “ENTER” and “+” buttons for 3
seconds activates the front panel Lock Mode. The power LED
will blink red multiple times to indicate that Lock Mode has been
activated. To deactivate the front panel Lock Mode, press and
hold the “ENTER” and “+” buttons again. The power LED will
blink green multiple times to indicate that Lock Mode has been
deactivated.
Note: When Lock Mode is active the OSD menu will be disabled,
however OSD signal info will still display normally. If a button is
pressed while Lock Mode is active the power LED will blink red 3
times.
4
6.2 Rear Panel
HDMI IN SERVICE
AUDIO
OUTHDMI OUT
D
DC 5V
HDMI IN SERVICE
AUDIO
OUTHDMI OUT
C
HDMI IN SERVICE
AUDIO
OUTHDMI OUT
B
HDMI IN SERVICE
AUDIO
OUTHDMI OUT
A
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 5
Note: The functionality of scaling units A, B, C, and D is identical,
however each unit is controlled, and operates, independently.
1HDMI OUT: Connect to HDMI TVs, monitors or ampliers for digital
video and audio output.
Note: If no valid HDMI input source is detected the unit will output
blank video using the selected free run color.
2HDMI IN: Connect to HDMI source equipment such as media
players, game consoles or set-top boxes.
3AUDIO OUT: Connect to powered speakers or an amplier for
stereo analog audio output.
Note: Supports LPCM 2.0 audio only. Bitstream formats will be
muted.
4SERVICE: Connect a USB thumb drive to this slot to upload a user
EDID or to perform a rmware update.
5DC 5V: Plug the 5V DC power adapter into this port and connect it
to an AC wall outlet for power.
5
6.3 OSD Menu
LEVEL 1 LEVEL 2 LEVEL 3
Output Resolution 800×600@60Hz
1024×768@60Hz
1280×768@60Hz
1360×768@60Hz
1280×800@60Hz
1440×900@60Hz
1280×1024@60Hz
1400×1050@60Hz
1680×1050@60Hz
1600×1200@60Hz
1920×1200@60Hz (RB)
720×480p@60Hz
720×576p@50Hz
1280×720p@50Hz
1280×720p@60Hz
1920×1080i@50Hz
1920×1080p@50Hz
1920×1080i@60Hz
1920×1080p@60Hz
3840×2160p@24Hz
3840×2160p@25Hz
3840×2160p@30Hz
3840×2160p@50Hz
(Y420)
3840×2160p@60Hz
(Y420)
3840×2160p@50Hz
3840×2160p@60Hz
Bypass
Table of contents
Other CYP Media Converter manuals
