CYP OR-42CD-4K22 User manual
OR-42CD-4K22
UHD+ 4x2 HDMI Matrix with Analogue out
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 16/03/2020 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 Remote Control (Optional)...................10
6.4 RS-232 Pinout and Defaults.................10
6.5 Serial Commands.....................................11
7. Connection Diagram .......................... 20
8. Specifications...................................... 21
8.1 Technical Specifications ........................21
8.2 Video Specifications................................22
8.3 Audio Specifications...............................24
8.4 Cable Specifications ...............................25
9. Acronyms............................................. 26
6
1. INTRODUCTION
This 4K UHD+4×2 HDMI Matrix with Audio Output provides the ability
to connect up to four 4K UHD+HDMI sources to up to two 4K UHD+
HDMI displays and freely switch between them. This unit comes with full
support for 4K@60Hz (4:4:4, 8- bit) signals as well as support for 16-bit
Deep Colour, HDR (High Dynamic Range), 3D content, HD audio and other
features defined by the HDMI 2.0 specification.
A high-quality local analogue stereo audio breakout from a selected
HDMI output is also available. Each input’s EDID can be independently set
to use either an internal (1080p@60Hz) or external (sink-copied) EDID. This
unit also provides per-output auto source switching as well as connected
display power control using CEC or RS-232 commands. Control of the unit
is provided via front panel buttons, RS-232, and IR remote.
2. APPLICATIONS
Smart Home Control
Control Centre
Function Room
Product Showroom
Ballroom
3. PACKAGE CONTENTS
1× UHD+4×2 HDMI Matrix with Audio Output
1× 5V/2.6A DC Power Adapter
1× Remote Control (CR-190) (Optional)
2× 3-pin Terminal Block
1× Shockproof Feet (Set of 4)
1× Operation Manual
7
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media players, video game consoles,
or set-top boxes.
HDMI receiving equipment such as HDTVs, monitors, or audio
amplifiers.
The use of Premium High Speed HDMI cables is highly recommended.
5. FEATURES
HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
4 HDMI inputs and 2 HDMI outputs
Matrix switching with sequential input selection via front panel
controls or discrete input selection via IR remote and RS-232
Supports up to 4K UHD+(18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output
Supports 10-bit and 12-bit HDR (High Dynamic Range) input and
output
Supports 16-bit 'Deep Colour' input and output up to 1080p@60Hz
Supports pass-through of many audio formats including 8 channel
LPCM, Bitstream, and HD Bitstream
High-quality DAC provides local analogue stereo audio breakout from
the selected HDMI output (LPCM 2.0 sources only)
Per-input EDID management with internal or external EDID options
Per-output selectable auto-switch functionality
Basic display power automation via RS-232 and CEC
Controllable via front-panel buttons, RS-232, and IR remote
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
ON
1234
POWER
OR-42CD-4K22
AUTO 1234DISPLAY
ON/OFF
DISPLAY AUDIO EDID
SERVICE
AUDIO OUT
A
OUT
B
7654321 1098 11
1IR Window: Accepts IR signals from the optional IR remote for control
of this unit only.
2POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
3AUTO A/B LEDs: These LEDs will illuminate to indicate if auto
switching has been enabled on the associated output.
4INPUT 1~4 A/B LEDs: The illuminated LEDs indicate which source is
currently selected for the associated output.
5DISP. A/B LEDs: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no sink is
detected the LED will remain off.
6AUDIO A/B LEDs: The illuminated LED indicates which output is
selected as the source for the analogue audio output. If both LEDs are
off, the analogue output is muted.
Note: Only LPCM 2.0 audio sources are supported.
7OUT A/B Buttons: Press these buttons to sequentially switch through
the available inputs for the associated output. Pressing and holding
a button for 3 seconds will enable or disable that output’s auto
switching function.
8DISP. Button: Press this button to turn the connected displays on or
off using CEC or RS-232 commands.
Note: CEC functionality must be enabled on the connected displays. Not
all displays support all CEC commands.
9AUDIO Button: Press this button to sequentially switch the analogue
audio output source between Output A, Output B, and mute.
9
10 EDID Dipswitch Block: Each dipswitch toggles the EDID source for
the associated HDMI input between external EDID (DOWN), and
internal EDID (UP).
Note: The external EDID defaults to Output A’s EDID. The internal EDID
supports 1080p60 with LPCM 2.0 audio for maximum compatibility.
11 SERVICE Port: This port is reserved for firmware update use only.
6.2 Rear Panel
1 2 3 4 5
1HDMI IN 1~4 Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes. DVI sources are
supported with the use of an HDMI to DVI adapter.
2HDMI OUT A~B Ports: Connect to HDMI TVs, monitors, or amplifiers
for digital video and audio output.
3AUDIO OUT Port: Connect to powered speakers, headphones, or an
amplifier for analogue stereo audio output.
4RS-232 A 3-pin Terminal Block: Connect directly to a PC, laptop, or
other serial control device with a 3-pin adapter cable to send RS-232
commands to control the unit. Alternatively, connect to an RS-232
controllable display connected to output A to send power on/off
commands to it when the DISP. button is pressed.
RS-232 B 3-pin Terminal Block: Connect to an RS-232 controllable
display connected to output B to send power on/off commands to it
when the DISP. button is pressed.
5DC 5V Port: Plug the 5V DC power adapter into this port and connect
it to an AC wall outlet for power.
10
6.3 Remote Control (Optional)
1POWER Button: Press this button to
power the unit on or off.
Note: The unit will also transmit the
appropriate CEC/RS-232 on/off commands
to any connected displays.
2OUT A 1~4 Buttons: Press any of these
buttons to immediately switch Output A
to the corresponding input.
3OUT B 1~4 Buttons: Press any of these
buttons to immediately switch Output B
to the corresponding input.
6.4 RS-232 Pinout and Defaults
Serial Port Default Settings
Baud Rate 19200
Data Bits 8
Parity Bits None
Stop Bits 1
Flow Control None
RS-232 Port A (Unit control) RS-232 Port B
1
2
3
RxD
GND
TxD
3-pin
Terminal Block
1
2
3
RxD
GND
TxD
3-pin
Terminal Block
POWER
CR-190
1 2 3 4A
1 2 3 4B
1
2
3
Table of contents
Other CYP Matrix Switcher manuals
CYP
CYP PUV-662-4K22 User manual
CYP
CYP SM-2X4-HDMI-LC User manual
CYP
CYP CMSI-8H8HS User manual
CYP
CYP HDBT PU-4H4HBTE-4K User manual
CYP
CYP OR-IR44 User manual
CYP
CYP CPLUS-662CVAL User manual
CYP
CYP OR-HD88S User manual
CYP
CYP CMPRO-UA8H8HS User manual
CYP
CYP CDPS-U10H2HFS User manual
CYP
CYP CMSI-8H8CVL User manual
CYP
CYP CMLUX-44S User manual
CYP
CYP CMPRO-U8H8CVPL User manual
CYP
CYP OR-44U-4K22 User manual
CYP
CYP Elpro Video Labs CDPS-UC4H4HFS Installation manual
CYP
CYP SM-2X2-HDMI-LC User manual
CYP
CYP CFSW-51MHL User manual
CYP
CYP OR-42SA-4K22 User manual
CYP
CYP CMSI-8H8HS User manual
CYP
CYP nT14AX16 User manual
CYP
CYP PU-O4H4C User manual
