CyberView RP-X924 User manual
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
User Manual
751
9U Rackmount Display Panel
RP-X924
Options :
- SDI / MCS
- Audio
- Touchscreen / DC power
- MIL-type or lockable connector
Designed and manufactured by Austin Hughes
dedicated KVM switch and rackmount screen technology
24” WUXGA 1920 x 1200 LCD
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
Legal Information
First English printing, November 2020
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, re or electrical shock.
■ Only qualied service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualied service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modied or removed.
■Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, re, water, lightning, or other acts of nature, unauthorized product modication, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□ Causes external to the product, such as electric power uctuation or failure.
□ Use of supplies or parts not meeting our specications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
< Part. 3 > Options
3.1 3G / HD / SD-SDI Broadcast-grade input
3.2 MCS Multi-display control solution
3.3 Audio
3.4 X24" Touchscreen : Resistive ( 1-point touch )
3.5 DC Power : 12V / 24V / 48V / 125V
3.6 MIL-type or lockable connector
P. 11
P.12
P.13
P.14 - 15
P.15
P.16
< Part. 2 > Specications / OSD / Remote Controller
2.1 Product Specications
2.2 On-screen Display Operation ( OSD )
2.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP )
P.5 - 6
P.7 - 8
P.9 - 10
< Part. 1 > RP-X924
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
Contents
P. 1
P.1 - 2
P.3 - 4
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip o the nish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microber cloth rst, not directly on the parts you are cleaning.
3
4
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
P. 1
RP-X924
Basic I/O
Options
Power VGADVI-D HDMI
Audio
out - in - in
Video PC
: DVI-D + VGA + HDMI w/ speaker
: SDI, Audio, USB for touchscreen & DC power
LCD panel
LCD membrane
Latch to release the display panel from the
rear bracket
Rear mounting bracket
Power adapter basket
1
3
Front view
3
1
2
Rear view
4
2
4
Power adapter
Power cord
5
5
< 1.1 > Package Content RP-X924
< Part 1 >
RP-X924 unit X 1
- 6ft VGA cable X 1
- Power adapter X 1
- Power cord X 1
- Fastener screw for rear bracket x 2
< 1.2 > Structure Diagram
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
P. 2
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H) Net Weight Gross
Weight
RP-X924 553 x 70 x 385 mm
21.8 x 2.8 x 15.2 inch
583 x 124 x 529 mm
23 x 4.9 x 20.8 inch
11.4 kg
25.1 lb
12.7 kg
28 lb
< 1.2 > Dimension
Front View Side View
UNIT : mm
1mm = 0.03937 inch
Bottom View
Rear View
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
P. 3
RP-X924
■Hardware and M4*4 pcs for VESA mount are not provided
VESA mount ( 100*100mm )
M4 screw
< 1.3 > VESA mount Installation
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
P. 4
< 1.3 > Rear Mounting Bracket Installation
■ Mount the rear bracket with M6 screw set.
■ 8 x M6 screw set are required.
M6 screw sets are not provided.
Step 1
Step 2
■Insert the RP-X924 display panel into the
rear bracket.
Complete the installation
Step 4
Step 3
■Fix the unit to the bracket with the top latch.
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
P. 5
RP-X924
LCD
Panel
Panel Size ( diagonal ) 24.1-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1920 x 1200
Brightness ( typ. ) 300
Contrast Ratio ( typ. ) 1000:1
Color 16.7 M
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 14
Dot pitch ( mm ) 0.27
Display Area ( mm ) 518.40H x 324.0V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 30,000
Video
Connectivity
Digital HDMI HDMI 1.3 / HDCP 1.3
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Audio
Connectivity
Audio Input Connector 3.5mm stereo jack
Impedance / Power level 30kΩ / 750mV
Audio Output Connector 3.5mm stereo jack
Resistance / Power level 30kΩ / 2.8V
Speaker Dual Stereo Speaker 10W x 2
* When the audio output is connected, speaker output is OFF
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption Screen ON Max. 33W
Power saving mode Max. 2W
Power button OFF Max. 1W
< 2.1 > Product Specications
< Part 2 >
Compliance EMC FCC & CE certied
Safety CE / LVD certied
Environment RoHS3 & REACH compliant
■Insert the RP-X924 display panel into the
rear bracket.
■Fix the unit to the bracket with the top latch.
UM-CV-751-RP-X924-Q221V1 www.austin-hughes.com
P. 6
Applicable
Format
DVI-D / VGA Input PC Signal 1920 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input * PC Signal Same as VGA
Video Signal 1080p : 60Hz
720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )
* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly
on a full screen. If so, please adjust the display card setting on display size to x the issue.
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage / Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 10~300Hz 0.5G RMS random
Physical
Specication
Product ( W x D x H ) 553 x 70 x 385 mm
21.8 x 2.8 x 15.2 inch
Packing ( W x D x H ) 583 x 124 x 529 mm
23 x 4.9 x 20.8 inch
Net Weight 11.4 kg / 25.1 lb
Gross Weight 12.7 kg / 28 lb
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Table of contents
Popular Projection Screen manuals by other brands
FART PRODUKT
FART PRODUKT Standard SCREEN Installation instruction
Draper
Draper E Series Installation & operating instructions
Elite Screens
Elite Screens Elite Tripod Series user guide
Laarhoven
Laarhoven Companion II General assembly instructions
Renogy
Renogy RMS-LFPS-US manual
Da-Lite
Da-Lite ExecutiveElectrol Instruction book
