Crystal Quest CQE-DS-06001 Installation guide
www.crystalquest.com/ warranty.html
2
This user’s manual outlines installation, operating, maintenance, and
troubleshooting details vital to the sustained performance of your
system.
If your system is altered at the site of operation or if the feed water
conditions change, please contact your distributor to determine the
proper recovery for your application.
NOTE: In oder to maintain warranty, an operating log must be
maintained. Copies must be sent to distributor for review.
NOTE: Prior to operating or servicing the Dosing Pump,
this user manual must be read and understood. Keep it and
other associated information for future reference and for new
operations.
Make sure dosing pump is the same
voltage as power supply.
After handling solutions chlorine,
antifoulant, etc.
Please clean hands thoroughly.
3
UNPACKING
4
COMPONENTS AND FUNCTIONS
* Make sure dosing pump is the
same voltage as power supply.
1. Exhaust Knob
2. Discharge Valve
3. Back Cover
4. Front Cover
5. Suction Valve
6. Pump Head
7. Back Tubing Jack
8. Running Indication
9. Frequency Display
10. Keys
11. AC 220/110
12. Level
13. Contol Signal
5
FLOW ADJUSTING AND KEY SETTINGS
• Brown + Power (Red + Blk)
• Blue + Common (White)
• Yellow Green Stripe + Ground
• Wire the dosing pump into th RO pump motor so
the dosing pump will only run when the RO is on.
• The key setting will remain the same when
operation returns.
6
If the pump head has no exhaust knob, unscrew the
nut on the discharge valve to exhaust.
NOTE:
DIMENSIONS AND CAPABILITY
7
INSTALLATION
Notice:
To prevent precipitation, keep
foot valve elevated to have a
20mm clearence above the
bottom of the tank.
Chemicals Tank
8
INSTALLATION CONTINUED
• One end of back tubing inserted into
the head, the other end put into the
chemical tank
• Put the nut and clasp over the tubing
• Put the tubing into the nozzle hard
Chemical Tank
Open dosing and height dierence
Check valve Tubing, Nut , and Nozzle comes pre-assembled.
After handling solutions chlorine, antifoulant, etc.
Please clean hands thoroughly.
9
ONE-YEAR LIMITED WARRANTY
CRYSTAL QUEST®warrants your Dosing Pump System for one year from the
date of purchase against all defects in materials and workmanship when
used in compliance with the manual. CRYSTAL QUEST®disclaims all implied
warranties including, without limitation, warranties of merchantability
and tness for a particular purpose. If for any reason the product proves
to be defective within one year from the date of purchase, please call for
assistance. This warranty gives you specic legal rights and you may have
other legal rights which vary from state to state. CRYSTAL QUEST®assumes no
responsibility for incidental or consequential damages; for damages arising
out of misuse of the product or the use of any unauthorized attachment.
Some states do not allow the exclusion or limitation of implied warranties or
incidental or consequential damages, so the above limitations or exclusions
may not apply to you. Should service be required during or after the warranty
period or should you have any questions regarding how to use your CRYSTAL
QUEST®Dosing Pump System contact our Technical Support Department at
service@crystalquest.com, Monday through Friday, 9 AM to 5 PM Eastern
Time.
KEEP THIS MANUAL FOR FUTURE REFERENCE AND UNIT MAINTENANCE
Online warranty information
http://crystalquest.com/warranty.html
Product design is subject to change without notice.
For further assistance, contact your Crystal Quest dealer
or visit us at www.crystalquest.com
To view the latest edition of the Dosing Pump Guide visit CrystalQuest.com
Please note all drawings, pictures, colors and sizes are approximate for illustrative purposes only
and may not exactly resemble the end product.
10
IMPORTANT NOTES
Your dosing system can enhance the eectiveness of your water filtration
system, making it more eicient and easier to maintain. Use it during
pre-treatment, primary treatment, or post-treatment to control pH levels,
eliminate bacteria & viruses, reduce chlorine, or other tasks related to
water treatment depending on your specific needs. Common types of
dosing solutions include....
1. Anti-silica: Compounds added to water treatment systems to
prevent the precipitation & buildup of silica, which can cause scaling
on membranes and other surfaces in the system. Examples: citric
acid, sodium hexametaphosphate, sodium aluminate, polymers
2. 2. Anti-scalants: Anti-scalants: Used to prevent scale, or the formation of mineral
deposits on you filtration system & pipes which can clog the system
& reduce its eiciency. Examples: citric acid, polyacrylic acid,
polyphosphates
3. Disinfection: Used to disinfect water that has passed through your
filtration system. Reacts with organic matter & bacteria, killing
harmful microorganisms. Examples: chlorine, chlorine dioxide, ozone,
hydrogen peroxide, sodium hypochlorite
4. Anti-foulants: Used to prevent the buildup of biological fouling
in water systems. Fouling occurs when bacteria, algae, & other
microorganisms grow on the surfaces of filtration equipment & pipes,
reducing flow rate & increasing energy consumption. Examples:
chlorine, bromine, polyamines, glutaraldehyde
5. pH adjustment: Adds an acidic or basic compound to your water
to maintain pH levels within the optimum range for your system.
Examples: chlorine dioxide, calcium hydroxide, soda ash
The dosing solution used will depend on the specific contaminants
present in the water, the desired level of water purity, and the specific
application. Many treatment systems use a combination of dosing
solutions to achieve the desired result.
Table of contents
Popular Water Pump manuals by other brands
Sykes AmeriPumps
Sykes AmeriPumps GP100M Operation and maintenance instructions
DUROMAX
DUROMAX XP WX Series user manual
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 operating instructions
Franklin Electric
Franklin Electric IPS Installation & operation manual
Xylem
Xylem e-1532 Series instruction manual
Milton Roy
Milton Roy PRIMEROYAL instruction manual