Crown CTs 8200 USP/CN User manual
AC Power Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Measurements made with 120VAC mains. Line current figures for 230VAC units derived by multiplying 120VAC figures by 0.5.
Data based on all channels driven.
watts in watts out dissapated Btu/hr kcal/hr
At Idle (8.4 Ohm mode
)
70 0 70 239 60
At Idle (70/100V mode) 114 0 114 389 98
1/8th Power Pink Noise 8 Ohms/Ch. 160x8
Typical of program material 16 Ohms Bridge 320x4
just at clip. 4 Ohms/Ch. 200x8
8 Ohms Bridge 400x4
70V/Ch. 200x8
100V Bridge 200x4
1/3rd Power Pink Noise 8 Ohms/Ch. 160x8
Typical of program material 16 Ohms Bridge 320x4
with severe clipping. 4 Ohms/Ch. 200x8
8 Ohms Bridge 400x4
70V/Ch. 200x8
100V Bridge 200x4
CTs 8200
Load Rated
Power
Line Current
120VAC
Line Current
230VAC
Watts Thermal Dissipation
8.7 4.3 725 172 553 1889 476
13.3 6.7 1155 218 938 3200 807
10.1 5.1 857 203 653 2230 562
13.1 6.5 1136 437 699 2385 601
19.3 9.7 1748 557 1190 4062 1024
15.3 7.7 1344 552 792 2702 681
Other manuals for CTs 8200 USP/CN
1
Table of contents
Other Crown Amplifier manuals
Crown
Crown XLS 3U Series Manual
Crown
Crown XS700 User manual
Crown
Crown Macro-tech -2400 User manual
Crown
Crown MA-5000i User manual
Crown
Crown M-600 User manual
Crown
Crown XTi 1000 User manual
Crown
Crown CTs 8200 USP/CN User manual
Crown
Crown CTs 4200USP/CN User manual
Crown
Crown M Series User manual
Crown
Crown DSi 1000 User manual
Crown
Crown D-150 User manual
Crown
Crown CDi 1000 User manual
Crown
Crown CTs Series User manual
Crown
Crown BCA Manual
Crown
Crown XTi 6002 User manual
Crown
Crown D-45 User manual
Crown
Crown CDi 6000 User manual
Crown
Crown Macro-Tech 12000i User manual
Crown
Crown D-60 User manual
Crown
Crown MARCO-TECH 5000VZ User manual
