Crestron Flex R Series User manual

The Crestron Flex R-Series mobile UC system packages Crestron® unified

communications components with a wheeled cart for convenient

collaboration.

This document describes the installation and configuration of the

following R-Series mobile UC systems:

lUC-FCM-T: Crestron Flex R-Series Plus Mobile UC System for

Microsoft Teams® Rooms

lUC-FCM-Z: Crestron Flex R-Series Plus Mobile UC System for Zoom

Rooms™ Software

lUC-FCM-U: Crestron Flex R-Series Plus Mobile UC System with

Universal Platform Support

In the Box

1 UC-FCM, Crestron Flex R-Series Plus Mobile UC System

Additional Items

1 Wheeled Cart (4532100)

1 Power extension cord, 6 ft (1.8 m) (2055992)

1 Mounting Shelf for Crestron Mercury® Devices (2055987)

1 CCS-CAM-USB-F-400, Huddly IQ™ Collaboration Camera

(6510482)

2 CBL-CAT5E-7, CAT5e cable, RJ-45-to-RJ-45, Black, 7 ft

(2.1m) (6509924)

1 CBL-HD-20, HDMI® cable, 20 ft (6.1 m) (6503567)

1 CBL-USB-A-BMICRO-6, USB 2.0 A - Micro-B, 6 ft (1.8 m)

(6510947)

1 CBL-USB-A-EXT-15, USB Extension Cable, Type A Male-to-

Female, 15 ft (4.6 m) (6508260)

1 CBL-USBC-HD-9, USB-C® to HDMI cable, 9 ft (2.7 m)

(6510718)

1 CEN-SW-POE-5, 5-Port PoE Switch (6506450)

1 PW-2420RU, Power Supply (6500187)

UC-FCM-T Only

1 CCS-UC-1-T-V, Crestron Mercury® UC Video Conference

Console for Microsoft Teams Software (6510716)

1 UC-BRKT-100-SD-ASSY, UC Engine Bracket Assembly

(6511033)

UC-FCM-Z Only

1 CCS-UC-1, Crestron Mercury® UC Video Conference Console

for Zoom Rooms Software (6508227)

1 UC-BRKT-100-SD-Z-ASSY, UC Engine Bracket Assembly

(6511147)

UC-FCM-U Only

1 CCS-UC-1-X, Crestron Mercury® X UC Video Conference

Console (6510610)

1 HD-RX-USB-2000-C , HDMI® over CATx Receiver (6510312)

1 CBL-HD-6, HDMI® cable, 6 ft (1.8 m) (6503565)

1 CBL-HD-THIN-HS-6, Thin HDMI® cable, 6 ft (1.8 m) (6510946)

1 DM-CBL-ULTRA-PC-20, DigitalMedia™ Ultra Patch cable

(CAT6), 20 ft (6.1 m) (6507640)

NOTE: For a list of items included with each component device,

refer to each device's Quick Start at crestron.com/manuals.

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

Assemble Mounting Components

In R-Series mobile UC systems, some component mounting is required. A

device mounting shelf for the included Crestron Mercury device is

premounted to the front of the cart. A UC bracket assembly, PoE switch,

power supply, power strip, retractable power cable, and retractable

Ethernet cable are premounted to the cart's interior for convenience. An

HDMI over CATx receiver is premounted in place of the UC bracket

assembly in universal R-Series systems (UC-FCM-U).

Attach the Display Mounting Bracket Arms

Prior to mounting the display (not included) to the cart, the display

mounting bracket arms must be attached to the display.

To attach the display mounting bracket arms:

1. Set the display on a flat surface with the screen side down. Ensure

that the surface is protected so that the screen is not damaged.

2. Align the mounting holes on the left and right edges of the display

mounting bracket arms over the mounting holes on the rear of the

display.

3. Follow the display manufacturer's instructions to attach the display

to the display mounting bracket arms using the supplied screws and

washers.

NOTE: Screw placement may differ from the following image

based on the location of the display's mounting holes.

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

Make Connections

To connect the system components:

1. Connect system components to the preinstalled cables. Connect the display power cord to the power strip inside of the bottom rear of the cart.

NOTE: If the display's power cord does not reach the integrated power strip, use the included 6 ft extension cord.

lMicrosoft Teams (UC-FCM-T) and Zoom Rooms Systems (UC-FCM-Z)

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

lUniversal System (UC-FCM-U)

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

2. Make LAN and power connections from the bottom rear of the cart as

shown below using the integrated retractable cables.

3. Make device presentation connections as shown in the following

diagrams.

lMicrosoft Teams (UC-FCM-T) and Zoom Rooms Systems

(UC-FCM-Z): A 20 ft HDMI cable (CBL-HD-20) is preattached to the

UC Engine assembly and coiled inside of the cart. Route the cable

through one of the grommets as shown below for presentation from a

laptop.

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

lUniversal Systems (UC-FCM-U)

Complete the Installation

Mount the Display

CAUTION: For safety, Crestron recommends that no fewer than two

people mount the display.

Mount the display mounting bracket arms with the attached display by

sliding the mounting hooks over the display plate. Ensure that the display

mounting bracket arms and the display are secure before stepping away

from the cart.

Mounting Hooks

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

Slide the mounting hooks over the display plate Mount the Camera

To mount the Huddly IQ camera:

1. Open the hinge on the bottom of the camera.

2. Set the camera atop the display and hook the lip to the front edge of

the display.

3. Adjust the hinge until the camera sits atop the display.

Mount the Crestron Mercury Device

To mount the Crestron Mercury device, place the device on the

preinstalled device mounting shelf.

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

Completed Installation

Once complete, the installation will appear as shown below. Configuration

Microsoft Teams Devices

To configure the R-Series mobile UC system that utilizes Microsoft

Teams software (UC-FCM-T), refer to the instructions below.

Apply Power

Press the power button on the bottom of the UC Engine (attached to the

UC bracket assembly) and apply power to all of the other devices in the

system.

Configure the Crestron Mercury Device

To configure the Crestron Mercury Device:

1. Tap Teams Video and then tap OK. The device will reboot.

2. On a computer, open a web browser to the IP address displayed on the

Crestron Mercury X device to configure the device to operate in Teams

Video mode.

NOTES:

lThe Crestron Mercury device and computer must be on the same

network switch and VLAN.

lA login with administrative rights for the Crestron Mercury device

is required.

3. Log in to the Crestron Mercury device and navigate to DEVICE >

Applications.

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

4. Enter the following information in the appropriate fields:

lTeams Video PC Address: Enter the IP address or hostname of

the UC Engine.

lNOTES:

oThe UC Engine's IP address can be found using the device

discovery tool in Crestron Toolbox™ software.

oThe hostname is printed on a label affixed to the UC Engine

(mounted on the bracket assembly). To view the label, open

the cart's rear door and locate the UC Engine preattached

near the top of the cart's interior.

lTeams Video PC Port: By default, port number 49500 is used. If

a different port number has been configured on the UC Engine,

enter that port number instead.

lTeams Video Username: Enter the login username for the UC

Engine. (The default username is “admin”.)

lTeams Video Password: Enter the login password for the UC

Engine. (The default password is “sfb”.)

5. Click Save Changes.

For more information, refer to the CCS-UC-1 Product Manual (Doc.

7844).

Configure the System

Use the Crestron Mercury device and your Microsoft Teams or Skype®

account credentials to configure the UC Engine. Refer to the Crestron

Flex UC Video Conference Systems Supplemental Guide (Doc. 8360).

Zoom Rooms Devices

To configure the R-Series mobile UC system that utilizes Zoom Rooms

software (UC-FCM-Z), refer to the instructions below.

Apply Power

Press the power button on the bottom of the UC Engine (attached to the

UC bracket assembly) and apply power to all of the other devices in the

system. The connected display device will show a pairing code.

Remove the USB memory drive (CCS-UCA-MEM-USB) from the Crestron

Mercury device. The USB memory drive does not need to be reconnected

once the device has been powered on. Store the USB memory drive in the

event that it is needed for future troubleshooting.

1. Tap Zoom and then tap OK. The device will reboot.

2. Enter the pairing code shown on the display to pair the Crestron

Mercury device with the UC Engine. The Zoom Rooms controller app is

displayed.

3. Log in to the Zoom Rooms service with an activation code or Zoom

Rooms Credentials (email and password).

lActivation Code:

a. Tap Enter Activation Code.

b. Enter the 16-digit activation code provided by the

administrator to activate the Zoom Rooms room that is

assigned to the activation code. The Zoom Rooms

Conference Room screen is shown on the display.

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

lSign In:

a. Tap Sign In.

b. Enter the Zoom Room credentials and tap Sign In.

c. Select the conference room name from the list and

tapNext. The Zoom Rooms Conference Room screen is

shown on the display.

4. Tap Settings. If a password is required, enter the password (default is

0000). The Settings screen is displayed.

5. Tap Microphone and select the Crestron Mercury device as the source.

6. Tap Speaker and select the Crestron Mercury device as the source.

7. Tap Meet Now to exit.

Configure the System

Connect a USBkeyboard and mouse (not included) to a USBport on the

UC Engine to configure system features. Refer to the Crestron Flex UC

Video Conference Systems Supplemental Guide (Doc. 8360).

Universal Devices

To configure the universal R-Series mobile UC system (UC-FCM-U), refer

to the CCS-UC-1 Product Manual (Doc. 7844).

Visit the Product Page

Scan the QR code to visit the product page.

UC-FCM-T

www.crestron.com/model/6511538

UC-FCM-Z

www.crestron.com/model/6511539

UC-FCM-U

www.crestron.com/model/6511561

UC-FCM Series QuickStart

Crestron Flex R-Series Mobile UC Systems

Other manuals for Flex R Series

This manual suits for next models

Table of contents

Other Crestron Outdoor Cart manuals

Crestron

Crestron Flex R Series User manual

Popular Outdoor Cart manuals by other brands

Costway

Costway TH10057 manual

Vivo

Vivo CART-PC02S instruction manual

Ergotron

Ergotron STYLEVIEW SV42-3162-1 quick reference

VEVOR

VEVOR SC01 quick start guide

Carts Vermont

Carts Vermont 20 manual

Vivo

Vivo CART-PC01 instruction manual

Costway

Costway TL0400 user manual

XPOtool

XPOtool 30261 user manual

Branick

Branick 130 Installation, Operation & Repair Parts Information

Anthro

Anthro PrinterCart Assembly instructions

Westward

Westward 2CZY4 Operating instructions and parts manual

Hupfer

Hupfer TTW/V operating instructions

Gorilla Carts

Gorilla Carts GCR-10P quick start guide

Numatic

Numatic EcoMatic EM-5 Assembly

Bosch

Bosch XL-Cart Operating/safety instructions

Tennsco

Tennsco Modular Cart Top Component Assembly Assembly Instructions/Parts Manual

Makita

Makita DCU601 instruction manual

Clam

Clam POLAR TRAILER HD MAX manual