Crestron HD-DA-2-QUAD User manual

The Crestron® HD-DA-2-QUAD is a single rack space unit containing four

independent 1-to-2 HDMI® distribution amplifiers. It is designed for

splitting up to four HDMI, DVI, or DisplayPort™ Multimode signals to feed

separate displays or processors, and is ideal for adding “loop-through”

capability to the inputs of a Crestron DVPHD Digital Video Processor. The

HD-DA-2-QUAD supports HDMI with Deep Color and HDCP, handling

1080p60 HDTV and WUXGA computer resolutions, and multichannel HD

lossless audio.

In the Box

1 HD-DA-2-QUAD, Quad 1-to-2 HDMI Distribution Amplifier

Additional Items

2 Bracket, Rack Ear, 1U (2004208)

1 Connector, 2-Pin (2003574)

4 Foot, 0.5 in. x 0.5 in. x 0.23 in., Adhesive (2002389)

1 Cable, Power, 5 ft 10 in. (1.8 m) (2042043)

1 Power Pack, 24 VDC, 2.5 A, 100-240 VAC (2045873)

Install the Device

The HD-DA-2-QUAD can be mounted into a rack or placed on a flat

surface.

Mount into a Rack

The HD-DA-2-QUAD occupies 1U of rack space. Use the three screws

from the front part of each side panel, and a #1 or #2 Phillips screwdriver

to attach the two included rack ears to the device, as shown in the

following illustration. Then mount the device into the rack using four

mounting screws (not included).

Rack Mounting Safety Precautions

Elevated Operating Ambient Temperature: If installed in a closed or

multi-unit rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient temperature. Therefore,

consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature (Tma)

specified by the manufacturer.

Reduced Airflow: Installation of the equipment in a rack should be such

that the amount of airflow required for safe operation of the equipment

is not compromised.

HD-DA-2-QUAD QuickStart

Quad 1-to-2 HDMI® Distribution Amplifier

Mechanical Loading: Mounting of the equipment in the rack should be

such that a hazardous condition is not achieved due to uneven mechanical

Circuit Overloading: Consideration should be given to the connection of

the equipment to the supply circuit and the effect that overloading of the

circuits might have on overcurrent protection and supply wiring.

Appropriate consideration of equipment nameplate ratings should be

used when addressing this concern.

Reliable Earthing: Reliable earthing of rack-mounted equipment should be

maintained. Particular attention should be given to supply connections

other than direct connections to the branch circuit (e.g., use of power

strips).

Place on a Flat Surface

Attach the included feet near the corners on the underside of the

HD-DA-2-QUAD before placing it onto a flat surface or stacking it with

other equipment.

HD-DA-2-QUAD QuickStart

Quad 1-to-2 HDMI® Distribution Amplifier

Connect the Device

Connect the HD-DA-2-QUAD as called out in the following illustration.

Connect power last.

* The device may be powered by the included 24 VDC power pack or Cresnet network

power, but not both.

HD-DA-2-QUAD QuickStart

Quad 1-to-2 HDMI® Distribution Amplifier

Visit the Product Page

Scan the QR code to visit the product page.

HD-DA-2-QUAD

www.crestron.com/model/6502439

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of

Crestron Electronics, Inc. in the United States and/or other countries. HDMI and the

HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in

the United States and/or other countries. DisplayPort is either a trademark or

registered trademark of Video Electronics Standards Association in the United States

and/or other countries. Other trademarks, registered trademarks, and trade names

may be used in this document to refer to either the entities claiming the marks and

names or their products. Crestron disclaims any proprietary interest in the marks and

names of others. Crestron is not responsible for errors in typography or photography.

Doc. 6713C

05/08/20

HD-DA-2-QUAD QuickStart

Quad 1-to-2 HDMI® Distribution Amplifier

Other manuals for HD-DA-2-QUAD

Other Crestron Amplifier manuals

Crestron

Crestron AMP-8075 User manual

Crestron

Crestron DM NAX DM-NAX-4ZSP User manual

Crestron

Crestron QuickMedia QM-MD8X8 User manual

Crestron

Crestron C2NI-AMP-4X100 User manual

Crestron

Crestron HD-DA-2 User manual

Crestron

Crestron AMP-225 Dimensional drawing

Crestron

Crestron CNAMPX-7X200 User manual

Crestron

Crestron MP-AMP40-70/100V How to use

Crestron

Crestron X Series User manual

Crestron

Crestron DM-NAX-AMP-X300 User manual

Crestron

Crestron QuickMedia QM-DA-2 User manual

Crestron

Crestron AMP-8075 User manual

Crestron

Crestron X Series User manual

Crestron

Crestron QM-AMP3x80 Series User manual

Crestron

Crestron AMP-8075 User manual

Crestron

Crestron PROAMP(I)-7X250 User manual

Crestron

Crestron CNAMPX-12X60 User manual

Crestron

Crestron PROCISE PROAMPI-7X400 User manual

Crestron

Crestron DM-NAX-8ZSA User manual

Crestron

Crestron PROCISE PROAMPI-7X400 User manual

Crestron

Crestron C2-AUDIO-6PAK User manual

Crestron

Crestron AMP-2800 User manual

Crestron

Crestron AMP-150-70 Dimensional drawing

Crestron

Crestron AMP-2800 User manual

Popular Amplifier manuals by other brands

ASTRO

ASTRO HVO V40 P operating manual

Marantz

Marantz SUPERSCOPE BLA-545 Service data

NAD

NAD CI980 Quick setup guide

Technics

Technics SE-CH770 Service manual

Harman Kardon

Harman Kardon HK6300 instruction manual

NAD

NAD T975 owner's manual

McIntosh

McIntosh MA6850 Brochure & specs

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N manual

Viatron

Viatron Autrix Technical manual

GME

GME GA9800 instruction manual

Atlas

Atlas CP700 Specification sheet

Roland

Roland KC-1000 owner's manual

Pyle

Pyle PFMRA350BW user manual

Advantage

Advantage S-250 manual

IRT Electronics

IRT Electronics DVA-3007 manual

Dimavery

Dimavery BA-100 Series user manual

Sony

Sony XM-S400D operating instructions

Schertler

Schertler ROY X quick guide