Creative XP GlassRaven User manual
3
Table of Contents
1. Introduction
2. Quick Start
3. Technical Specifications
4. Warranty
5. The Complete Hunter Kit
.............................................................................................4
.........................................................................................6-13
...................................................................14
............................................................................................15-16
...........................................................17-30
TABLE OF CONTENTS
4
Introduction
Thank you for purchasing your new CREATIVE XP® GlassRaven WiFi Trail
Camera which can send instant HD photos to your email address or phone
number.
We are an American family-owned business and you can contact us via
email (support@creative-xp.com), our website (www.creative-xp.com) or
phone (+1 646 450 6330). If you are not happy with the GlassRaven in any
way, please contact us and we will assist to the best of our ability.
Also, you can watch our YouTube Tutorial Videos (Channel Name:
CREATIVE XP) if you need additional instructions on using the
trail camera.
We are always happy to help!
THE AMERICAN WAY
OF ADVENTURE
6
Quick Start
How to Get the Camera Ready
1. DOWNLOAD AND INSTALL THE “WiFi Hunting Camera” APP.
Go to your Apple App Store or Android Play Store and search for the “WiFi
Hunting Camera” App:
1.1 You can also download and install the “WiFi Hunting Camera” APP by
scanning one of the QR codes below (choose the correct QR code depending
on your smartphone):
Apple App Store Android Play Store
7
Quick Start
After you scan the QR code using the phone camera or a QR code scanning
app -> CLICK on the “View in App Store” text that pops up on your phone
screen (the screenshot is just an example for the Apple App Store):
2. INSERT THE TWO RECHARGEABLE 18650 BATTERIES WITH THE
CORRECT POLARITY.
Both batteries must go in with the MINUS (-) sign DOWN (the negative or
"flat" end against the long spring of each battery slot) and the PLUS (+)
sign UP.
Note: Please remove batteries when item is not in use for extended periods of
time. It extends battery life and prevents possible battery leakage or corrosion.
8
Quick Start
3. CHECK MEMORY CARD.
Ensure that the provided 32GB SD memory card is in the camera’s “TF Card”
slot. You do not need to remove it, only make sure it is inserted into its slot.
*Please check the photo attached below for more information:
1
2 3 4
5
1. 18650 Battery Compartment
2. Power Switch ON/OFF
3. TF Card
4. Mini USB Port
5. Push Here to Open the Battery Cover
9
Quick Start
4. POWER ON THE CAMERA
Push the power switch from OFF to ON. The camera must have the SD
memory card inserted into its slot, and the two 18650 rechargeable batteries
inserted with the correct polarity into their compartment in order to power on.
5. TURN THE CAMERA WI-FI FEATURE ON
In the camera box, there is a Wi-Fi Remote Control as shown in the photo
below. LONG PRESS the red ON button for 7-10 seconds to turn ON the
Camera Wi-Fi feature.
Note: The camera has its own Wi-Fi network. You do NOT need to be close to
your home or an external Wi-Fi router:
Switch Wi-Fi ON
Switch Wi-Fi OFF
Once the power switch is ON, the red indicator light of the camera will flash 6
times and then go out, and the camera will enter the “PIR Motion Detection”
Mode. In this mode, the camera will take photos or videos when the motion
sensor detects human or animal movement in front of the camera. Keep going!
10
Quick Start
While you are holding the red ON button, the Wi-Fi red light on the remote
control will flash quickly until the camera’s red light will start flashing quickly
as well:
6. CONNECT YOUR PHONE TO THE CAMERA’S WI-FI NETWORK
Now, go to your phone’s “Wi-Fi” section -> find the camera’s Wi-Fi network
name – it starts with “PR300WIFI…” – and click on it to connect. Insert the
password “12345678”.
Note: The Camera Wi-Fi feature is ON when the camera’s red light will start
flashing quickly.
Remote Control Red Light Trail Camera Red Light
Wi-Fi network name = it starts with “PR300WIFI…”
Wi-Fi network password = 12345678
Note: After your phone is connected to the camera’s Wi-Fi network, the
camera’s red light will stay on and STOP flashing.
8. CONNECT THE PHONE APP TO THE CAMERA.
After your phone is connected to the camera’s Wi-Fi network, open the
“Wifi Hunting Camera” APP on your phone and click on the PLUS sign “ ”
to access the camera. Now, you should be able to see on your phone the
real-time content of what the camera is capturing. The camera’s red light will
now turn o.
11
Quick Start
