CPR Callblocker V.106 User manual

Other CPR Callblocker Telephone Accessories manuals

CPR Callblocker

CPR Callblocker Shield User manual

CPR Callblocker

CPR Callblocker Protect+ User manual

CPR Callblocker

CPR Callblocker V202 User manual

Popular Telephone Accessories manuals by other brands

IAI

IAI CON-T operating manual

BT

BT DIVERSE 5400 user guide

Tadiran Telecom

Tadiran Telecom EMERALD ICE installation manual

Musicam

Musicam FieldFone II user guide

Polycom

Polycom KIRK KIRK 4040 Features guide

TIPTEL

TIPTEL DECT Set 50 user manual

Panasonic

Panasonic KX-UDS124 installation guide

BT

BT BT7600 Quick setup and user guide

Panasonic

Panasonic KX-TVP100E Guide

View

View VP-PC installation guide

Baldwin Boxall

Baldwin Boxall BT8 operating instructions

SMC Networks

SMC Networks SMCDPCR-AP specification

SkyLink

SkyLink SD-001 user manual

Nera

Nera ISDN user guide

MCheeta

MCheeta CT-CID803 Plus user manual

YASKAWA

YASKAWA YRC1000 instructions

Intellitouch

Intellitouch MOH-500E Specifications

Viking

Viking SQRG-12 Technical practice

www.cprcallblocker.com

USER GUIDE

V.106

®

Thank you

for purchasing CPR Call Blocker.

You are now in control of your privacy.

The CPR Team

INTRODUCTION 1

Congratulations on your new purchase!

Before using this user guide please read the following important information:-

• Call Blocker protects a single corded phone, or a cordless phone with additional handsets

• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker

to work eectively.

• Caller ID is telephone service that provides for subscribers the telephone number of a

caller, which appear on a display as the call is being received. It is available from most

telephone companies. To register for Caller ID contact your telephone operator - Caller ID is

available free with BT and most other providers, just dial 150 to nd out.

• The CPR Call Blocker will work with a wide range of telephone equipment including corded

and cordless phones. It protects all the phones that are plugged into it. If you need a

number of extensions in your house we recommend that you use a modern multi-handset

cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then

protect all your phones.

• We recommend that you do not use the CPR Call Blocker with phones plugged into other

extension sockets in your house. This might cause other phones to ring once if a blocked

number is calling.

• Some phones automatically check the 1571 network voicemail service at regular intervals

and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you

do not use 1571 phones with The CPR Call Blocker

Congratulations on your new purchase!

Before using this user guide please read the following important information:-

• Call Blocker protects a single corded phone, or a cordless phone with additional handsets

• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker

to work eectively.

• Caller ID is telephone service that provides for subscribers the telephone number of a

caller, which appear on a display as the call is being received. It is available from most

telephone companies. To register for Caller ID contact your telephone operator - Caller ID is

available free with BT and most other providers, just dial 150 to nd out.

• The CPR Call Blocker will work with a wide range of telephone equipment including corded

and cordless phones. It protects all the phones that are plugged into it. If you need a

number of extensions in your house we recommend that you use a modern multi-handset

cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then

protect all your phones.

• We recommend that you do not use the CPR Call Blocker with phones plugged into other

extension sockets in your house. This might cause other phones to ring once if a blocked

number is calling.

• Some phones automatically check the 1571 network voicemail service at regular intervals

and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you

do not use 1571 phones with The CPR Call Blocker

SETTING UP

CPR CALL BLOCKER

02.

Step 1

Remove the line cable from your telephone and plug into the LINE 1 port of the Call

Blocker.

Step 2

Use the small Black cable provided to connect the TEL 1 port to your telephone

Step 3

Insure all cables are connected securely

The Call Blocker is setup correctly when there is a red light displayed on the top of the

unit when the phone is oﬀ the receiver or when on a call. If you are using a cordless

phone press the Call Button for a dial tone.

If you have no dial tone or no red light when on a call you will need to disconnect the

cables then reconnect using the LINE 2 and TEL 2 ports.

Step 1

Remove the line cable from your telephone and plug into the LINE 1 port of the Call

Blocker.

Step 2

Use the small Black cable provided to connect the TEL 1 port to your telephone

Step 3

Insure all cables are connected securely

The Call Blocker is setup correctly when there is a red light displayed on the top of the

unit when the phone is oﬀ the receiver or when on a call. If you are using a cordless

phone press the Call Button for a dial tone.

If you have no dial tone or no red light when on a call you will need to disconnect the

cables then reconnect using the LINE 2 and TEL 2 ports.

12

Disconnect line cable from

your telephone and plug into

the LINE 1 port of the

Call Blocker

Congratulations on your new purchase!

Before using this user guide please read the following important information:-

• Call Blocker protects a single corded phone, or a cordless phone with additional handsets

• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker

to work eectively.

• Caller ID is telephone service that provides for subscribers the telephone number of a

caller, which appear on a display as the call is being received. It is available from most

telephone companies. To register for Caller ID contact your telephone operator - Caller ID is

available free with BT and most other providers, just dial 150 to nd out.

• The CPR Call Blocker will work with a wide range of telephone equipment including corded

and cordless phones. It protects all the phones that are plugged into it. If you need a

number of extensions in your house we recommend that you use a modern multi-handset

cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then

protect all your phones.

• We recommend that you do not use the CPR Call Blocker with phones plugged into other

extension sockets in your house. This might cause other phones to ring once if a blocked

number is calling.

• Some phones automatically check the 1571 network voicemail service at regular intervals

and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you

do not use 1571 phones with The CPR Call Blocker

Congratulations on your new purchase!

Before using this user guide please read the following important information:-

• Call Blocker protects a single corded phone, or a cordless phone with additional handsets

• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker

to work eectively.

• Caller ID is telephone service that provides for subscribers the telephone number of a

caller, which appear on a display as the call is being received. It is available from most

telephone companies. To register for Caller ID contact your telephone operator - Caller ID is

available free with BT and most other providers, just dial 150 to nd out.

• The CPR Call Blocker will work with a wide range of telephone equipment including corded

and cordless phones. It protects all the phones that are plugged into it. If you need a

number of extensions in your house we recommend that you use a modern multi-handset

cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then

protect all your phones.

• We recommend that you do not use the CPR Call Blocker with phones plugged into other

extension sockets in your house. This might cause other phones to ring once if a blocked

number is calling.

• Some phones automatically check the 1571 network voicemail service at regular intervals

and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you

do not use 1571 phones with The CPR Call Blocker

The easiest way to block Nuisance Callers is to use the BLOCK NOW button located on

the top of the Call Blocker.

When a Nuisance Caller gets through press the ‘BLOCK NOW’ button and then hang up

the call, this Caller will now be blocked from calling again.

You can also use this function without having to answer the phone.

For example: If an unfamiliar number is calling, press the BLOCK NOW button and the

CPR Call Blocker will stop that number from calling again.

The Block Now Button only works with Visible numbers. If you are receiving nuisance

calls from ‘WITHHELD’ or ‘INTERNATIONAL’ numbers please use the programming codes

on pages 5 and 6.

The easiest way to block Nuisance Callers is to use the BLOCK NOW button located on

the top of the Call Blocker.

When a Nuisance Caller gets through press the ‘BLOCK NOW’ button and then hang up

the call, this Caller will now be blocked from calling again.

You can also use this function without having to answer the phone.

For example: If an unfamiliar number is calling, press the BLOCK NOW button and the

CPR Call Blocker will stop that number from calling again.

The Block Now Button only works with Visible numbers. If you are receiving nuisance

calls from ‘WITHHELD’ or ‘INTERNATIONAL’ numbers please use the programming codes

on pages 5 and 6.

Step 1

Remove the line cable from your telephone and plug into the LINE 1 port of the Call

Blocker.

Step 2

Use the small Black cable provided to connect the TEL 1 port to your telephone

Step 3

Insure all cables are connected securely

The Call Blocker is setup correctly when there is a red light displayed on the top of the

unit when the phone is oﬀ the receiver or when on a call. If you are using a cordless

phone press the Call Button for a dial tone.

If you have no dial tone or no red light when on a call you will need to disconnect the

cables then reconnect using the LINE 2 and TEL 2 ports.

Step 1

Remove the line cable from your telephone and plug into the LINE 1 port of the Call

Blocker.

Step 2

Use the small Black cable provided to connect the TEL 1 port to your telephone

Step 3

Insure all cables are connected securely

The Call Blocker is setup correctly when there is a red light displayed on the top of the

unit when the phone is oﬀ the receiver or when on a call. If you are using a cordless

phone press the Call Button for a dial tone.

If you have no dial tone or no red light when on a call you will need to disconnect the

cables then reconnect using the LINE 2 and TEL 2 ports.

INSTALLATION

DIAGRAM

line Cable

Short Black

Cable Provided

Telephone

BLOCK NOW

23

Main Wall

Socket

Programming a number into "Blocking" list

1. Pick up the telephone and input * *7 # you will hear a "Beep”

2. Then enter the telephone number you wish to block, followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Enter the next number or hang up to complete setup.

Programming an area code into "Blocking" list

1. Pick up the telephone and input * * 7 # you will hear a "Beep”

2. Then enter the area code you wish to block, followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Enter the next area code or hang up to complete setup.

Erasing one number or area code from the "Blocking" list

1. Pick up the telephone and input * * 6 # you will hear a ‘Beep’

2. Then enter the telephone number you wish to delete followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Hang up to complete setup.

Programming a number into "Blocking" list

1. Pick up the telephone and input * *7 # you will hear a "Beep”

2. Then enter the telephone number you wish to block, followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Enter the next number or hang up to complete setup.

Programming an area code into "Blocking" list

1. Pick up the telephone and input * * 7 # you will hear a "Beep”

2. Then enter the area code you wish to block, followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Enter the next area code or hang up to complete setup.

Erasing one number or area code from the "Blocking" list

1. Pick up the telephone and input * * 6 # you will hear a ‘Beep’

2. Then enter the telephone number you wish to delete followed by the # key,

You will hear a ‘beep’ after each # to conrm success.

3. Hang up to complete setup.

PROGRAMMING

CODES

Telephone

34

All programming codes can but turned ON or OFF, they come turned OFF as defaultAll programming codes can but turned ON or OFF, they come turned OFF as default

5

PROGRAMMING

CODES

Block Last Calling Number

1. To block last number: Get a dial tone and input * * 2 # * 2 #

You will hear a ‘beep’ after each # to conrm success.

Turning Call Blocker On and Oﬀ

1. To Turn On: Get a dial tone and input * * 4 # *4#

2. To Turn Oﬀ : Get a dial tone and input * * 3 # *3#

You will hear a ‘beep’ after each # to conrm success.

Blocking all “Withheld” Callers

1. To Turn On: Get a dial tone and input * * 7 # 7*#

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 7*#

You will hear a ‘beep’ after each # to conrm success.

Alternative “Withheld” blocking function ( Use this if the conventional code doesn’t work)

1. To Turn On: Get a dial tone and input * * 7 # #

2. To Turn Oﬀ : Get a dial tone and input * * 6 # #

You will hear a ‘beep’ after each # to conrm success.

Block Last Calling Number

1. To block last number: Get a dial tone and input * * 2 # * 2 #

You will hear a ‘beep’ after each # to conrm success.

Turning Call Blocker On and Oﬀ

1. To Turn On: Get a dial tone and input * * 4 # *4#

2. To Turn Oﬀ : Get a dial tone and input * * 3 # *3#

You will hear a ‘beep’ after each # to conrm success.

Blocking all “Withheld” Callers

1. To Turn On: Get a dial tone and input * * 7 # 7*#

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 7*#

You will hear a ‘beep’ after each # to conrm success.

Alternative “Withheld” blocking function ( Use this if the conventional code doesn’t work)

1. To Turn On: Get a dial tone and input * * 7 # #

2. To Turn Oﬀ : Get a dial tone and input * * 6 # #

You will hear a ‘beep’ after each # to conrm success.

PROGRAMMING

CODES

Blocking all “International” Callers

1. To Turn On: Get a dial tone and input * * 7 # * #

2. To Turn Oﬀ : Get a dial tone and input * * 6 # * #

You will hear a ‘beep’ after each # to conrm success.

Blocking all IP Dialling systems (skype / overseas nuisance call centres)

1. To Turn On: Get a dial tone and input * * 7 # 6*#

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 6*#

You will hear a ‘beep’ after each # to conrm success.

Blocking all “0” type calls (Single digit spoof callers)

1. To Turn On: Get a dial tone and input * * 7 # 0#

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 0#

You will hear a ‘beep’ after each # to conrm success.

Resetting the Call Blocker back to factory settings

1. Get a dial tone and input ** 1 # * 1 #

You will hear a ‘beep’ after each # to conrm success.

Note: Three "Beeps” indicated that an error has occurred - Either the number has

already been entered or the specied blocking function is already turned ON.

Blocking all “International” Callers

1. To Turn On: Get a dial tone and input * * 7 # * #

2. To Turn Oﬀ : Get a dial tone and input * * 6 # * #

You will hear a ‘beep’ after each # to conrm success.

Blocking all IP Dialling systems (skype / overseas nuisance call centres)

1. To Turn On: Get a dial tone and input * * 7 # 6*#

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 6*#

You will hear a ‘beep’ after each # to conrm success.

Blocking all “0” type calls (Single digit spoof callers)

1. To Turn On: Get a dial tone and input * * 7 # 0#

2. To Turn Oﬀ : Get a dial tone and input * * 6 # 0#

You will hear a ‘beep’ after each # to conrm success.

Resetting the Call Blocker back to factory settings

1. Get a dial tone and input ** 1 # * 1 #

You will hear a ‘beep’ after each # to conrm success.

Note: Three "Beeps” indicated that an error has occurred - Either the number has

already been entered or the specied blocking function is already turned ON.

6

7

Q. Will the CPR Call Blocker work with my broadband?

A. The CPR Call Blocker will work ne alongside your broadband connection - But it is

important to use broadband Filters at the wall socket.

Q. How much power does the CPR Call Blocker use?

A. The CPR Call Blocker uses only the power from your telephone line which is of no cost

to you!

Q. Which landline providers does the CPR Call Blocker support?

A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin

Q. Do I need caller ID for this product to work?

A. Yes. Caller ID should be enabled on your telephone line for the product to work

eﬀectively. Caller ID Display is available free for BT customers

Q. Can I use any telephone with the CPR Call Blocker?

A. The CPR Call Blocker will work with a wide range of modern telephone equipment -

cordless DECT phones, cordless analogue phones.

Q. Can I use the CPR Call Blocker with extension telephone sockets?

A. The CPR Call Blocker is designed to work on one telephone socket. If you want

additional phones around the home it is best to use a DECT phone with multiple

cordless handsets. The Call Blocker will then be connected to the base unit and help

protect the additional DECT handsets.

Q. Will the CPR Call Blocker work with my broadband?

A. The CPR Call Blocker will work ne alongside your broadband connection - But it is

important to use broadband Filters at the wall socket.

Q. How much power does the CPR Call Blocker use?

A. The CPR Call Blocker uses only the power from your telephone line which is of no cost

to you!

Q. Which landline providers does the CPR Call Blocker support?

A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin

Q. Do I need caller ID for this product to work?

A. Yes. Caller ID should be enabled on your telephone line for the product to work

eﬀectively. Caller ID Display is available free for BT customers

Q. Can I use any telephone with the CPR Call Blocker?

A. The CPR Call Blocker will work with a wide range of modern telephone equipment -

cordless DECT phones, cordless analogue phones.

Q. Can I use the CPR Call Blocker with extension telephone sockets?

A. The CPR Call Blocker is designed to work on one telephone socket. If you want

additional phones around the home it is best to use a DECT phone with multiple

cordless handsets. The Call Blocker will then be connected to the base unit and help

protect the additional DECT handsets.

Safety

• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive

cleaning products.

• Do not open CPR Call Blocker as there are voltages inside the unit.

Environmental

• CPR Call Blocker is intended for indoor use only.

• Do not submerge any part of CPR Call Blocker in water and do not use it in

damp or humid conditions, such as in bathrooms.

• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.

• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.

We recommend that you unplug the telephone line cord for the duration of the storm

as such damage is not covered by the guarantee.

Data Protection

We are registered under the Data Protection Act 1998 (registration Z2140320 ).

The data controller is CPR Global Limited of York Chambers,

York Street, Swansea , SA1 3LZ

We will process personal data disclosed by you in accordance with

our privacy policy published on our web site (www.cprcallblocker.com)

Safety

• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive

cleaning products.

• Do not open CPR Call Blocker as there are voltages inside the unit.

Environmental

• CPR Call Blocker is intended for indoor use only.

• Do not submerge any part of CPR Call Blocker in water and do not use it in

damp or humid conditions, such as in bathrooms.

• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.

• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.

We recommend that you unplug the telephone line cord for the duration of the storm

as such damage is not covered by the guarantee.

Data Protection

We are registered under the Data Protection Act 1998 (registration Z2140320 ).

The data controller is CPR Global Limited of York Chambers,

York Street, Swansea , SA1 3LZ

We will process personal data disclosed by you in accordance with

our privacy policy published on our web site (www.cprcallblocker.com)

FREQUENTLY ASKED QUESTIONS 7

Q. Will the CPR Call Blocker work with my broadband?

A. The CPR Call Blocker will work ne alongside your broadband connection - But it is

important to use broadband Filters at the wall socket.

Q. How much power does the CPR Call Blocker use?

A. The CPR Call Blocker uses only the power from your telephone line which is of no cost

to you!

Q. Which landline providers does the CPR Call Blocker support?

A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin

Q. Do I need caller ID for this product to work?

A. Yes. Caller ID should be enabled on your telephone line for the product to work

eﬀectively. Caller ID Display is available free for BT customers

Q. Can I use any telephone with the CPR Call Blocker?

A. The CPR Call Blocker will work with a wide range of modern telephone equipment -

cordless DECT phones, cordless analogue phones.

Q. Can I use the CPR Call Blocker with extension telephone sockets?

A. The CPR Call Blocker is designed to work on one telephone socket. If you want

additional phones around the home it is best to use a DECT phone with multiple

cordless handsets. The Call Blocker will then be connected to the base unit and help

protect the additional DECT handsets.

Q. Will the CPR Call Blocker work with my broadband?

A. The CPR Call Blocker will work ne alongside your broadband connection - But it is

important to use broadband Filters at the wall socket.

Q. How much power does the CPR Call Blocker use?

A. The CPR Call Blocker uses only the power from your telephone line which is of no cost

to you!

Q. Which landline providers does the CPR Call Blocker support?

A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin

Q. Do I need caller ID for this product to work?

A. Yes. Caller ID should be enabled on your telephone line for the product to work

eﬀectively. Caller ID Display is available free for BT customers

Q. Can I use any telephone with the CPR Call Blocker?

A. The CPR Call Blocker will work with a wide range of modern telephone equipment -

cordless DECT phones, cordless analogue phones.

Q. Can I use the CPR Call Blocker with extension telephone sockets?

A. The CPR Call Blocker is designed to work on one telephone socket. If you want

additional phones around the home it is best to use a DECT phone with multiple

cordless handsets. The Call Blocker will then be connected to the base unit and help

protect the additional DECT handsets.

Safety

• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive

cleaning products.

• Do not open CPR Call Blocker as there are voltages inside the unit.

Environmental

• CPR Call Blocker is intended for indoor use only.

• Do not submerge any part of CPR Call Blocker in water and do not use it in

damp or humid conditions, such as in bathrooms.

• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.

• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.

We recommend that you unplug the telephone line cord for the duration of the storm

as such damage is not covered by the guarantee.

Data Protection

We are registered under the Data Protection Act 1998 (registration Z2140320 ).

The data controller is CPR Global Limited of York Chambers,

York Street, Swansea , SA1 3LZ

We will process personal data disclosed by you in accordance with

our privacy policy published on our web site (www.cprcallblocker.com)

Safety

• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive

cleaning products.

• Do not open CPR Call Blocker as there are voltages inside the unit.

Environmental

• CPR Call Blocker is intended for indoor use only.

• Do not submerge any part of CPR Call Blocker in water and do not use it in

damp or humid conditions, such as in bathrooms.

• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.

• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.

We recommend that you unplug the telephone line cord for the duration of the storm

as such damage is not covered by the guarantee.

Data Protection

We are registered under the Data Protection Act 1998 (registration Z2140320 ).

The data controller is CPR Global Limited of York Chambers,

York Street, Swansea , SA1 3LZ

We will process personal data disclosed by you in accordance with

our privacy policy published on our web site (www.cprcallblocker.com)

GENERAL INFORMATION 8