Cover CR-V01 User manual
CR-V01K
All-in-one cleaning
& air purifying robot
SERVICE HOTLINE：1-888-566 6736
Or visit : www.COVERproducts.com/support/
Please read this user manual thoroughly before operating the product & retain this document for
future reference
This product is for indoor use only. Store and operate in room temperature only
USER MANUAL
2
Contents
General Safety Instructions......................................................................................................................3
Content....................................................................................................................................................5
Features..................................................................................................................................................6
Robot Top (without Air Purifier)..................................................................................................6
Bottom.......................................................................................................................................6
Setup.......................................................................................................................................................7
Setup Home Base .....................................................................................................................7
Docking Test .............................................................................................................................7
Battery installation.....................................................................................................................7
Battery removal .........................................................................................................................8
Virtual Wall................................................................................................................................8
Basic Operation.....................................................................................................................................10
Robot Panel.............................................................................................................................10
Remote Control .....................................................................................................................................12
Schedule Setting ...................................................................................................................................13
Maintenance..........................................................................................................................................14
Dust Bin and Filter Basic Cleaning ..........................................................................................14
Deep Cleaning.........................................................................................................................14
Side Brushes...........................................................................................................................15
Rolling Brush...........................................................................................................................15
Air Purifier Module.................................................................................................................................16
Control Panel...........................................................................................................................16
Features..................................................................................................................................16
Installing Purifier to Cleaning Robot.........................................................................................17
Purifier Filter Replacement......................................................................................................17
Mopping Module Replacement..............................................................................................................18
Damp Mop Module ................................................................................................................................19
Install Mopping Cloth on Damp Mop Module ...........................................................................19
Install Damp Mop Base on Robot............................................................................................19
Useful Tips ............................................................................................................................................20
Troubleshooting.....................................................................................................................................23
Specification..........................................................................................................................................23
Warranty Statement...............................................................................................................................24
IMPORTANT SAFETY INSTRUCTIONS
3
General Safety Instructions
THE USERS OF THIS APPLIANCE SHOULD HAVE FULL KNOWLEDGE OF THE SAFETY
INSTRUCTIONS AND UNDERSTAND THE POSSIBLE RELATED HAZARDS. THIS IS NOT A TOY.
CHILDREN SHOULD NOT USE THIS WITHOUT SUPERVISION OF PARENTS OR ADULTS.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS ROBOT AND ALL
OTHER PARTS TO RAIN OR MOISTURE.
1. Safety Precautions
Please read the following safety and operation instructions thoroughly before you use
this robot
Please retain this manual for future reference
Heed all warnings on the product to prevent any possible hazards or damages such
as fire, short-circuiting or injury
Please follow all safety operations and processes stated in this manual
Please make sure you have full understanding about the safe use of this robot and
related parts
Don not use corrosive cleansers or chemical solvents to clean the product
2. Safety Instructions
This robot is for indoors use only
This robot is NOT a toy. Sitting or standing on this robot is strictly prohibited
Since this robot is an electronic product, never immerse it in water or use it in a moist
or wet environment
Before the robot starts the cleaning process, please tidy up small items, such as
clothing, power cords, cables, and lose fringes of rugs, to prevent any possible jam of
the robot's rolling brush or suction nozzle.
When the robot is working, please pay additional attention to children or pets nearby.
it is highly suggested to keep them away from the robot
This robot is not designed to pick up debris that is still burning, smoking, or wet. Tis
is also strictly prohibited to use this robot to clean up chemical particles or volatile
liquids such like gasoline.
In case the robot is not used for a long period of time, please recharge the battery at
least once every other month and store it in a cool and dry place after it is fully
charged.
IMPORTANT SAFETY INSTRUCTIONS
4
Use only attachments, accessories and spare parts specified by the manufacturer.
Remove the battery from the robot and make sure a ll power is off before you start
cleaning the robot.
Never touch the robot and any other parts, including the battery charger, power plug
and power cord, when your hands are wet.
Warning
Do not look directly into the UV light and do not touch the UV light bulb with
bare hands or any sharp or conductive tools.
The UV light is a permanent fixture. Do not attempt to remove or replace the UV
light.This replacement can only be performed by professional personnel
authorized by themanufacturer.
CONTENT IN PACKAGE
5
Content
1. V01 Vacuum Robot
2. Charging Home Base
3. User Manual
4. Remote Control
5. Virtual Wall
6. Adaptor
7. Battery
8. Spare Parts Box
9. Cleaning Brush
10. Hair Removal Tool
11. Wet Mopping Module
12. Air Purifier (SKU# CR-V01K)
UNDERSTAND THE PRODUCT
6
Features
Robot Top (without Air Purifier)
Bottom
Robotic & Sensing Systems:
Scheduler/Auto Recharging Home
Base
Ultrasonic Obstacle Detection /
Collision Obstacle Detection / Anti-
falling Sensors
Ultrasonic Dust Sensors - perform
detail cleaning with spiral mode on
dirty area
Ultrasonic Virtual Wall - When needed,
use Virtual Wall to limit cleaning area
Cleaning System:
Side Brushes and Focused Suction
Inlet
Floating Roller Brush
Debris Filter & HEPA Filter
UV Light - Exterminate bacteria and
mites
Mop / Damp Mopping Module - for
wood or tile flooring
Air Purifying Module (V01K)
PRODUCT SETUP
7
Setup
Setup Home Base
Position Home-base on
an even floor surface
against wall
Position it at location
with at least a 0.6m (2 ft.)
clearance around
Connect the AC adaptor
to the power socket on
the rear side. Only use
the AC adaptor provided
Always keep the
Recharging Home Based
power plugged in.
Docking Test
Leave the robot on the floor somewhere near the Recharging Home Base.
Press the "Home" button on the remote control.
The robot will return to the Recharging Home Base automatically.
If the robot fails to dock, check the installation process to make the necessary
adjustments to the Recharging Home Base until the robot can dock properly.
Battery installation
Battery is may be installed in robot when purchased
PRODUCT SETUP
8
Battery removal
Pull out dust bin by
pressing dust bin release
button
Push battery hook buttons
simultaneously
Remove battery
Virtual Wall
The Virtual Wall create an invisible barrier that the robot will not cross
Insert the 2 AA rechargeable batteries provided. Make sure batteries in
correct polarity
Turn on Virtual Wall by sliding the power switch
Battery Care
Recharge battery as soon as the robot is used
Keep the robot charged when not in use
If the robot will not be used for a longer period of time, remove
the battery from the robot and store in a cool and dry place
PRODUCT SETUP
9
When turned on, the blue LED will light up for 70 seconds, then the Virtual
Wall turns into waiting mode. When the robot is working, the Virtual Wall
will turn on and show blue LED light.
The LED light will blink when the Virtual Wall battery is running low. The
Virtual Wall can be charged by the robot charging base as below
oPress the slide out the DC plug from charging base (make sure
charging base is set to “ON”)
oPlug in Virtual Wall DC inlet to the DC plug
oWhen charging is complete, LED will glow continuously
When robot is cleaning, position the Virtual Wall at least 3 ft away
from Charging Base, and avoid facing Charging Base directly
The effective distance of Virtual Wall barrier is 10 ft
BASIC OPERATOIN
10
Basic Operation
Robot Panel
Start/Stop Button:
Press to start or stop a work cycle
Solid Blue –working or fully charged when at Charging Base
Blue Pulse –Charging
Red Pulse –Low Battery
Cleaning Timer
8 different cleaning time options are available. Users may also use their
Remote to enter select desired cleaning time (1=10, 2=20… 12=120
mins). Selected during will be shown on the display.
When robot is activated, the default cleaning time will be the time
selected in previous job
Display (Timer, Cleaning Mode, Error Message)
There are 6 cleaning patterns the robot uses in cleaning process. User
may use Remote to select desired pattern
1. Special Bounce
2. Spot Spiral
3. Wall Following
4. Zig-Zag
5. Polygonal Spiral
A. Auto (special sequence of patterns as below)
H. Returning to Charging Base (Home)
When “A” is selected below cleaning pattern will be performed
1
2
3
Other manuals for CR-V01
1
Table of contents
Other Cover Vacuum Cleaner manuals
