Cornelius VANGUARD 245 User manual

IMI CORNELIUS INC. 1996 August 13, 1996

TD243

IMI CORNELIUS INC.

One cornelius Place

Anoka, MN 55303-6234

Telephone (800) 238-3600

Facsimile (612) 422-3246

INSTALLATION MANUAL

FOR

VANGUARD 245 CHILLER

The Vanguard 245 Chiller is for chilling incoming water before it enters the beverage system. It is for use in high

ambient water conditions and high volume beverage locations where additional cooling is required. Pre-chilling

of the water improves the output of the beverage dispensing units.

The unit can sit on the floor or be mounted on the wall with the brackets as shown below. When mounting the

unit on the wall make sure air intake side is not facing the wall. The air exits the top. Make sure nothing is cov-

ering the top to ensure proper operation.

The separate 3-way water manifold should be attached to the 3 water inlets. Inlets 1 and 2 are for water to the

two carbonators on the back room panel or B-I-B stand, which has shut off valves on the panel. Inlet number 3

with a shut off valve and outlet number 3 is a separate circuit to supply chilled water to the ice machine (see

diagram).

The Vanguard 245 Chiller uses mechanical refrigeration in a water bath to chill the coils that the water passes

through.

Specifications

Width 24.5 (62 CM)

Height 31 (79 CM)

Depth 30 (76 CM)

Electrical 220V/50Hz 9.0 Amps or 115V/60Hz 15.0 Amp 20 Amp Circuit

Compressor 3/4 H.P. Refrigerant 404a

Ice Bank 62 lbs. (28 Kgs.)

Shipping Weight 180 lbs. (82 Kgs.)

Operating Weight 245 lbs. ( Kgs.)

23 23

11 1/219

1. Two-inch angle iron, 3 pieces per bracket.

2. Drill 1/2holes, weld all pieces

All manuals and user guides at all-guides.com

all-guides.com

3. Mount brackets on wall and tie together with shelf or bars.

WATER

INLET

VANGUARD 245

CHILLER

10 FEET OF INLET HOSE

3 WAY WATER MANIFOLD

WATER

OUTLET

TO BEVERAGE PANEL

OR BIB STAND

WATER SHUTOFF VALVE

TO ICE MACHINE

1231

231

TOP VIEW

24.5

4. Mount three black brackets to the wall.

5. Install unit on black angle bracket.

6. Install 3 way water manifold to inlet side of the unit (see diagram).

All manuals and user guides at all-guides.com

Other manuals for VANGUARD 245

Table of contents

Other Cornelius Chiller manuals

Cornelius

Cornelius CH750 User manual

Cornelius

Cornelius Energize6 User manual

Cornelius

Cornelius CH1500-CH7500 User manual

Cornelius

Cornelius 75' User manual

Cornelius

Cornelius CH1001-A User manual

Cornelius

Cornelius CH 551 User manual

Cornelius

Cornelius Remcor CH1500-A User manual

Cornelius

Cornelius CH1500 User manual

Cornelius

Cornelius CH750 User manual

Cornelius

Cornelius VANGUARD 245 User manual

Cornelius

Cornelius Chiller ("CH" Series) CH 250 User manual

Cornelius

Cornelius CH Series User manual

Cornelius

Cornelius ENERGIZE 6 User manual

Popular Chiller manuals by other brands

Aqua Optima

Aqua Optima Corona Instructions for use

York

York YGWH 115 Installation, commissioning & operation

Galletti

Galletti PERFORMA MPE Series Technical manual

SMC Networks

SMC Networks HRR Series manual

Daikin

Daikin EWAQ016CAW Installation and operation manual

Trane

Trane CVHE Troubleshooting

Moffat

Moffat Friginox TSR-11SC Specification sheet

Gree

Gree GWH07AGA-K6DNA1C Service manual

Denali

Denali M1 user manual

MP Systems

MP Systems PURGE Series manual

AEC

AEC PCA SERIES Operation and installation manual

Carrier

Carrier AquaEdge 19XRV series Start-up and service instructions

Telemark

Telemark TVP-2000 Operation, installation and service manual

TICA

TICA MINI VRF CHR Series Installation & operation manual

Penguin

Penguin COLD THERAPY CHILLER owner's manual

MAXA

MAXA A68 Installation and operation manual

SABROE

SABROE ChillPAC operating manual

Daikin

Daikin EWWQ-AJYNN Service manual