Core ECLIPSE CR-TS-07-BSC User manual
CORE ECLIPSE 10”
QUICK START GUIDE
PACKAGE CONTENTS
Core Eclipse 10” Touch Panel
Quick Start Guide
Connectors
Screws
DEVICE MODELS: CR-TS-07-BSC and CR-TS-07-KNX
DOCUMENT VERSION: 1.0
PACKAGE CONTENTS
Core Eclipse 10” Touch Panel
Quick Start Guide
Connectors
Screws
DEVICE MODELS: CR-TS-07-BSC and CR-TS-07-KNX
DOCUMENT VERSION: 1.0
PRODUCT OVERVIEW
Core Eclipse is designed as all-in-one controller to meet needs for residential
buildings. It works as smart home controller and monitoring panel, SIP
Intercom Indoor Panel and Security Panel in today’s and tomorrow’s smart
homes.
Smart Home Controller: Eclipse Panel can be connected to multiple interfaces
to control and monitor smart devices from different protocols.
Intercom Indoor Panel: It is compatible with SIP Protocol which is mostly used
communication protocol in IP intercom system. Thus Touch Panel can work as
indoor Intercom Panel in SIP Intercom Networks.
Security Panel: Touch Panel has built-in digital inputs which can be connected
to security sensors. Then Eclipse Panel can work as security panel to satisfy
basic needs for security solutions.
TOP VIEW
FRONT VIEW
touch panel
microphone
lcd
speaker
250.00
53.00 169.00
250.00
169.00
250.00
Eclipse Panel is configured via built-in web interface. It has dual Ethernet
network interfaces which use DHCP by default.
Connect Eclipse Panel to a network that has DHCP server via home or build-
ing network.
Go to Settings in Eclipse Panel user interface and then get IP address of
Eclipse Panel.
Enter IP address to web-browser, then enter username and password
Default username: webAdmin Default password: wa1234
If you need support in further steps, visit www.core.com.tr and check CoreOS
Programming Manual.
1. Power Supply: 12 VDC
2. USB Mini: Reserved for debugging
3. USB-C: Reserved for programming
4. ETH0: Building network. Connection to intercom
clients, smart devices and internet access in building.
5. ETH1: Home network. Connection to smart devices,
intercom clients and internet access at home
6. Outputs (Q1-Q4): 4 x 8A Latching Relay
7. Inputs (I1-I5): Digital Inputs
8. KNX: Connection to KNX-TP bus line
9. RS-485: Connection to RS-485
connected devices
10. RS-232: Connection to R-232
connected device
Note: Core Eclipse is able to connect to two different
IP networks at the same time. This feature allows
to isolate home and building networks in buildings.
REAR VIEW
INSTALLATION
wall
box
wall
box
side front
1. Insert Core Eclipse 10” Inwall Box
Wall Box should be
aligned vertically
In-Wall box sold seperately.
Inwall box dimensions:
170mm x 100mm x 60 mm
CONFIGURATION
1
3
2
4
5
8
10
9
6
7
Manufactured by Kor Ev Otomasyon Sistemleri San.Tic.Ltd.Şti.
Address Fatih Mahallesi Ege Caddesi A2 Blok No:42/5 Gaziemir İzmir Türkiye
Core is trademark of KOR Ev Otomasyon Sistemleri San.Tic.Ltd.Şti.
2. Connect cables to related connectors
Switch off mains voltage
before connecting cables
3. Adjust magnets for perfect fit
4. Mount Touch Panel
wall
box
panel
Mounting Magnet
This manual suits for next models
1
Other Core Touch Panel manuals
Popular Touch Panel manuals by other brands
IBASE Technology
IBASE Technology ASTUT-152-RE1S user manual
YASKAWA
YASKAWA TP 610C manual
B&R
B&R Power Panel C Series user manual
Beijer Electronics
Beijer Electronics X2 control Hardware and installation manual
AXIOMTEK
AXIOMTEK GOT321W-521 user manual
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Operation manual
