$% '(
1. When the Master switch is pressed ON, the symbols over the command
buttons at the front panel as well as the display will be illuminated.
a. If servo finds a disc, it will show the TOC on the display.
b. If no disc is found the text “NO DISC” is displayed.
$% '% 7*'! #
a. Press the STANDBY button on the front panel or the remote to put the
CDA825 into Standby mode.
b. Press the side of the AC Master switch labelled “O”
$% '% 7,! #
For every day use, it is not necessary to power the CDA825 down completely.
Press the STANDBY button on the front panel or on the remote to leave the
CD-player in its Standby mode.
$ '#
The circular lid is manually opened and closed by rotating the lid to the left or right.
Place the disc gently in the CD housing so that the centre of the disc sits right on the spindle
and place the CD clamp on the top.
Now close the lid. Wait a short time for the CDA825 to read the disc table of contents before
you press PLAY.
The CDA825 is buffering two "moving" second of audio in isolation from the CD-drive before it
is played back. Therefore, the CD-players response to all commands related to playback, is
always two seconds behind in time.
+
Metal surfaces may be cleaned with a damp cloth.
The acrylic display window should only be cleaned with a soft cloth.
Finger print may be removed with a damp cloth. Do not use spirits or paper tissue.
Do not subject the CD-player to high mechanical vibration.
Copland provides a warranty to the first purchaser for a period of two year that the
CD-player will work perfectly. Copland usually commissions the Copland agency in the
country in which the CD-player was purchased to carry out any warranty work.
Following consent from Copland in a particular case the warranty service may
also be claimed at an agency in another country.
