See Website for Full Safety Information
• Do not use in conned space.
• This unit requires 15V DC MAX
• All Coomber equipment is covered by a 12 months warranty against
defective components or faulty manufacture from date of dispatch.
• Any modications to or misuse of the equipment renders this warranty void.
• Equipment that is security marked or damaged cannot,
under any circumstances, be exchanged.
• We reserve the right to change products and specications without notice.
Power connection
………………………………………………….……
Product Instruction Manual
Connecting an iPod or External
audio device
Input Mix Levels
……….……………………..………...……………
• Connect the1858 15V external power supply to the DC in.
WARNING Please check that you have the correct 15V
power supply. Please check this very carefully a higher
power supply will damage this unit.
• Plug the 1858 to the mains supply.
• Switch on power to the unit. Press the on / o button.
The green LED will be lit when powered .
Playing a CD/USB/SD Card
…..…………………………………………………
…………………………………….…………………
• Using the supplied (Coomber part no 41243) 3.5mm jack plug
lead connect the headphone output of the external device
(iPod) to the stereo Aux in.
• Use the external device to play and adjust the volume after it
is plugged in.
• You can use your Coomber to adjust the volume.
Remote control & menu features will not control your external
device.
Rechargeable Models
This unit contains rechargeable batteries
• The LED lights up when the batteries are charging.
• You can charge and use the unit at the same time, if the
DC power is unplugged the unit will continue playing.
Please fully charge the batteries before storage.
44500 Series
…………………………………………………….…
• Each input has its own volume level, as a starting point set
all to half volume then adjust each one to your desired
volume.
• E.g. CD volume slightly lower than Microphone so that
your voice can be heard over the music.
• Then use the master volume to adjust the overall volume
to suit the space and audience.
UHF1 Models
A wireless microphone receiver is built
into this unit and precongured ready
for use. Please check the XLR lead is
plugged into the Mic 1 socket.
The microphone is set on channel 1
as a default.
• To operate the microphone install a new battery then
adjust the microphone level and master volume on the
unit to mid point.
• Switch on the microphone, adjust the volume to suit.
Bluetooth
• Turn the unit on. Enable Bluetooth on your device– iPod/
iPhone etc.
• When discovered Audio Device will be displayed on your
device. Select pair or connect on your device.
• An audio notication will be heard and also connected or
paired will be shown on your device.
• You will be able to play music on your device and amplify it
with the Dance Combo.
• Bluetooth range is generally low power Class2 10mtrs
without drop out.
• NOTE: If another device is already paired/connected you will not be able to
pair at the same time. You will need to switch the unit o and on then try
again or turn o the Bluetooth on the other device.
……….……..………………………………………
• FEED a CD printed side up into the slot, the CD can be
CDA format or MP3.
• EJECT - If pressed this will send the disc out.
• SOURCE - When the Source key is pressed you can toggle
between the CD, USB and SD CARD READER.
• FOLDER-When in “stop “mode, select the folder to be
played by scrolling through <<back or >> next folder.
When in the “play” mode, you can skip the track being played
to the next or previous track that is in the folders list by
pressing << or >>.
CAUTION If no sound is heard;
• Check the mute button on the CD, if playing from a CD/
USB/SD Card. Turn up the master volume & input volume to
the desired level.
