Cooke & Lewis CLIND1BK-C User manual
CLIND1BK-C Induction Hob v1e GB_FR
Barcode 5052931055784
FR
GB IE
CLIND1BK-C
[03] x 2
[02] x 2
[01] x 1
3
Induction Hob 04
Table de cuisson à induction 27
Installation 50
CLIND1BK-C
FR
GB IE
4
GB IE
Let's
get started...
Getting started... 05
Before you start 06
Safety 07
In more detail... 09
Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
Technical and legal information
Guarantee
CE Declaration of conformity
10
12
17
19
20
21
24
26
Appendix
50
Installation
5
Getting started...
GB IE
Before you start 06
Safety 07
6
Getting started...
GB IE
Tools required
Before you start
To avoid the risks that are always present when you use
an electrical appliance it is important that this appliance is
installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards. Please keep this
instruction booklet for future reference and pass it on to any
future owners. After unpacking the appliance please check
that it is not damaged. If in doubt, do not use the appliance
but contact Customer Services on 0844 800 1128 (UK), 1
800 535542 (Ireland) and 01 56 48 02 60 (France).
Check the package and make sure you have all of the
parts listed.
Decide on the appropriate location for your product.
If this product contains glass please take care when tting
or handling to prevent personal injury or damage to the
product.
The specications plate is available on this appliance. This
plate displays all the necessary identication information for
ordering replacement parts.
If you sell the appliance, give it away, or leave it behind
when you move house, make sure you also pass on this
manual so that the new owner can become familiar with the
appliance and its safety warnings.
Before you start
SILICONE
7
Getting started...
GB IE
Safety
These instructions are for your safety. Please read through
them thoroughly prior to installation and retain them for
future reference.
This appliance complies with all current European safety legislation,
however, the Manufacturer must emphasise that this compliance does
not prevent the surfaces of the appliance from heating up during use and
remaining hot during its operation.
Accessible parts may become hot during use. Young children should be kept
away. Care should be taken to avoid touching the appliance (e.g hob, cooker).
The Manufacturer highly recommends that this appliance be kept out of the
reach of babies and small children.
Children should be supervised to ensure that they do not play with the
appliance.
This appliance is not intended for use by persons (including children) with
reduced physical sensory, or mental capabilities, or by those who lack
experience and knowledge, unless they have been given supervision and
instruction concerning the use of the appliance by a person responsible for
their safety.
Means for isolating the appliance must be incorporated in the xed wiring
in accordance with the current wiring regulations. An all-pole disconnection
switch having a contact separation of at least 3 mm in all poles should be
connected in xed wiring.
Damaged power cables should be replaced by a competent person or
qualied electrician.
Make sure that the power cord is not caught under or in the appliance and
avoid damage to the power cable.
Do not allow the electric cables to touch the hot parts of the appliance.
Do not install the appliance outdoors in a damp place or in an area which
may be prone to water leaks such as under or near a sink unit. In the event
of a water leak allow the machine to dry naturally.
Please dispose of the packing material carefully.
Do not use ammable sprays in close vicinity to the appliance.
• All installation work must be carried out by a
competent person or qualied electrician.
• This appliance must be installed correctly by a
suitably qualied person, strictly following the
manufacturer’s instructions.
8
Getting started...
GB IE Safety
We also recommend that great care be taken during use and cleaning.
Read the cleaning and maintenance sections for this appliance carefully.
A steam cleaner is not to be used.
The appliance is not intended to be operated by means of external timer or
separated remote-control system.
The appliance is for domestic use only.
When a cooking zone has been on for a long time, the surface remains hot
for some time afterwards so do not touch the metal surface.
Do not store detergents or ammable materials beneath the hob.
Do not leave hot oils or fats unattended as they may catch light.
The Manufacturer declines all liability for personal or material damage as a
result of misuse or incorrect installation of this appliance.
9
In more detail...
In more
detail...
GB IE
Product functions 10
Operation 12
Care and maintenance 17
Troubleshooting 19
Recycling and disposal 20
Technical and legal information 21
Guarantee 24
CE Declaration of conformity 26
10
In more detail...
GB IE Operation
Product functions
> The induction hob caters for all kind of cooking, with its electromagnetic
cooking zones and its electronic touch controls and multi-functions,
making it the ideal choice for the modern family.
> The induction hob is extremely user-friendly, durable and safe.
Working principle
> The induction hob comprises a coil, a hotplate made of ferromagnetic
material and a control system. Electrical current generates a powerful
magnetic eld through the coil. This produces a large number of vortices
that, in turn, generate heat that is then transmitted through the cooking
zone to the pan.
Special functions
Protection from over-heating
A sensor monitors the temperature in the cooking zones. When the
temperature exceeds a safe level, the cooking zone is automatically
switched off.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
Other manuals for CLIND1BK-C
1
Table of contents
Languages:
Other Cooke & Lewis Range manuals
