Introduction
ADI12-8(FIT)GY 5
Handling Precautions
Take the following precautions when handling this module.
-Do not modify the module. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying this module.
-Do not use or store the equipment in a hot or cold place, or in a place that is subject to
severe temperature changes. (Operating temperature range: 0 - 50°C)
-Do not use or store the equipment in a place subject to direct sunlight or near a heating
device, such as a stove.
-Do not use or store the equipment in a dusty or humid place. (Operating humidity
range: 10 - 90%RH, No condensation)
-As this product contains precision electronic components, do not use or store in
environments subject to shock or vibration.
-Do not use or store the product near equipment generating a strong magnetic field or
radio waves.
-If you notice any strange odor or overheating, please unplug the power cord
immediately.
-In the event of an abnormal condition or malfunction, please consult the dealer from
whom the equipment was purchased.
-To avoid electric shock, please do not touch the system with a wet hand.
-Do not open the module casing. CONTEC will disclaim any responsibility for
equipment whose casing has been opened.
-To prevent damage, please do not subject the module to impact or bend it.
-To prevent contact malfunction, please do not touch the metallic pins on the external
module connector.
-The module contains switches that need to be properly set. Before using the module,
please check its switch settings.
-To avoid malfunction, please do not change the module switch settings in an
unauthorized manner.
-"Do not operate the device module when the power for the Controller Module is on.
To avoid malfunction, please be sure to turn off the power for the Controller
Module".
-If you use this product in a noisy environment, attach ferrite cores to the IO cable to
stabilize the operation.
