Consort FANFAIR PFH15T Guide

57000712 Iss 03

If Your Heater Does Not Work

Check re-set of ES Control as described under ‘Thermal Operated Cut-out’.

 Check that the outlet is live. (If it is not live, check the distribution board).

 Should none of the above remedies work, then disconnect heater from the mains and

consult an accredited service agent.

 Do NOT attempt to repair the heater or unscrew the outer casing yourself.

Guarantee

This guarantee is offered to you as an extra benefit and does not affect your legal rights.

All electrical appliances produced for the Company are guaranteed for one year against

faulty material or workmanship. This applies only if the appliance has been used for purposes

in accordance with the instructions provided and has not been connected to an unsuitable

electricity supply, or subject to misuse, neglect, damage or modified or repaired by any

person not authorised by us.

The correct electricity supply voltage is shown on the rating label attached to the

appliance.

Customer Helpline

Should you need any advice on the use of your new Consort product, or should you require

service or repair, please contact our Helpline:

Operating hours:

Monday to Thursday 8.30am to 4.30pm

Friday 8.30am to 3.30pm

Consort Equipment Products Limited

Thornton Industrial Estate, Milford Haven

Pembrokeshire, SA73 2RT

Tel: 01646 692172 Fax: 01646 695195

Email: [email protected] Web: www.consortepl.com

Quality Space Heaters

Using and looking after your

FANFAIR

PFH15T Fan Heater

110 Volt 50/60Hz

57000712 Iss 03

Controls

The fan heater will operate immediately power is supplied. However, with thermostat this is

dependent on room temperature.

Check that the supply details on your heater are in accordance with your electricity supply.

The heater carries a 'Do Not Cover' label to warn the user that if the appliance is covered,

there is a risk of overheating.

Thermostat Control

To set the thermostat to the required temperature, turn the control knob fully clockwise.

When the desired room temperature is reached, turn the knob slowly anti-clockwise and when

the thermostat 'clicks' off, leave the control at this setting. Thereafter, the fan heater will

control the heat output automatically.

A neon indicator is fitted which remains illuminated all the time that it is connected to the

mains supply.

WARNING: THIS APPLIANCE MUST BE EARTHED

The heater is suitable for connection to a 110V 50/60Hz single phase AC supply. The heater

consumes 1500 Watts when switched to the full heat position. The heater should be wired via

a suitable isolator switch and in accordance with BS 7671 17th edition of the wiring

regulations.

Thermal Operated Cut-out

The appliance is fitted with an Electronic Safety Control (ES). This is a safety device, which

switches the heater 'Off', if for any reason the appliance overheats. The ES Control can only

be re-set after the appliance has cooled down. In order to re-set the ES Control, proceed as

follows:

 Switch off appliance and leave for approximately 5 minutes.

 Switch appliance back on and ES Control will re-set.

 Ensure that the appliance is functioning correctly. If the ES Control operates again, the

appliance should be checked by a competent electrician.

Cleaning

Always disconnect the heater from the mains before cleaning.

The fan heater should not require any maintenance, but it is strongly advised that it be kept

clean. An occasional wipe over with a soft cloth is all that should be necessary.

 Do not use metal or furniture polish on any part of the heater

 Do not touch the heater with wet hands or in any way bring water in contact with it.

The supply cord on this appliance can only be replaced by the use of special tools, and should

any damage or fault occur to the heater, it must be serviced by an accredited service agent.

IMPORTANT:

ALWAYS RETAIN YOU USER INSTRUCTIONS FOR FUTURE REFERENCE.

Safety

This equipment has been designed and manufactured to the highest international standard,

but, like all electrical appliances which are operated by mains voltage, care must be taken if

you are to obtain the best results and safety is to be assured.

 Do NOT use this appliance in bathrooms or where similar conditions of excessive moisture

are present.

 Do NOT handle the appliance with wet hands.

 Do NOT use the appliance in workshops or rooms where excessive dust is generated or

present.

 Ensure that nothing is pushed into any aperture of this appliance.

 Do NOT touch outlet grille when appliance is in use.

 Do NOT leave the appliance unattended where young children are present.

This appliance meets the requirements of EU Directive 89/336/EEC for EMC.

Frost Watch Setting:

To set the heater on ‘Frost

Watch’, ensure the Mains supply is

connected and that the heat

position has been selected on the

Heat control Switches, rotate the

Thermostat control Knob fully

Anti-Clockwise to its Stop. The

heater will now operate

automatically should the

temperature fall below 50C.

Other Consort Heater manuals

Consort

Consort LST500SL Use and maintenance manual

Consort

Consort LST500E Use and maintenance manual

Consort

Consort Heatflow BFH2T Installation and operating instructions

Consort

Consort PLSTi100 User manual

Consort

Consort WMH3E Use and maintenance manual

Consort

Consort PLSTI050EWIFI Use and maintenance manual

Consort

Consort PLSTi150RX Use and maintenance manual

Consort

Consort QZWP30N Manual

Consort

Consort PLC050/NC/TI(SS) Manual

Consort

Consort UHA05 Use and maintenance manual

Consort

Consort CSL1LST Use and maintenance manual

Consort

Consort HE6502SL Use and maintenance manual

Consort

Consort CN2LSTRX User manual

Consort

Consort LST500 Manual

Consort

Consort RWH2S Manual

Consort

Consort PLE050 Use and maintenance manual

Consort

Consort CN1MLSTFS User manual

Consort

Consort Frost Fighter User manual

Consort

Consort CN2FSLT Use and maintenance manual

Consort

Consort PVSL050 Use and maintenance manual

Consort

Consort PLE200/SS User manual

Consort

Consort WMH3RX Manual

Consort

Consort PLSTi050E Use and maintenance manual

Consort

Consort Heatsream PHRX Series User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide