Condair MN Series User manual

PLANNING AND INSTALLATION

INSTRUCTIONS

Condair HumiLife - The flexible room solution

Condair MN

2600432-F EN UL 2206

Humidication and Evaporative Cooling

IMPORTANT! Read and save these instructions.

This manual to be left with the equipment.

Thank you for choosing Condair

Installation date (MM/DD/YYYY):

Commissioning date (MM/DD/YYYY):

Site:

Model:

Serial number:

Contact

Condair Ltd.

2740 Fenton Road, Ottawa, Ontario K1T3T7

TEL: 1.866.667.8321, FAX: 613.822.7964

EMAIL: na.humilife@condair.com, WEBSITE: www.condairhumilife.com

Proprietary Notice

This document and the information disclosed herein are proprietary data of Condair Ltd. Neither this document, nor

the information contained herein shall be reproduced, used, or disclosed to others without the written authorization

of Condair Ltd., except to the extent required for installation or maintenance of recipient's equipment.

Liability Notice

Condair Ltd. does not accept any liability due to incorrect installation or operation of the equipment or due to the

use of parts/components/equipment that are not authorized by Condair Ltd.

Technical modications reserved

3Contents

Contents

1 Introduction 5

1.1 First things rst! 5

1.2 Information about the planning and installation instructions 5

2 For your safety 7

3 Product overview 10

3.1 Product designation 10

3.2 System overviews 11

3.3 System description 15

3.4 Spray circuit design 19

3.5 Options 20

4 Planning a Condair MN system 22

4.1 Note on the water supply to the Condair MN 22

4.2 Determining the number of humidier units 22

4.3 Conguring the central unit 22

4.4 Calculating cable and hose lengths 23

4.5 Information on positioning the central unit and water lter(s) 24

4.6 Information on positioning of the components of the optional reverse osmosis system

Condair RO-HB 25

4.7 Positioning the humidier units 30

4.8 Water supply requirements 31

4.8.1 Water supply requirements (without RO system) 31

4.8.2 Water supply requirements for the reverse osmosis system Condair RO-HB 31

4.9 Water outlet requirements 32

4.10 Power supply requirements 32

4.11 LAN connection requirements 33

4.12 Information on servicing the Condair MN 33

4.13 Delivery scope overview 34

5 Preparatory installations 35

5.1 Checking delivery / Storage and transport 35

5.1.1 Checking delivery 35

5.1.2 Storage and transport 35

5.2 Tools required for installation 36

5.3 Preparatory installations overview 37

5.4 Preparatory installations for ush-mounting humidier units in new buildings with concrete ceilings 39

5.4.1 Install installation boxes for ush-mounting in concrete ceilings 39

5.4.1.1 Flush-mounting installation boxes for concrete ceilings 39

5.4.2 Laying the guide pipes 40

5.4.3 Drilling installation openings in the installation boxes 43

5.5 Preparatory installations for ush-mounting humidier units in suspended ceilings 44

5.5.1 Drill installation openings in the suspended ceilings 44

5.5.2 Laying the guide pipes 44

4Contents

5.6 Preparatory installations for surface-mounting humidier units 45

5.6.1 Drill wall duct(s) 45

5.6.2 Laying cable ducts 46

5.7 Installing the central unit and water lter(s) in the housing 47

5.8 Installing the components of the optional reverse osmosis system Condair RO-HB 49

5.9 Setting up water inlet and outlet 50

5.9.1 Information on water installation 50

5.9.2 Water installation overview 52

5.9.3 Installing a drain funnel with trap for peripheral drain module(s) 53

5.9.4 Feeding in hoses and CAN bus cables 54

6 Technical data 57

6.1 Central unit technical data 57

6.2 Humidier unit technical data 58

6.3 Hose technical data 58

6.4 CAN bus cable technical data 58

6.5 Flush-mounting installation box/guide pipes technical data 58

6.6 Technical data optional reverse osmosis system Condair RO-HB 58

5Introduction

1 Introduction

1.1 First things rst!

Thank you for choosing the Condair MN.

The Condair MN has been built using state-of-the-art technology and in accordance with the latest safety

regulations. However, improper installation and use of the Condair MN may put users and/or third parties

at risk and may also cause damage to material assets.

To ensure safe, proper and cost-efcient operation of the Condair MN, please observe and comply with

all information and safety instructions in this documentation and in the instructions to the components

built into the humidier system.

Should you have any questions after reading these instructions, please contact your local Condair rep-

resentative. They will be pleased to help you.

1.2 Information about the planning and installation instructions

Delimitations

These planning and installation instructions are for the Condair MN in its various congurations. Options

and accessories are only described insofar as is necessary for proper planning and installation. Please

see the relevant instructions for additional information on the options and accessories.

If the Condair MN system is operated with the optional reverse osmosis system Condair RO-HB, the

english version of the installation and operation manual for the reverse osmosis system Condair RO-

HB can be downloaded using the following QR code:

The information in these instructions is limited to the planning and preparatory installation of a Condair

MN system and is aimed at groups of people who are appropriately trained and sufciently qualied for

the work in question.

These planning and assembly instructions are accompanied by various separate documents which are

included with delivery. Where necessary, these instructions may refer to these publications.

6Introduction

Symbols used in this manual

CAUTION!

The signal word “CAUTION” together with the hazard symbol in a circle indicates

information provided in this documentation which, if ignored, could lead to damage

and/or the failure of the device or other equipment.

WARNING!

The signal word "WARNING", together with the general hazard symbol, indicates

safety and hazard information given in this documentation which, if ignored, could

lead to injury to people.

DANGER!

The signal word "DANGER", together with the general hazard symbol, indicates safety

and hazard information given in this documentation which, if ignored, could lead to

serious injury or even death to people.

Storage

Keep this documentation in a safe place for further use. If these instructions are lost or if you are unsure

whether this documentation is still up to date, please contact your Condair representative.

Language versions

This documentation is available in various languages. For more information, please contact your Condair

representative.

7For your safety

2 For your safety

General

All persons tasked to perform work on the Condair MN must read and ensure they have

understood the planning and installation instructions as well as the operating manual

for the Condair MN before starting work.

An understanding of the content of these planning and installation instructions and the

operating manual is a basic prerequisite for protecting personnel from danger, avoiding

improper installation and operating the device safely and properly.

All pictograms, signs and markings applied to the Condair MN components must be

observed and kept in a clearly legible condition.

Personnel qualications

All work described in this documentation may only be carried out by trained and suit-

ably qualied staff authorised by the operator.

Furthermore, for safety and warranty reasons, interventions may only be undertaken

by specialist personnel authorised by Condair.

It is assumed that all persons entrusted to work on the Condair MN are familiar with and

abide by the regulations on occupational health and safety and accident prevention.

Proper use

The Condair MN is intended only for direct air humidication of rooms within the speci-

ed operating parameters (see operating manual for the Condair MN). Any other use

without the written permission of Condair is deemed to be improper use and can render

the Condair MN hazardous.

Proper use also demands that all information in this documentation and the operating

manual (in particular, all safety and hazard information) is duly observed.

8For your safety

Hazards that may arise from the Condair MN:

DANGER!

Risk of electrocution

The Condair MN's central unit runs on mains power. If the central unit is open, live

parts may be touched. Touching live parts may cause severe injury or death.

That is why the central unit must be switched off and disconnected from the

mains power supply (remove the plug from the socket) before the central unit

is opened.

Warning!

UVC radiation

A UV lamp is built into the Condair MN's central unit. In principle this should

pose no risks, as it is installed in a radiation-proof housing. If the UV lamp is

operated outside of this housing, harmful UVC radiation may be released. This

may cause damage to the eyes and skin.

That is why the UV lamp must never be operated outside of the protective hous-

ing. The central unit must be switched off and disconnected from the mains

power supply (remove the plug from the socket) before the central unit is opened.

Warning!

Waste from damaged UV lamps may lead to injury and cause damage to human

health and harm to the environment.

That is why the waste from damaged UV lamps must be disposed of in accor-

dance with local provisions on hazardous substances and the site of the dam-

age must be cleaned properly.

CAUTION!

Leaky or defective water pipes/connections may lead to water damage.

That is why the central unit and any peripheral drain modules should, where

possible, be installed in a technical room with a water outlet that is only acces-

sible to a limited number of people.

We recommend equipping the central unit water outlet with hose breakage protection

(washing machine connection, by customer) or with leakage monitoring (by customer),

ensuring the water supply if the outlet pipe breaks.

9For your safety

Preventing hazardous operating conditions

If it is suspected that safe operation is no longer possible, the Condair MN should

immediately be shut down and secured against accidental power-up. Then, contact

the Condair representative. This can be the case under the following circumstances:

– if components of the Condair MN are damaged

– if the electrical installations are damaged

– if the Condair MN is no longer operating correctly

– if connections and/or piping are not sealed

All persons working with the Condair MN must report any alterations to the unit that

may affect safety to the Condair representative.

Unauthorized modications to the device

No additions or modications may be made to the Condair MN without the written

permission of Condair.

When replacing any defective components of the device, use only genuine accessories

and spare parts from your Condair representative.

10 Product overview

3 Product overview

3.1 Product designation

The identication of the product is found on the specication label on the right side of the central unit:

Fig. 1: Location of the specication label

Condair Ltd., 2740 Fenton Road, Ottawa, Ontario K1T3T7

Type: Condair MN Serial-No: XXXXXXX 02.20

Voltage: 115 1~ / 60Hz Power: max. 200 W

Max. Humidier capacity: 8.81 lbs/hr

Water pressure: 43.5 psi .. 72.5 psi Mesh technology humidier

Engineered in Switzerland, Made in Germany

Production

Month/Year

Serial number (7 digits)Type designation

Supply voltage

Maximum humidication capacity

Permissible water supply pressure

Field with certication symbols

Power consumption

Humidier technology

Other manuals for MN Series

This manual suits for next models

Table of contents

Other Condair Humidifier manuals

Condair

Condair MD Series User manual

Condair

Condair GS II Series User manual

Condair

Condair GS OC Series Guide

Condair

Condair ME series Installation and operating instructions

Condair

Condair SOFT 10 User manual

Condair

Condair ME series User manual

Condair

Condair HumiLife RH Series Planning guide

Condair

Condair HumiLife RE Series User manual

Condair

Condair Nortec RS Series Installation and operation manual

Condair

Condair Nortec GS II Series User manual

Condair

Condair DL Series User manual

Condair

Condair ABS3 User manual

Condair

Condair Nortec RS Series User manual

Condair

Condair Links Series User manual

Condair

Condair US Series User manual

Condair

Condair GS C Series Guide

Condair

Condair SE series User manual

Condair

Condair Nortec GSTC User manual

Condair

Condair HP User manual

Condair

Condair Esco Series User manual

Condair

Condair Nortec EL-Series Installation and operation manual

Condair

Condair DL User manual

Condair

Condair Nortec RS Series User manual

Condair

Condair HumiLife RH Series User manual

Popular Humidifier manuals by other brands

Boneco

Boneco H300 manual

Bionaire

Bionaire CM1 Instruction leaflet

Air-O-Swiss

Air-O-Swiss AOS 7131 Instructions for use manual

KING

KING K 5002 Rainbow instruction manual

Crane

Crane EE-6902 instruction manual

Glaziar

Glaziar Ness user manual

Philips

Philips DreamStation Go Faqs

Honeywell

Honeywell MISTMATE HUL520BC manual

Stadler Form

Stadler Form Hera Operation instructions

Hunter

Hunter 31206 owner's guide

TaoTronics

TaoTronics TT-AH004 user guide

adorini

adorini Cigar Heaven manual

Lanaform

Lanaform Aroma user manual

Aprilaire

Aprilaire 800 Series user manual

Pyle

Pyle SereneLife PHUMDIF8 Instruction book

Trotec

Trotec B 200 operating manual

Pure Humidifier

Pure Humidifier EC Series installation instructions

Crane

Crane EE-864 instruction manual