Comtrend Corporation CT-5072T User manual
1
Comtrend 1 Port Router
Installation Guide
CT-5072T
Comtrend Router Installation
1
Installing Access Point’s DS Service with a Comtrend Router
Thank you for selecting Access Point, Inc. to be your Internet service provider. This guide will walk you
through connecting your DSL router and getting your DSL service up and running.
This guide is for new DSL activations only. If you currently have DSL and are switching to Access Point
you will need to schedule your activation by calling 00-957-646 . This guide was created to assist with
installing Comtrend 5072T routers. If you were provided a different type of equipment, you may need to
contact Access Point’s Customer Service Department at 00-957-646 .
You should have received a DSL confirmation e-mail that contains all of your installation specific
information. You will need the information from that e-mail to complete the installation of your DSL
service. Please be sure that you have your confirmation e-mail when you are completing your self-install.
If you do not have your DSL confirmation e-mail, please contact our Customer Service Department and
they will be able to fax or e-mail you the information.
Now that you have all your package contents and network cables, it's time to set up your hardware.
Please follow these instructions.
1. Connect the power adapter to the power connector on the back of your DSL router and plug
your power adapter into a power outlet. Using a power strip with surge protection or a UPS is
highly recommended.
2. Check that your router is successfully powered up by confirming that the power LED on the
router lights up. Be sure that the router is turned on, by using the switch on the back of the
router.
3. Connect your computer to the back of the router using an RJ-45 Ethernet cable. You should
use the yellow Ethernet port on the back of the router.
4. Connect the DSL filter to your wall jack. One side of the filter will connect to your DSL router;
the other side can be connected to your fax machine or a standalone phone. Plug your DSL
telephone line into the grey RJ-11 port on the back of your router.
After the router has powered up, you can turn on your computer and finish the installation by connecting
directly to the Comtrend router. If your computer is set to use a dynamic IP address (DHCP), it should
obtain the correct IP address from the router. If your computer is set to use a static IP address, you will
need to re-configure your IP settings. If you need to set the static IP address of your computer, you can
use an address in the 192.16 .1.x range. Do not use 192.16 .1.1 that is the default address of the
router.
If you have any trouble or issues setting up your DSL equipment, please contact our customer service
department at 1- 00-957-646 .
Comtrend Router Installation
2
ogin Screen
Open an internet browser and go to http://192.16 .1.1. You will be prompted with a login screen for the
router. The default login name is root and the password is 12345.
Device Information Screen
Once you are logged into the router, you will see the Device Info screen. Click on the Advanced Setup
tab to begin configuration of your modem.
Click the Layer 2 Interface option on the left. Then click the Add button
Comtrend Router Installation
3
Configure the DS Interface
Using the information from your DSL confirmation e-mail, enter the correct VPI and VCI information for
your installation. Your VPI and VCI information may be different than what is pictured in this document.
You must use the information from your e-mail. Under the Select Connection Option, choose MSC Mode.
Do not change any other options on this page. Do not enable the QoS box. Then click Apply/Save.
Select PPPoE as the connection type
On the next page, you will need to setup your WAN service. Select the WAN Service option from the left
hand tab. Then select Add.
-
Comtrend Router Installation
4
Do not make any change to thi page. Ju t elect Next
En ure that PPPoE i the WAN ervice type, then click Next.
-
Comtrend Router Installation
5
Enter your PPPoE username and password
You will need to enter the PPPoE username and password for your router. Your username and password
can be found on your DSL confirmation e-mail. If you did not get your username and password, please
contact our customer service department at 1- 00-957-646 .
Enter your username and password. The PPPoE service name should be API DSL. Leave the
authentication method as Auto. Select the Enable Nat and Enable Firewall check boxes. Click Next
-
Comtrend Router Installation
6
Click Next on the Routing screen.
Click Next on the DNS Server screen
Comtrend Router Installation
7
Once you get to the WAN Setup Summary screen, click Apply/Save. This will save your router
configuration
At this point, the basic configuration of the router has been completed. To ensure that your DSL service
is working, check the Internet and ADSL lights on the router. They should both be solid green. Your DSL
service should now be working.
-
Comtrend Router Installation
8
Reset Your ogin Password
For security reasons, you may want to reset the default password for the root user. Under the
Management option, select Access Control.
In the Select an account section, choose root. Once you have selected the root username, you will need
to reset the password. Enter the default password which should be 12345. You will then need to enter
the new password and confirm the new password. Please use your Access Point, Inc. account number
as the password for the router. Your API account number can be found on the DSL Confirmation e-mail
that was sent to you. Once you have confirmed the new password, click Save/Apply.
-
Comtrend Router Installation
9
Troubleshooting
So that Access Point can better assist you in case of a trouble, you will need to enable some remote
management tools. On the left side of the window, select Management, Access Control, then Service
Access.
Please make sure that the HTTP and ICMP options are both set to LAN+WAN. This will assist us with
troubleshooting your DSL circuit if needed. After you have set both options, click Save/Apply.
This should complete your DSL router setup.
A complete user guide for your equipment is located on the CD that was shipped with your DSL router.
You can also download the complete user guide from the Access Point, Inc website.
If you have any trouble or issues setting up your DSL equipment, please contact our Customer Service
department at 1- 00-957-646 .
Other manuals for CT-5072T
2
Other Comtrend Corporation Network Router manuals
Comtrend Corporation
Comtrend Corporation CT-5624S User manual
Comtrend Corporation
Comtrend Corporation AR-5319 User manual
Comtrend Corporation
Comtrend Corporation AR-5381u User manual
Comtrend Corporation
Comtrend Corporation CT-510 User manual
Comtrend Corporation
Comtrend Corporation VR-3031u User manual
Comtrend Corporation
Comtrend Corporation VR-3033 User manual
Comtrend Corporation
Comtrend Corporation CT-5072T User manual
Comtrend Corporation
Comtrend Corporation AR-5312u User manual
Comtrend Corporation
Comtrend Corporation ES-7201PoE User manual
Comtrend Corporation
Comtrend Corporation CT-5071E User manual
Comtrend Corporation
Comtrend Corporation ES-7205 User manual
Comtrend Corporation
Comtrend Corporation VR-3030 User manual
Comtrend Corporation
Comtrend Corporation NEXUSLINK 3111u User manual
Comtrend Corporation
Comtrend Corporation NexusLink 3120 User manual
Comtrend Corporation
Comtrend Corporation WAP-5940 User manual
Comtrend Corporation
Comtrend Corporation CT-5611TC User manual
Comtrend Corporation
Comtrend Corporation ER-5845n User manual
Comtrend Corporation
Comtrend Corporation CT-5364A User manual
Comtrend Corporation
Comtrend Corporation CT-5621T User manual
Comtrend Corporation
Comtrend Corporation AR-5389 User manual
