Comnet CWFE8MS/DIN User manual
INSTALLATION AND OPERATION MANUAL
CWFE8MS/DIN
INDUSTRIAL GRADE MANAGED
ETHERNET SWITCH WITH (8) 10/100TX PORTS
V2.0 – March 2011
The ComNet CWFE8MS/DIN Managed Ethernet Switch provides transmission of 10/100 BASE-T Ethernet data.
These units are available for use with conventional CAT-5e copper transmission media. Up to 8 electrical ports
are available for easily implementing point-to-point, linear add-drop, drop-and-repeat, star or true self-healing
ring and mesh network system architectures. The electrical ports support the 10/100 Mbps (10/100 BASE-TX)
Ethernet IEEE 802.3 protocol. Auto-negotiating and auto- MDI/MDIX features are provided for simplicity and ease
of installation. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever
required. The CWFE8MS/DIN incorporates LED indicators for monitoring the operating status of the managed
switch and network.
FCC Warning
This Equipment has been tested and found to comply with the limits for a Class-A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. It may cause
harmful interference to radio communications if the equipment is not installed and used
in accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Content
Chapter 1 Introduction..............................................................1
1.1 Hardware Features............................................................1
1.2 Software Features .............................................................3
1.3 Package Contents .............................................................6
Chapter 2 Hardware Description..............................................7
2.1 Physical Dimensions..........................................................7
2.2 Front Panel........................................................................7
2.3 Bottom View.......................................................................8
2.4 DIP-switch..........................................................................9
2.5 LED Indicators.................................................................10
Chapter 3 Hardware Installation ............................................11
3.1 Installation Steps .............................................................11
3.2 DIN-Rail Mounting ...........................................................12
3.3 Wall Mount Plate Mounting..............................................14
3.4 Cabling.............................................................................15
3.5 Wiring the Power Inputs...................................................15
3.6 Wiring the Fault Alarm Contact........................................16
Chapter 4 Network Application..............................................17
4.1 X-Ring Application...........................................................18
4.2 Coupling Ring Application................................................19
4.3 Dual Homing Application .................................................20
Chapter 5 Web-Based Management......................................21
5.1 About Web-based Management......................................21
5.2 Preparing for Web Management......................................22
5.3 System Login...................................................................22
5.4 System Information..........................................................24
5.5 Port status........................................................................25
5.5.1 Single Port Information.............................................................26
5.6 Port Statistics...................................................................27
5.7 Port Control......................................................................27
5.8 Port Mirroring...................................................................28
5.9 VLAN configuration..........................................................30
5.9.1 Port-based VLAN......................................................................31
5.9.2 802.1Q VLAN ...........................................................................34
5.10 Alert ...............................................................................39
5.10.1 Email Alert Configuration........................................................39
5.10.2 Event Configuration................................................................40
5.10.3 Power Alarm Configuration.....................................................42
5.11 IP Configuration.............................................................42
5.12 SNTP Configuration.......................................................43
5.13 IP Security .....................................................................44
5.14 RSTP Configuration.......................................................46
5.14.1 System Configuration.............................................................46
5.14.2 Per Port Configuration............................................................48
5.15 X-Ring............................................................................49
5.16 QoS Configuration.........................................................51
5.17 IGMP..............................................................................54
5.18 Security Manager...........................................................55
5.19 SNMP Configuration......................................................56
5.19.1 System Options......................................................................56
5.19.2 Community strings..................................................................56
5.19.3 Trap Manager.........................................................................57
5.20 Configuration Backup ....................................................58
5.20.1 TFTP Restore Configuration...................................................58
5.20.2 TFTP Backup Configuration...................................................58
5.21 TFTP Update Firmware.................................................59
5.22 Factory Default ..............................................................60
5.23 Save Configuration........................................................60
5.24 System Reboot..............................................................61
5.25 Rate Control...................................................................61
5.26 System Log....................................................................62
5.26.1 System Log Configuration......................................................62
5.26.2 Event Configuration................................................................64
Trouble Shooting.....................................................................66
Appendix A-RJ45 Pin Assignment ........................................67
1
Chapter 1 Introduction
The CWFE8MS/DIN managed Ethernet switch is a cost-effective solution and meets the
high reliability requirements demanded by commercial applications. The CWFE8MS/DIN
managed Ethernet switch can be easily managed through the Web GUI. It also provides
the X-Ring function that can prevent network connection failures.
1.1 Hardware Features
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure
IEEE802.1d spanning tree /
IEEE802.1w rapid spanning tree
IEEE802.1p class of service
IEEE802.1Q VLAN Tag
Protocol CSMA/CD
Technology Store and forward switching architecture
Transfer Rate 14,880 bps for Ethernet port
148,800 bps for Fast Ethernet port
Transfer packet size 64bytes to 1522 bytes (with VLAN tag)
MAC address 2K MAC address table
Memory Buffer 1Mbits
2
Back-plane 1.6 Gbps
Packet throughput
ability 2.38Mpps @64bytes (8TX)
LED
Per port: Link/Activity (Green), Full duplex/Collision (Yellow)
Per unit: Power (Green)
Power 1 (Green)
Power 2 (Green)
Fault (Yellow)
Master (Green)
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)
Power Supply
12 ~48 VDC
Redundant power with polarity reverse protect function and
connective removable terminal block for master and slave
power
Power consumption 6.72 Watts
Install DIN rail kit and wall mount ears are provided for wall mount or
DIN-rail cabinet install
Alarm
Provides one relay output for port breakdown, power failure
and provides DIP-switch to mask link down port.
Alarm Relay current carry ability: 1A @ DC24V
Operation Temp. 0to 70(32to 158)
3
Operation Humidity 5% to 95% (Non-condensing)
Storage
Temperature -40to 85
Case Dimension IP-30, 54 mm (W) x 135 mm (H) x 105mm (D)
EMI
FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS),
CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE
EN61000-4-8, CE EN61000-4-11,
CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4
Safety UL, cUL, CE/EN60950-1
Stability testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)
1.2 Software Features
Management
SNMP management
Web interface management
One default button for system default setting
Packet filter
4 selection rules for different type of packet combination:
All of packet
Broadcast/ multicast/ unknown unicast packet
Broadcast/ multicast packet
Broadcast packet only
4
SNMP MIB
RFC 1213 MIBII
RFC 1493 Bridge MIB
RMON RFC 1757
RFC 2674 VLAN MIB
RFC 1643 Ethernet like MIB
RFC1215 Trap MIB
IGMP MIB.
Private MIB for switch information, X-Ring, port alarm, TFTP
firmware upgrade, reset, port mirror, IP security
SNMP Trap
Up to 3 Trap stations
Cold start, Port link Up, Port link down, Authentication Failure
Private Trap for power status
Port Alarm configuration
Fault alarm, X-Ring
Class of service IEEE802.1p class of service support
Per port provides 4 priority queues
Quality of service The quality of service support port based
Tag based and IPv4 Type of service
X-Ring
2 ports for X-Ring to provide redundant backup feature and
the recovery time below 300ms. It also supports coupling ring
function. Ring and coupling port configure by web interface
and ringmaster by hardware DIP switch
VLAN
Port based VLAN
IEEE802.1Q Tag VLAN
Both of port based and Tag based VLAN group up to 64
VLANs
Table of contents
Other Comnet Network Router manuals
Comnet
Comnet CWGE9MS User manual
Comnet
Comnet CWFE8TX8MS User manual
Comnet
Comnet CWGE2FE8MSPOE User manual
Comnet
Comnet NW7/M User manual
Comnet
Comnet reliance RL1000GW User manual
Comnet
Comnet CNGE8US Series User manual
Comnet
Comnet CNGE8FX4TX4MS User manual
Comnet
Comnet CWFE2COAX Owner's manual
Comnet
Comnet CNGE2FE8MSPOE User manual
Comnet
Comnet CLFE4+1SMS[POE](C User manual
Comnet
Comnet CNFE4+1SMSM2 User manual
Comnet
Comnet CNGE5MS User manual
Comnet
Comnet CWGE24MS2 User manual
Comnet
Comnet CNGE2FE24MS User manual
Comnet
Comnet CNGE3FE7MS4 User manual
Comnet
Comnet CNGE24MS User manual
Comnet
Comnet CNGE3FE8MSPOE User manual
Comnet
Comnet RLXE4GE24MODMS User manual
Comnet
Comnet CNGE11FX3TX8MS User manual
Comnet
Comnet CNGE24MS-OB User manual
