CommFront USB30-HUB-2 User manual
Revision: 1.0 www.CommFront.com Page 1 of 4
Industrial 7-Port USB 3.0 Hub
(Part Number: USB30-HUB-2 (3.0/7-Port))
Http://www.CommFront.com
Revision: 1.0 www.CommFront.com Page 2 of 4
■ INTRODUCTION
The USB30-HUB-2 (3.0/7-Port) is a rugged, industrial-grade 7-Port USB 3.0 hub (backward
compatible with USB 2.0/1.x) that can be used to expand one USB 3.0 port into seven.
This product supports data rates up to 5Gbps and it comes with 1 upstream USB 3.0 port
(type B) and 7 downstream USB 3.0 ports (type A). The unit delivers up to 900mA
downstream power on each port and it features 15kV ESD protection, 600W surge
protection, and plug-and-play (hot-pluggable). This industrial USB 3.0 hub comes with
redundant DC power input and thanks to the professional casing design and mounting
brackets (included), the product can be mounted on a DIN rail, a wall, or a panel, making
it an ideal solution for all types of industrial USB expansion applications.
■ FEATURES
Industrial grade enclosed in a rugged steel housing
USB 3.0 hub, backward compatible with USB 2.0/1.x
Expands one USB 3.0 port into seven: 7 downstream USB 3.0 ports (type A);
1 upstream USB 3.0 port (type B)
Supports data rates up to 5Gbps
900mA downstream power on each port
Plug and play (hot-pluggable)
Redundant 9 to 24VDC input via terminal block or DC jack
DIN-Rail or wall/panel mounting (kit included)
Operating temperature: 32ºF to 104ºF (0ºC to 40ºC).
Built-in 15kV ESD protection (USB interface)
Built-in 600W surge protection (power input on each port)
Surface Mount Technology manufactured to RoHS and ISO-9001 standards
Compliance: CE, FCC
5-year manufacturer’s warranty
■ SPECIFICATIONS
Compatibility: USB 3.0 (backward compatible with USB 2.0/1.x)
Power Source: Redundant 9 to 24VDC (sold separately)
Data Rates: Up to 5Gbps
Connectors: Upstream: 1x type B; Downstream: 7x type A
Distances: USB: 16ft (5m)
Accessories: 1x 6.6ft (2m) USB 3.0 type A to B cable
ESD Protection: 15kV, USB interface
Sur
g
e Protection: 600W, power input, each port
Dimensions (H x W x D): 6.0 x 2.7 x 1.0 in (152 x 69 x 25 mm) (without
brackets)
Dimensions (DC Barrel Plu
g
): Ø5.5mm / Ø2.1mm
Wei
g
ht: 22 oz (620
g
)
Mounting: DIN rail or wall/panel mount (kit included)
Operating Temperature: 32ºF to 104ºF (0ºC to 40ºC)
Storage Temperature: -4ºF to 122ºF (-20ºC to 50ºC)
Operating Humidity: 0~85% RH (non-condensing)
Industrial 7-Port USB 3.0 Hub
Part Number: USB30-HUB-2 (3.0/7-Port) (DIN-Rail/Wall Mount)
Revision: 1.0 www.CommFront.com Page 3 of 4
■ USB 3.0 CONNECTOR PINOUTS
USB 3.0 Type B Upstream Port USB 3.0 Type A Downstream Port
Pin Si
g
nal Name Description
Type A Type B
1 VBUS 5VDC Power
2 D-
USB2.0 data pair
3 D+
4 GND Ground for power return
5 StdA_SSTX- StdB_SSTX-
SuperSpeed transmitter pair
6 StdA_SSTX+ StdB_SSTX+
7 GND_DRAIN GND_DRAIN Ground for signal return
8 StdA_SSRX- StdB_SSRX-
SuperSpeed receiver pair
9 StdA_SSRX+ StdB_SSRX+
Shell Shield Metal housing
■ PACKING CONTENTS
USB30-HUB-2 x1
6.6ft (2m) USB 3.0 type A to B cable x1
DIN-Rail & wall/panel mounting kit x1
Terminal block x1
■ INSTALLATIONS
FIGURE 1: DIN-RAIL OR WALL/PANEL MOUNTING
Revision: 1.0 www.CommFront.com Page 4 of 4
■ DIMENSIONS
FIGURE 2: USB30-HUB-2 (3.0/7-Port) DIMENSIONS
■ DRIVER INSTALLATION NOTES
Driver installation will start automatically when the USB30-HUB-2 is connected to your
computer for the very first time, and it typically takes about 5 to 10 minutes to
complete. Once drivers are successfully installed, two USB 2.0 hubs and two USB 3.0
hubs will show up under the Device Manager (Windows).
Once drivers are successfully installed, you can connect your USB devices to the
USB30-HUB-2 and it typically takes about 1 to 3 minutes for the new devices to work.
■ TROUBLESHOOTING
Once drivers are successfully installed, check Device Manager (Windows) and be sure
that two “USB 2.0 hub” and two “USB 3.0 hub” show up under “USB Serial Bus
Controllers” when the USB30-HUB-2 is connected to your computer.
Check Device Manager (Windows) and be sure that your new USB devices show up
under their respective categories, e.g. mouse, keyboards, or imaging devices, etc.
* Please note that if it is the first time you connect a new USB device to the
USB30-HUB-2, it typically takes about 1 to 3 minutes for the new USB device to work.
Other CommFront Switch manuals
